Front axle beams

Upper or lower tube bushing
on front axle with spindles and Puma.
External diameter: 45.5 mm
Internal diameter: 37 mm
Width: 24 mm
4 required, sold per unit.

For Beetle & Karmann-Ghia
all versions ->07/1965
Chassis no. ->115 999 000.

NYLON" nozzle for top or bottom tube 
on ball-joint front axle.
Outside diameter: 40 mm
Inner diameter: 37 mm
Width : 20 mm
Need 4, sold individually.
Easier to fit than conventional bronze bushes 

For VW Cox

Replacing the arm seals, bearings and

For Old Beetle & Karmann since 08/65->
(all models except 1302 & 1303)

It is necessary 2 per vehicle (1 per tube)
Think of blocks & long screws reference VJ51604

Original-length torsion bars for pivoting front axle. 1 pack for 1 top or bottom tube. Need 2 packs for a complete front axle.
Original VW Mexico reconditioned.

For VW Beetle

5 cm (2 inches) shorter torsion blades
for front axle with 2" reduced spindles (VJ51810)
Set to equip 2 tubes, upper and lower.

For Beetle & Karmann-Ghia Type 14 up to ->07/1965
all versions up to chassis No. ->115 999 000.

Bearing on the upper or lower tube of the front axle body. Original quality.

For VOLKSWAGEN Combi Split Brazil (1957-1975)

M10 x 1,50 45°

Upper or lower tube bushing
on front axle with ball joints.
External diameter: 40 mm
Interior diameter: 37 mm
Width: 20 mm
4 required, sold per unit.

For Beetle & Karmann-Ghia
from 08/1965->
from chassis no. 116 000 001->
all versions except 1302 & 1303.

1 adjuster screw to lower afront axle with spindles (Puma type)
Designed to modify 1 front axle tube, to be cut and welded to the desired height, fine adjustment usingmultiple notched teeth.
Note: 2 are required per car (1 per tube)
Remember the castor shims &long screws part reference VJ51604.

For Beetle & Karmann-Ghia Type 14 up to ->07/1965
all versions up to chassis no. ->115999 000.

Front axle side reinforcement parts with ball joints. Often attacked on the sides of the suspension arms, rebuild your original front axle with this set of plates.

For VW Beetle

1 adjuster screw to lower a front axle with ball joints (Puma type)
Designed to modify 1 front axle tube, to be cut and welded to the desired height, fine adjustmentusing multiple notched teeth.
Note: 2 are required per car (1 pertube)
Remember the castor shims & long screws part reference VJ51604.

For Beetle & Karmann-Ghia Type 14, from 08/1965->
all versions 1200, 1300, 1500 from chassis no. 116 000 001->
except 1302 & 1303.

Front axle with short "Puma" pivots + short torsion blades:- height-adjustable from 0 to -6 cm- shortened by 2 inches (5.08 cm)- not road-approvedShims and long screws required (VJ51604).
For VW Beetle and Karmann-Ghia type 14 up to 07/1965 all models up to chassis No. 115 999 000.

Original-length torsion bars for ball-jointed front axles. 1 pack to fit 1 top or bottom tube. Need 2 packs to equip a complete front axle.
Original VW Mexico reconditioned.

For VW Beetle

Original type front axle without fittings

For Beetle & Karmann-Ghia Type 14 up to ->07/1965
all versions up to chassis no. ->115 999 000

Kit of 4 sealing rings on the upper and lower tubes of the front axle body.

For VOLKSWAGEN Combi Split Brazil (1957-1975)

Pair of front axle rubber bumpers with pivots left and right between suspension arms.

For VOLKSWAGEN Combi Split Brazil (1957-1975)

Rubber front axle bumper with left or right pivots between suspension arms for VW Beetle & Karmann-Ghia up to 07/1965.
Sold individually

M10 x 1,50 90°

Jeu de 4 bagues en uréthane, remplacent les joints et les roulements extérieurs des bras de suspension sur le corps de train avant.

Pour VW Coccinelle jusque ->07/1965
Jusque châssis N°->115 999 000.