Cylinder head bolt

For A3 (8P):
- 1.9 TDi 105 hp (BKC)
- 2.0 TDi 140 hp (BMM)

For Golf 4:
- 1.9 TDi 100hp (ATD, AXR)
- 1.9 TDi 115hp (AJM, AUY)
- 1.9 TDi 130hp (ASZ)

For Passat 4 (3B3, 3B5):
- 1.9 TDi 115hp (AJM, ATJ)

For Passat 5 (3B3, 3B6):
- 1.9 TDi 100hp (AVB)
- 1.9 TDi 130hp (AVF, AWX)
- 2.0 TDi 136hp (BGW, BHW)

1 cylinder head screw for TDi engines, 8 screws needed for 1.4 3-cylinder engines or 10 screws for 1.9 4-cylinder engines

For Polo 9N1:
- 1.4 TDi 75hp (AMF, BAY)
- 1.9 TDi 100/101hp (ATD, AXR)
- 1.9 TDi 130hp (ASZ, BLT)

For Polo 9N3:
- 1.4 TDi 68/70/80hp (BNM, BWB, BMS, BNV)
- 1.9 TDi 100/101hp (ATD, BMT, AXR)
- 1.9 TDi 130hp (ASZ, BLT)

For Golf 5:
- 1.9 TDi 90hp (BRU, BXF)
- 1.9 TDi 105hp (BKC, BLS, BXE)
- 2.0 SDi 75hp (BDK)
- 2.0 TDi 140hp (BMM)

For Golf 5:
- 2.0 TDi 136hp (AZV)
- 2.0 TDi 140hp (BKD)
- 2.0 TDi 170hp (BMN)

For Golf 3 and Vento:
- 1.4 60hp (AEX, APQ)
- 1.6 75hp (ABU, AEA, AEE)

For Passat 4 (3B2, 3B5):
- 1.6 100hp (AHL, ANA, ARM)

For Polo Classic 6V2:
- 1.6 100hp (AEH, AKL, APF, AUR)

For Polo 9N3:
- 2.0 116hp (BBX)

For New Beetle (1C, 9C):
- 1.6 100hp and 102hp(AWH, AYD, BFS)
- 2.0 115hp (AEG, APK, AQY, AVH, AZG, AZJ, BEJ, BER,BEV, BHP, CBPA)

For New Beetle Cabriolet (1Y):
- 1.6 102hp (BFS)
- 2.0 115hp (AZJ, BDC, BEV, BGD)

Screw M 11 x 1,5 mm
Length : 142 mm

For :
VW Golf 3, Vento, Corrado, Passat :
- 2.0 GTI 16S 150cv (ABF)
- 2.0 16S 136cv (9A since n° 131 264->)

Complete set of 14 cylinder head bolts Mercedes W124, SL R107 and R129, 6-cylinder petrol engine code M103

Thread: M12
Length: 102mm
Screw pitch: 1.75mm

ATTENTION: Support washers not supplied!

We recommend that you replace the cylinder head bolts on your engine block after opening it for maintenance and/or repair (e.g. replacing the cylinder head gasket). These screws require a specific tightening procedure and cannot be reused on reassembly.

Assignments:
W124:
-Mercedes 260 E 124.026 from 09/1985 to 08/1989 6 cylinders 2.6L 160hp (M 103.940)
-Mercedes 260 E 124.026 from 09/1989 to 10/1992 6 cylinders 2.6L 160hp (M 103.940)
-Mercedes 260 E 4-Matic 124.226 from 04/1987 to 08/1989 6 cylinders 2.6L 160hp (M 103.943)
-Mercedes 260 E 4-Matic 124.226 from 09/1989 to 06/1991 6 cylinders 2.6L 160hp (M 103.943)
-Mercedes 260 E Longue 124.027 from 05/1990 to 09/1992 6 cylinders 2.6L 160hp (M 103.943)
-Mercedes 300 E 124.030 from 04/1985 to 08/1989 6 cylinders 3.0L 180hp (M 103.983)
-Mercedes 300 E 124.030 from 09/1989 to 11/1992 6 cylinders 3.0L 180hp (M 103.983)
-Mercedes 300 E 4-Matic 124.230 from 07/1987 to 08/1989 6 cylinders 3.0L 180hp (M 103.985)
-Mercedes 300 E 4-Matic 124.230 from 09/1989 to 07/1993 6 cylinders 3.0L 180hp (M 103.985)
-Mercedes E 300 4-Matic 124.230 from 07/1993 to 04/1995 6 cylinders 3.0L 180hp (M 103.985)
-Mercedes 300 TE 124.090 from 11/1985 to 08/1989 6 cylinders 3.0L 180hp (M 103.983)
-Mercedes 300 TE 124.090 from 09/1989 to 10/1992 6 cylinders 3.0L 180hp (M 103.983)
-Mercedes 300 TE 4-Matic 124.290 from 04/1987 to 08/1989 6 cylinders 3.0L 180hp (M 103.985)
-Mercedes 300 TE 4-Matic 124.290 from 09/1989 to 07/1993 6 cylinders 3.0L 180hp (M 103.985)
-Mercedes E 300 Break 4-Matic 124.290 from 07/1993 to 04/1995 6 cylinders 3.0L 180hp (M 103.985)
-Mercedes 300 CE 124.050 from 07/1987 to 08/1989 6 cylinders 3.0L 180hp (M 103.983)
-Mercedes 300 CE 124.050 from 09/1989 to 10/1992 6 cylinders 3.0L 180hp (M 103.983)

