Inlet pipe

Intake manifold sleeve on flow meter for VW Bay Window from 08/1975 to 07/1979- 2.0 injection 70hp (ED, GD, GE)

VEMO plasticairintakemanifold for Audi A3 8P:
- 2.0L TDI 170hp from 03/2006 to 04/2008 (engine code BMN) -> from chassis number 8P-7-102 001- 2.0L TDI Quattro 170hp from 03/2006 to 04/2008 (engine code BMN) -> from chassis number 8P-7-102 001- 2.0L TDI 170hp from 03/2006 to 04/2008 (engine code BUY) -> from chassis number 8P-7-102 001- 2.0L TDI Quattro 170hp from 03/2006 to 04/2008 (engine code BUY) -> from chassis number 8P-7-102 001
Theintake manifold is sold complete with vacuum cap,gasket and fixing screws.

Connection O-ring for connecting the flow meter and air filter unit,

For Golf 5 saloon:
- 2.0 TDi 136hp (AZV)
- 2.0 TDi 140hp (BKD, BMM)
- 2.0 TDi 170hp (BMN)
- 2.0 GTi 200hp (CAWB, CCTA)

For Golf 5 Variant:
- 2.0 TDi 136hp (AZV, CBDA)
- 2.0 TDi 140hp (BKD, BMM, CBDB)
- 2.0 TFSi 200hp (CAWB, CCTA)

Connection O-ring for connecting the flow meter and air filter unit,

For Golf 5 saloon:
- 1.9 TDi 90hp (BRU, BXF, BXJ)
- 1.9 TDi 105hp (BKC, BLS, BXE)
- 2.0 SDi 75hp (BDK)
- 2.0 GTi 200hp (AXX, BPY, BWA)
- 2.0 GTi 230hp (BYD)

For Golf 5 Variant:
- 1.9 TDi 105hp (BLS, BXE)

O-ring of connection between flow meter and air filter box ,

For VW Golf 4 and Bora :
- 1.9 TDi 90hp (ALH) since 05/04->
- 1.9 TDi 100hp (ATD, AXR) since 2002->, from chassis 1J-2B088001->, 1J-2D420001->, 1J-2P055 001->, 1J-2U030 001-> or 1J-2W350 001->
- 1.9 TDi 110hp (AHF) since 05/04->

Intake manifold connector hose for Volkswagen Passat B5:

- 1.8L 20S 125hp from 08/1996 to 09/2000 (ADR engine code)
- 1.8L 20S 125hp Syncro/4Motion from 08/1996 to 09/2000 (ADR engine code)
- 1.8L 20S 125hp from 08/1997 to 09/2000 (APT engine code)
- 1.8L 20S 125hp Syncro/4Motion from 08/1997 to 09/2000 (APT engine code)

Need 4 per vehicle.

Original VW Classic Parts.

For Golf 4:
- 2.0 115hp (APK, AQY, AZH)

For New Beetle (1C, 9C):
- 2.0 115hp (AEG, APK, AQY)

Turbo hose on the air hose to the upper air cooler connector for Polo 4:
- 1.4 TDi 75hp (AMF)

Lower turbo hose on the air cooler for Polo 4:
- 1.4 TDi 75hp (AMF)

For Golf 4 and Bora:
- 1.6 100hp (AEH, AKL, APF)
- 1.6 102hp (AVU, BFQ)

Turbo airhose for Bmw 3 Series:
- Compatible with all Bmw 3 Series E46 Sedan, Touring, Compact, Coupé and Cabriolet versions from 06/2001 to 08/2006 only with 4-cylinder diesel engine code m47n2.
Warning! Not suitable for 2L Diesel engine engine code m47.
Upper boost hose only, connectingintercooler to EGR valve.

This carburettor bushing for 2cv (02/1970-07/1990) is made of high quality rubber.

This 2cv air intake manifold provides air flow between the carburettor and the airbox of 602cc engines with a dual body carburettor.

Turbo hose on the LH connector to the air cooler for Audi A3 (8P):
- 1.8 TFSi 160hp (AXX) from chassis No. 8P-6A140001-> or 8P-6B014001->
- 2.0 TFSi 200hp (BWA) from chassis No. 8P-6A140001-> or 8P-6B014001->

This POWER TUBE forced air intake kit for 602cc engines is high quality.
Compatible with all 2cvs and derivatives with twin body carburettors, the POWER pipe forced intake for 602cc engines is a stainless steel intake pipe kit.
It is installed between the fan air duct and the air filter.
The fan creates pressure that forces fresh air into the air filter and thus into the carburettor.
The additional air supply improves combustion and results in a power increase of up to 4hp!
Slightly larger jets than the original and a richness adjuster ensure optimal performance.

This POWER TUBE forced air intake kit for 2cvs with 602cc engines is high quality.
Compatible with all 2cvs and derivatives with twin body carburettors, the POWER pipe forced intake for 602cc engines is a stainless steel intake pipe kit.
It is installed between the fan air duct and the air filter.
The fan creates pressure that forces fresh air into the air filter and thus into the carburettor.
The additional air supply improves combustion and results in a power increase of up to 4hp!
Slightly larger jets than the original and a richness adjuster ensure optimal performance.

This POWER TUBE forced air intake kit for DYANEs and Acadianes with 602cc engines is high quality.
Compatible with all 2cvs and derivatives with twin body carburettors, the POWER pipe forced intake for 602cc engines is a stainless steel intake pipe kit.
It is installed between the fan air duct and the air filter.
The fan creates pressure that forces fresh air into the air filter and thus into the carburettor.
The additional air supply improves combustion and results in a power increase of up to 4hp!
Slightly larger jets than the original and a richness adjuster ensure optimal performance.

This POWER TUBE forced air intake kit for Meharis is high quality.
Compatible with all 2cvs and derivatives with twin body carburettors, the POWER pipe forced intake for 602cc engines is a stainless steel intake pipe kit.
It is installed between the fan air duct and the air filter.
The fan creates pressure that forces fresh air into the air filter and thus into the carburettor.
The additional air supply improves combustion and results in a power increase of up to 4hp!
Slightly larger jets than the original and a richness adjuster ensure optimal performance.

This POWER TUBE forced air intake kit for AMI6 and AMI8 cars is high quality.
Compatible with all 2cvs and derivatives with twin body carburettors, the POWER pipe forced intake for 602cc engines is a stainless steel intake pipe kit.
It is installed between the fan air duct and the air filter.
The fan creates pressure that forces fresh air into the air filter and thus into the carburettor.
The additional air supply improves combustion and results in a power increase of up to 4hp!
Slightly larger jets than the original and a richness adjuster ensure optimal performance.

Fixing tube for hot air intake duct on air filter for Type 1 engines.
This tube is used to conduct preheated air from the engine to the air filter, and is fitted under the crescent plate to the right of the crankshaft pulley.

For VW Type 1 engines fitted with original air filter (with 50mm heater hose) and corresponding crescent plate.


For VW Cox, Combi, Karmann-Ghia

ELRING intake housing gasket for BMW 8 Series E31
For BMW 8 Series E31 with engine code M60 :- 840i 286hp (M60B40)- 840Ci 286hp (M60B40)
Original ELRING quality