Gearbox linkage

Tightening shaft on gear linkage.
Dimensions: 6 x 32 mm
Original Volkswagen Classic Parts.

For VW Transporter T25 / T3, 08/1982 ->07/1992
from chassis no. 24-D-000 001->

Complete gearshift repair kit for VW Transporter T25 / T3, Bus, Caravelle, Syncro, Joker, Westfalia from 08/1982 to 07/1992.Indispensable for repairing a linkage with excessive play, often responsible for difficult shifting.The kit is intended for 5-speed gearboxes only.The bellows under OEM reference 251711248A is not included (Mecatechnic reference: KS00120).This kit includes :Clamping nut: ref OE 251711246ADamping ring for clamping nut: ref OE 251711226Retaining clips: ref OE N0124383Retaining clips: ref OE N0122832Pressure spring for clamping nut: ref OE 251711247ACap: ref OE 251711242ARelease spring: ref OE 251711244BRelease ball: ref OE N025663

Gear shift cable stop for Volkswagen New Beetle
For VW New Beetle all models with cable shift control
For left or right cableSold individually

This complete gearbox control lever for 2cv and derivatives - 660mm - Stainless Steel is of a higher quality than the original.

Its curved stainless steel shaft will guarantee flawless durability, more precise control of the gearbox and will add a premium touch to your interior.
Compatible with all models of 2cv, saloons or vans, 6V or 12V.

Gearbox control linkage rear coupling.
One of the causes of too much play in the gear lever.
Accessed through the inspection flap under the rear bench seat (Beetle).

For:
- Beetle, 12/1947 ->12/1963 up to chassis no. ->5 911 560.
- Combi Split all versions, 1950 ->07/1967

Gearbox cable support for Volkswagen Polo 3 (6N) and Lupo
For VW Polo 3 (6N) from chassis No. 6N-V-000 001 upwardsFor VW Lupo all models with 5-speed manual gearbox
Original Volkswagen part

Gearbox selector rod or guide tube for Porsche 993 from 1993 to 1998 :
- 993 3.6 - 272hp (M64.05/06/07/08) Carrera from 1994 to 1995- 993 3.6 - 272hp (M64.05/07) Carrera 4 from 1995- 993 3.6 - 285hp (M64.21/22/23/24) Carrera and Carrera S from 1996 to 1998- 993 3.6 - 285hp (M64.21/23) Carrera 4 and Carrera 4S from 1996 to 1998- 993 3.8 - 300hp (M64.20) Carrera RS from 1995 to 1996
Element number 15 on the diagram

For Golf 2 & 3 with steering tie-rod shift linkage (Not G60, Rallye and all cable box control versions)

Socket located on the selector box in which the bearing pin is inserted,

For VW Polo (6N1) with cable box control from chassis 6N-V-000001:
- 1.0 50hp (AER, ALL)
- 1.1 45hp (AEV)
- 1.3 54hp (ADX)
- 1.4 54hp (ANX)
- 1.4 60hp (AEX, AKV, APQ)
- 1.4 101hp (AFH)
- 1.6 75hp (AEA, AEE, AHS)
- 1.6 GTi 120hp (AJV)
- 1.7 SDi 60hp (AKU)
- 1.9 SDi 64hp (AEF, AGD)

Only suited to all Golf 4 Saloon and Variant models that have linkage-controlled gearboxes (not suitable for Cabriolets or for cable-controlled gearboxes)

Suitable for models
with control linkages for 5-speed gearbox:
(not for cable-oriented gearboxes)
- Golf 2 and Jetta 2
- Golf 3 and Vento

Suitable up to ->04/99 for all:
- NewBeetle
- Golf 4 Saloon and Variant (Estate)

For Polo 6N1:
- All models from chassis no. 6N-V-000 001->

For Polo 6N2:
- All models except 1.4 TDi (AMF)

For Saloon:
- 1.8 70hp (AAM)
- 1.8 90hp (ACC, ADZ)
- 1.9 d 64hp (1Y, AEY)
- 1.9 td 75hp (AAZ)
- 2.0 107hp (AEP)
- 2.0 115hp (ADY, AGG, AKR)

For Variant:
- 1.8 75hp (AAM, ANN)
- 1.8 90hp (ABS, ADZ, ANP)
- 1.9 d 64hp (1Y, AEY)
- 1.9 Td 75hp (AAZ)
- 1.9 TDi 90hp (1Z, ALE, AHU)
- 1.9 TDi 110hp (AFN)
- 2.0 115hp (2E, ADY, AGG, AKR)

Front part of gearshift linkage, fork shaft under gearshift lever for VW Transporter T25 / T3 Syncro (4x4) from 10/1984 to 07/1992 :
Gasoline, Diesel engines

Short plastic front gear selection rod for 5-speed manual gearbox with linkages (not for cable-operated version).

For Golf 4 & Bora, 10/1997 ->06/2006:
with engines:
- 1400 16V 75hp (AHW, AKQ, APE, AXP, BCA)
- 1600 16V 105hp (ATN, AUS, AZD, BCB)
- 1600 8V 100hp (AEH, AKL, APF), 102hp (AVU, BFQ)
- 1900 SDi 68hp (AGP, AQM)

Complete repair kit for linkage reverse lever

For Golf 4 cabriolet, 99 ->03:
Models with 5-speed manual gearbox with linkages
- 1.6 100hp (AFT, AKS)
- 1.8 75hp (AAM, ANN), 90hp (ADZ, ANP)
- 2.0 115hp (AGG, AKR, ATU, AWG, AWF)

Front reverse lever for cable-operated gear control
Excess play can be harmful to gear selection.

For Golf 4 cabriolet, 99 ->03:
Models with 5-speed cable-operated manual gearbox
- 1.9 TDI 90hp (AHU, ALE), 110hp (AFN, AVG)

Complete replacement gear lever.
Excess play can be harmful to gear selection.

For Golf 4 cabriolet, 99 ->03:
Models with 5-speed manual gearbox with linkages
- 1.6 100hp (AFT, AKS)
- 1.8 75hp (AAM, ANN), 90hp (ADZ, ANP)
- 2.0 115hp (AGG, AKR, ATU, AWG, AWF)

Complete replacement gear lever .
Excess play can be harmful to gear selection.

For Golf 3 & Vento, 92 ->98:
models with 4- or 5-speed manual gearbox with linkages
- 1.4 petrol
- 1.6 petrol
- 1.8 petrol
- 1.9 Diesel & turbo-Diesel
- 2.0 petrol GTI 8S
(except: TDI, GTI 16S & VR6 with cable-operated system).