SL R107 :
- Mercedes 300 SL 107.041 from 05/1985 to 08/1989 6 cylinders 3.0L 190hp (M 103.982)

SL R129:
Mercedes 300 SL 129.060 from 03/1989 to 07/1993 6 cylinders 3.0L 190hp (M 103.984)

12 Cylinder head bolts for Porsche Boxster 986 from 1997 to 2004 :
- 986 2.5 Boxster - 204 hp (M96.20) from 1997 to 1999- 986 2.7 Boxster - 220 hp (M96.22) from 2000 to 2002- 986 2.7 Boxster - 228 hp (M96.23) from 2003 to 2004- 986 3.2 Boxster S - 252 hp (M96.21) from 2000 to 2002- 986 3.2 Boxster S - 260 hp (M96.24) from 2003 to 2004 - 986 3.2 Boxster S550 - 266 hp (M96.24) from 2003 to 2004
Dimensions: M10 x 230 mm
Quantity per vehicle: 24
Sold by 12 = for 1 cylinder head

For Polo 6N1:
- 1.3 54hp (ADX)
- 1.4 54hp (ANX)
- 1.4 60hp (AEX, AKV, APQ)
-1.6 75hp (AEA, AEE, AHS)

For Polo Classic (6V2):
- 1.4 54hp (ANX)
- 1.4 60hp (AEX, AKV, APQ)
- 1.6 75hp (AEE, ALM)

Complete set of 14 cylinder head screws for Bmw 7 Series:

- Compatible with all Bmw 7 Series E23 carburettor or injection versions from 10/1976 to 06/1986 including 745i engine code m30.

We recommend that you replace the cylinder head bolts on your engine block after opening it for maintenance and/or repair (e.g. replacing the cylinder head gasket). These screws require a specific tightening procedure and cannot be reused on reassembly.

Set of 14 cylinder head screws for Bmw 6 Series:

- Compatible with all Bmw 6 Series E24 versions from 10/1975 to 04/1989 engine code m30.

ATTENTION: Support washers not supplied!

We recommend that you replace the cylinder head bolts on your engine block after opening it for maintenance and/or repair (e.g. cylinder head gasket replacement). These screws require a specific tightening procedure and cannot be reused on reassembly.

Set of 10 cylinder head screws for Renault Supercinq

For Renault Super5 :
- Supercinq C, TC from 06/1985 to 06/1987 - Cléon-Fonte 956cm3 42hp (C1C-700)
- Supercinq L, TL, GL, GTL from 09/1984 to 05/1985 - Cléon-Fonte 1108cm3 47hp (C1E-750)
- Supercinq GTL from 09/1984 to 06/1987 - Cléon-Fonte 1397cm3 60hp (C1J-768)
- Supercinq Automatic from 06/1985 to 06/1987 - Cléon-Fonte 1397cm3 68hp (C2J-781)
- Supercinq GTS, TS, TSE from 06/1985 to 06/1987 - Cléon-Fonte 1397cm3 72hp (C2J-780)
- Supercinq GT Turbo from 03/1985 to 06/1987 - Cléon-Fonte 1397cm3 115hp (C1J-782)
- Supercinq Five, SL, TL from 07/1987 to 06/1992 - Cléon-Fonte 1108cm3 47hp (C1E-400)
- Supercinq SR, TR, GTR from 07/1987 to 06/1990 - Cléon-Fonte 1237cm3 55hp (C1G-720)
- Supercinq Five, Saga, Bye Bye from 07/1992 to 12/1996 - Cléon-Fonte 1390cm3 60hp (C3J-760)
- Supercinq GTS from 07/1987 to 06/1990 - Cléon-Fonte 1397cm3 68hp (C2J-700)
- Supercinq Automatic, Baccara Automatic from 07/1987 to 12/1991 - Cléon-Fonte 1397cm3 68hp (C2J-781)
- Supercinq GT Turbo from 07/1987 to 12/1991 - Cléon-Fonte 1397cm3 120hp (C1J-788)

Contains 10 screws and washers
Original quality

Set of 10 cylinder head screws for BMW 5 Series E34 and E39 with V8 petrol engine:

