Anti-sounds for brake pads

Rear brake pad retainer springs for Volkswagen Golf 3 and Corrado with ABS and TRW mounting in 226x10 discs 4x100 centers:

Golf 3 :
- 2.0L GTI 8S and 16S
- 2.8L VR6 174hp (engine code AAA)

Corrado :
- 2.9L VR6 190hp from 1991 to 1995 (engine code ABV)

ATTENTION: Not suitable for VR6 Syncro!

Complete kit for 2 rear calipers including 4 springs (2 per caliper support).

When replacing the brake pads on your vehicle, it is strongly recommended to replace their mounting springs, as these no longer fulfil their elastic and vibration-damping role over time, leading to noises and whistling under braking.

Front brake pad retaining springs for Volkswagen Golf 3 and Vento.

Complete kit for 2 front calipers including 4 springs:
- 2 springs for left side( upper andlower )
- 2 springs for right side (top and bottom)

When replacing the brake pads on your Golf 3, we strongly recommend that you replace their mounting springs, as these no longer fulfil their elastic and vibration-damping role over time, leading to noises and hissing n oises when braking.

Original part numbers: 191615269A and 191615270A

Front brake pad mounting springs for Volkswagen Golf 6 Sedan and Variant:

- All petrol and diesel models from 10/2008 with ATE mounting (brake codes 1ZE, 1ZP, 1LJ, 1ZD, 1LL, 1LV, 1ZA and 1ZB) -> up to chassis number WVWZZZ1KZ9-200000 and from chassis number WVWZZZ1KZ9-400001

INFORMATION: There are several spring models to choose from, depending on the year and the brake code (PR code) recorded in the vehicle service booklet. We recommend that you check your assembly before ordering.

Thisaccessory kit for thefront axle includes 2 retaining springs (1 per caliper).

brake caliper spring for Citroën ID.
This pin spring holds the brake pads in place in the caliper.
This pin is suitable for all Citroën ID models.

Front brake pad mounting springs for Audi TT 8J:

- All models from 04/2006 to 04/2010 with TEVES mounting and 340x30mm 5x112 front brake discs (brake codes 1LK and 1LM)

ATTENTION: Not suitable for Audi TTS and TT RS with brake code 1LN!

Thisaccessory kit for thefront axle includes 2 retaining springs (1 per caliper).

Rear brake pad damper plate (anti-noise), diameter 28 mm, for Porsche Cayman 987 :

- 987 2.7 Cayman fase 1 - 245 hp (M97.20) from 2007 to 2008
- 987 3.4 Cayman S fase 1 - 295 hp (M97.21) from 2006 to 2008
- 987 3.4 Cayman S Sport - 303 hp (M97.22) of 2008
- 987 2.9 Cayman fase 2 - 265 hp (MA1.20) from 2009 to 2012
- 987 3.4 Cayman S fase 2 - 320 hp (MA1.21) from 2009 to 2012
- 987 3.4 Cayman R - 330 hp (MA1.21) cv from 2011 to 2012

Mounts on the pistons of the bottom of the caliper

In principle, 4 pellets (2 of 30 mm and 2 of 28 mm) are present by rear caliper (1 pellet per piston).
Before ordering, it is advisable to check on your vehicle, the diameters which are necessary for you according to your options.

Quantity required per vehicle : 4

Sold individually

Front brake pad damping plate for Porsche 911 type 993 :

- 993 3.6 - 285 hp Carrera 4S from 1996 to 1998
- 993 3.8 - 300 hp Carrera RS from 1995 to 1996
- 993 3.6 - 408 hp Turbo from 1995 to 1998
- 993 3.6 - 450 hp Turbo S from 1997 to 1998

Diameter : 44 mm
Fitted on the calliper's lower pistons

Number required per vehicle : 4

Sold per unit

Front brake pad damper plate (anti-noise) for Porsche 911 type 996 4S, Turbo, GT2 and GT3 :

- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 3.6 Turbo - 420 hp (M96.70) from 2000 to 2005
- 996 3.6 Turbo X50 - 450 hp (M96.70) from 2001 to 2005
- 996 3.6 Turbo S - 450 hp (M96.70) of 2005
- 996 3.6 GT2 - 462 hp (M96.70SL) from 2001 to 2004
- 996 3.6 GT2 - 483 hp (M96.70SL) of 2005
- 996 phase 1 3.6 GT3 - 360 hp (M96.76) from 2000 to 2001
- 996 phase 2 3.6 GT3 - 380 hp (M96.79) from 2004 to 2005
- 996 phase 2 3.6 GT3 RS - 380 hp (M96.79) of 2004

Not suitable for ceramic brake discs

Quantity required per vehicle : 4

Sold individually

Front brake pad damping plate for Porsche 911 type 993 :

