Cylinder head bolt

Complete set of 14 cylinder head bolts Mercedes W124, SL R107 and R129, 6-cylinder petrol engine code M103

Thread: M12
Length: 102mm
Screw pitch: 1.75mm

ATTENTION: Support washers not supplied!

We recommend that you replace the cylinder head bolts on your engine block after opening it for maintenance and/or repair (e.g. replacing the cylinder head gasket). These screws require a specific tightening procedure and cannot be reused on reassembly.

Assignments:
W124:
-Mercedes 260 E 124.026 from 09/1985 to 08/1989 6 cylinders 2.6L 160hp (M 103.940)
-Mercedes 260 E 124.026 from 09/1989 to 10/1992 6 cylinders 2.6L 160hp (M 103.940)
-Mercedes 260 E 4-Matic 124.226 from 04/1987 to 08/1989 6 cylinders 2.6L 160hp (M 103.943)
-Mercedes 260 E 4-Matic 124.226 from 09/1989 to 06/1991 6 cylinders 2.6L 160hp (M 103.943)
-Mercedes 260 E Longue 124.027 from 05/1990 to 09/1992 6 cylinders 2.6L 160hp (M 103.943)
-Mercedes 300 E 124.030 from 04/1985 to 08/1989 6 cylinders 3.0L 180hp (M 103.983)
-Mercedes 300 E 124.030 from 09/1989 to 11/1992 6 cylinders 3.0L 180hp (M 103.983)
-Mercedes 300 E 4-Matic 124.230 from 07/1987 to 08/1989 6 cylinders 3.0L 180hp (M 103.985)
-Mercedes 300 E 4-Matic 124.230 from 09/1989 to 07/1993 6 cylinders 3.0L 180hp (M 103.985)
-Mercedes E 300 4-Matic 124.230 from 07/1993 to 04/1995 6 cylinders 3.0L 180hp (M 103.985)
-Mercedes 300 TE 124.090 from 11/1985 to 08/1989 6 cylinders 3.0L 180hp (M 103.983)
-Mercedes 300 TE 124.090 from 09/1989 to 10/1992 6 cylinders 3.0L 180hp (M 103.983)
-Mercedes 300 TE 4-Matic 124.290 from 04/1987 to 08/1989 6 cylinders 3.0L 180hp (M 103.985)
-Mercedes 300 TE 4-Matic 124.290 from 09/1989 to 07/1993 6 cylinders 3.0L 180hp (M 103.985)
-Mercedes E 300 Break 4-Matic 124.290 from 07/1993 to 04/1995 6 cylinders 3.0L 180hp (M 103.985)
-Mercedes 300 CE 124.050 from 07/1987 to 08/1989 6 cylinders 3.0L 180hp (M 103.983)
-Mercedes 300 CE 124.050 from 09/1989 to 10/1992 6 cylinders 3.0L 180hp (M 103.983)

SL R107 :
- Mercedes 300 SL 107.041 from 05/1985 to 08/1989 6 cylinders 3.0L 190hp (M 103.982)

SL R129:
Mercedes 300 SL 129.060 from 03/1989 to 07/1993 6 cylinders 3.0L 190hp (M 103.984)

Set of 14 cylinder head screws for Bmw E3: - Compatible with all Bmw E3 versions from 12/1968 to 02/1977 including 3.0 if engine code m30.
ATTENTION: Support washers not supplied!

We recommend that you replace the cylinder head bolts on your engine block after opening it for maintenance and/or repair (e.g. replacing the cylinder head gasket). These screws require a specific tightening procedure and cannot be reused on reassembly.

Complete set of 14 cylinder head bolts for BMW X5 E53 with 6-cylinder diesel engine:

- 3.0d 6cyl 184cv phase 1 from 01/2000 to 09/2003 (engine code M57D30)
- 3.0d 6cyl 218cv phase 2 from 10/2003 to 09/2006 (engine code M57D30TU)

CAUTION: Support washers not supplied!

We recommend that you replace the cylinder head bolts of your engine block after opening for maintenance and / or repair (cylinder head gasket replacement type ..). Indeed, these screws require a specific tightening procedure and cannot be reused during reassembly.