E34 Saloon:
- 530i V8 218hp phase 1 from 08/1992 to 03/1994 (engine code M60B30)
- 530i V8 218hp phase 2 from 04/1994 to 12/1995 (engine code M60B30)
- 540i V8 286hp phase 1 from 03/1992 to 03/1994 (engine code M60B40)
- 540i V8 286hp phase 2 from 04/1994 to 12/1995 (engine code M60B40)

E39 Touring:
- 530i V8 218hp phase 1 from 05/1992 to 03/1994 (engine code M60B30)
- 530i V8 218hp phase 2 from 04/1994 to 06/1996 (engine code M60B30)
- 540i V8 286hp phase 1 from 05/1993 to 03/1994 (engine code M60B40)
- 540i V8 286hp phase 2 from 04/1994 to 06/1996 (engine code M60B40)

###

E39 Saloon:
- 535i V8 235hp phase 1 from 10/1995 to 07/1998 (engine code M62B35)
- 535i V8 245hp phase 1 from 08/1998 to 08/2000 (engine code M62B35TU)
- 535i V8 245hp phase 2 from 09/2000 to 06/2003 (engine code M62B35TU)
- 540i V8 286hp phase 1 from 04/1995 to 07/1998 (engine code M62B44)
- 540i V8 286hp phase 1 from 08/1998 to 08/2000 (engine code M62B44TU)
- 540i V8 286hp phase 2 from 09/2000 to 06/2003 (engine code M62B44TU)
- 540iP V8 286hp phase 1 from 10/1996 to 07/1998 (engine code M62B44)
- 540iP V8 286hp phase 1 from 08/1998 to 08/2000 (engine code M62B44TU)
- 540iP V8 286hp phase 2 from 09/2000 to 05/2003 (engine code M62B44TU)
- M5 5.0 V8 400hp from 10/1997 to 08/2000 (engine code S62B50)
- M5 5.0 V8 400hp from 09/2000 to 06/2003 (engine code S62B50)

E39 Touring:
- 540i V8 286hp phase 1 from 09/1996 to 07/1998 (engine code M62B44)
- 540i V8 286hp phase 1 from 08/1998 to 08/2000 (engine code M62B44TU)
- 540i V8 286hp phase 2 from 09/2000 to 12/2003 (engine code M62B44TU)

CAUTION: Support washers not supplied!

We recommend that you replace the cylinder head bolts of your engine block after opening for maintenance and / or repair (cylinder head gasket replacement type ..). Indeed, these screws require a specific tightening procedure and cannot be reused during reassembly.

Set of 10 cylinder head screws for Renault 5

For Renault 5 :
- Renault 5 TL (R1222/R1392) from 01/1972 to 12/1984 - Cléon Fonte 956cm3 46hp (689-710)
- Renault 5 TL (R1227/R1397) from 07/1979 to 12/1984 - Cléon Fonte 1108cm3 45hp (688-713)
- Renault 5 GTL (R1226/R1395) from 07/1979 to 12/1984 - Cléon Fonte 1108cm3 45hp (688-713)
- Renault 5 TX (R1229/R1399) from 09/1981 to 12/1984 - Cléon Fonte 1397cm3 63hp (C2J-713)
- Renault 5 1400 Automatic (R1229/R1399) from 02/1981 to 12/1984 - Cléon Fonte 1397cm3 63hp (847-712)
- Renault 5 TX Automatic (R1229/R1399) from 02/1981 to 12/1984 - Cléon Fonte 1397cm3 63hp (847-712)

Contains 10 screws and washers
Original quality

Set of 10 cylinder head screws for BMW 7 Series E32:

Bmw 7 Series E32 :

- 730i 8cyl 218hp from 05/1991 to 04/1994 (engine code m60b30)
- 730iL 8cyl 218hp from 06/1992 to 03/1994 (engine code m60b30)
- 740i 8cyl 286hp from 09/1991 to 03/1994 (engine code m60b40)
- 740iL 8cyl 286hp from 10/1991 to 03/1994 (engine code m60b40)

ATTENTION: Support washers not supplied!

You will need to order 2 sets of 10 screws for the entire motor (i.e. 2 quantities to add to your basket).

We recommend that you replace the cylinder head bolts on your engine block after opening it for maintenance and/or repair (e.g. replacing the cylinder head gasket). These screws require a specific tightening procedure and cannot be reused on reassembly.

Complete set of 14 cylinder head screws for BMW 7 Series E38 :

Bmw 7 Series E38 :

- 728i 6cyl 193hp from 10/1995 to 09/1998 (engine code m52b28)
- 728iL 6cyl 193hp from 10/1995 to 09/1998 (engine code m52b28)

Compatible only with grey cast-iron engine.

Not suitable for Bmw 7 Series E38 728i engine code m52b28tu.

Support washers not supplied!

We recommend that you replace the cylinder head bolts on your engine block after opening it for maintenance and/or repair (e.g. replacing the cylinder head gasket). These screws require a specific tightening procedure and cannot be reused on reassembly.