- 993 3.6 - 272 hp Carrera and Carrera 4 from 1994 to 1995
- 993 3.6 - 285 hp Carrera and Carrera 4 from 1996 to 1998
- 993 3.6 - 285 hp Carrera S from 1997 to 1998
- 993 3.6 - 285 hp Carrera 4S from 1996 to 1998
- 993 3.8 - 300 hp Carrera RS from 1995 to 1996 -> front + rear
- 993 3.6 - 408 hp Turbo from 1995 to 1998
- 993 3.6 - 450 hp Turbo S from 1997 to 1998

Diameter : 36 mm
Fitted on the calliper's lower pistons

Number required per vehicle : 4
Quantity required for the 993 Carrera RS : 8 (front + rear)

Sold per unit

Rear brake pad damping plate for Porsche 968 :

- 968 3.0 from 1992 to 1995
- 968 3.0 Club Sport from 1993 to 1995

Diameter : 28 mm
Fitted on the calliper's lower pistons

Number required per vehicle : 4

Sold per unit

Front brake pad damper plate(anti-noise) for Porsche 911 type 997 :

- 997 phase 1 3.8 - 355 hp (M97.01) Carrera S and Carrera 4S from 2005 to 2008
- 997 phase 1 3.8 X51 - 380 hp (M97.01S) Carrera S and Carrera 4S from 2007 to 2008
- 997 phase 2 3.8 - 385 hp (MA 101) Carrera S and Carrera 4S from 2009 to 2012
- 997 phase 2 3.8 X51 - 408 hp (MA 101) Carrera S and Carrera 4S from 2009 to 2012

- 997 3.8 - 408 cv (MA 101) Carrera GTS from 2011 to 2012
- 997 3.8 - 408 cv (MA 101) Carrera 4 GTS of 2012

Not suitable for ceramic brake discs

Quantity required per vehicle : 4

Sold individually

Rear brake pad mounting springs for Seat Ibiza 6L:

- All petrol and diesel models with LUCAS/TRW mounting on 232x9mm solid brake discs (brake code 1KK and 1KT).

Thisaccessory kit for therear axle includes 4 retaining springs (2 per caliper).

Rear brake pad damping plate for Porsche 928 :

- 928 S4 5.0 - 320 hp from 1989 to 1991
- 928 GT 5.0 - 330 hp from 1989 to 1991
- 928 GTS 5.4 - 350 hp from 1992 to 1995

Diameter : 28 mm
Fitted on the calliper's upper pistons

Number required per vehicle : 4

Sold per unit

Rear brake pad mounting springs for Volkswagen Golf 4 Sedan and Variant:

- All petrol or diesel models, 2-wheel drive or 4Motion, from 10/1997 to 06/2006 with LUCAS/TRW assembly (brake codes 1KK, 1KS, 1KV, 1KP, 1KT, 1KX and 1KE)

Thisaccessory kit for therear axle includes 4 retaining springs (2 per caliper).

Front brake pad damping plate for Porsche 911 type 964 :

- 964 3.6 Carrera 2 and Carrera 4 from 1989 to 1994
- 964 3.6 Carrera 4 Turbo-Look Factory from 1991 to 1994

Diameter : 40 mm
Fitted on the calliper's upper pistons

Number required per vehicle : 4

Sold per unit

Front brake pad retaining springs for Volkswagen Golf 2 and Jetta 2.

Complete kit for 2 front calipers including 4 springs:
- 2 springs for left side( upper andlower )
- 2 springs for right side (top and bottom)

When replacing the brake pads on your Golf 2, we strongly recommend that you replace their mounting springs, as these no longer fulfil their elastic and vibration-damping role over time, leading to noises and hissing n oises when braking.

Original part numbers: 191615269A and 191615270A

Front brake pad mounting springs for Volkswagen Golf 5 Sedan and Variant:

- All petrol and diesel models from 01/2004 with ATE mounting (brake codes 1ZE, 1ZP, 1LJ, 1ZD, 1LL and 1LV) -> from chassis numbers WVWZZZ1KZ4-000001, WVWZZZ1KZ5-000001 and WVWZZZ1KZ6-000001

INFORMATION: There are several spring models available, depending on the year and the brake code (PR code) recorded in the vehicle's service history. We recommend that you check your assembly before ordering.

Thisaccessory kit for thefront axle includes 2 retaining springs (1 per caliper).

Front brake pad mounting springs for Audi A3 8P Sedan and Sportback:

- All petrol and diesel models from 03/2003 to 10/2012 with ATE mounting (brake codes 1LK and 1ZK)

Thisaccessory kit for thefront axle includes 2 retaining springs (1 per caliper).

Rear brake pad damping plate for Porsche 944 S2 and Turbo :

- 944 3.0 S2 - 211 hp from 1989 to 1991
- 944 2.5 Turbo 250 hp from 1989 to 1991

Diameter : 28 mm
Fitted on the calliper's lower pistons

Number required per vehicle : 4

Sold per unit

Front brake pad damping plate for Porsche 968 :

- 968 3.0 from 1992 to 1995
- 968 3.0 Club Sport from 1993 to 1995

Diameter : 40 mm
Fitted on the calliper's upper pistons

Number required per vehicle : 4

Sold per unit