For Golf 4:
- 1.6 100hp (AEH, AKL, APF)
- 1.6 102hp (AVU)
- 1.8 125hp (AGN -> 107 000)
- 1.8 20v turbo 150hp (AGU -> 048 000)
- 2.0 115hp (AQY, APK, AZH, AZG, AZJ, BEH)

For Golf 6:
- 1.6 102hp (BSE, BSF, CCSA, CHGA, CMXA)

For Polo 9N1:
- 1.2 64hp (AZQ, BME)
- 1.4 75hp and 85hp (AUA, BBY, BKY, AXU)
- 1.4 100hp (AUB, BBZ)

For Polo 9N3:
- 1.4 75hp and 80hp (BKY, BUD)
- 1.4 85hp and 100hp (AXU, BBZ)
- 1.6 105hp (BTS)

Set of 14 cylinder head screws for Bmw 6 Series:

- Compatible with all Bmw 6 Series E24 versions from 10/1975 to 04/1989 engine code m30.

ATTENTION: Support washers not supplied!

We recommend that you replace the cylinder head bolts on your engine block after opening it for maintenance and/or repair (e.g. cylinder head gasket replacement). These screws require a specific tightening procedure and cannot be reused on reassembly.

Complete set of 14 cylinder head bolts for BMW X5 E53 with 6-cylinder petrol engine:

- 3.0i 6cyl 231cv phase 1 from 08/1999 to 09/2006 (engine code M54B30)

CAUTION: Support washers not supplied!

We recommend that you replace the cylinder head bolts of your engine block after opening for maintenance and / or repair (cylinder head gasket replacement type ..). Indeed, these screws require a specific tightening procedure and cannot be reused during reassembly.

For A4 (B5):
- 1.6 100 hp (AHL,ARM, ANA)
- 1.6 102 hp (ALZ)

Set of 10 cylinder head screws for BMW 7 Series E32:

Bmw 7 Series E32 :

- 730i 8cyl 218hp from 05/1991 to 04/1994 (engine code m60b30)
- 730iL 8cyl 218hp from 06/1992 to 03/1994 (engine code m60b30)
- 740i 8cyl 286hp from 09/1991 to 03/1994 (engine code m60b40)
- 740iL 8cyl 286hp from 10/1991 to 03/1994 (engine code m60b40)

ATTENTION: Support washers not supplied!

You will need to order 2 sets of 10 screws for the entire motor (i.e. 2 quantities to add to your basket).

We recommend that you replace the cylinder head bolts on your engine block after opening it for maintenance and/or repair (e.g. replacing the cylinder head gasket). These screws require a specific tightening procedure and cannot be reused on reassembly.

For Polo 6N1:
- 1.0 50hp (AER, ALL)

For Polo 6N2:
- 1.4 75hp and 100hp (AFK, AHW, APE, AQQ, AUA, AUB)

For Polo Classic 6V2:
- 1.4 75hp (APE, AUA)
- 1.6 75hp (ALM)

Set of 10 cylinder head screws for BMW 5 Series E34 and E39 with V8 petrol engine:

E34 Saloon:
- 530i V8 218hp phase 1 from 08/1992 to 03/1994 (engine code M60B30)
- 530i V8 218hp phase 2 from 04/1994 to 12/1995 (engine code M60B30)
- 540i V8 286hp phase 1 from 03/1992 to 03/1994 (engine code M60B40)
- 540i V8 286hp phase 2 from 04/1994 to 12/1995 (engine code M60B40)

E39 Touring:
- 530i V8 218hp phase 1 from 05/1992 to 03/1994 (engine code M60B30)
- 530i V8 218hp phase 2 from 04/1994 to 06/1996 (engine code M60B30)
- 540i V8 286hp phase 1 from 05/1993 to 03/1994 (engine code M60B40)
- 540i V8 286hp phase 2 from 04/1994 to 06/1996 (engine code M60B40)

###

E39 Saloon:
- 535i V8 235hp phase 1 from 10/1995 to 07/1998 (engine code M62B35)
- 535i V8 245hp phase 1 from 08/1998 to 08/2000 (engine code M62B35TU)
- 535i V8 245hp phase 2 from 09/2000 to 06/2003 (engine code M62B35TU)
- 540i V8 286hp phase 1 from 04/1995 to 07/1998 (engine code M62B44)
- 540i V8 286hp phase 1 from 08/1998 to 08/2000 (engine code M62B44TU)
- 540i V8 286hp phase 2 from 09/2000 to 06/2003 (engine code M62B44TU)
- 540iP V8 286hp phase 1 from 10/1996 to 07/1998 (engine code M62B44)
- 540iP V8 286hp phase 1 from 08/1998 to 08/2000 (engine code M62B44TU)
- 540iP V8 286hp phase 2 from 09/2000 to 05/2003 (engine code M62B44TU)
- M5 5.0 V8 400hp from 10/1997 to 08/2000 (engine code S62B50)
- M5 5.0 V8 400hp from 09/2000 to 06/2003 (engine code S62B50)

E39 Touring:
- 540i V8 286hp phase 1 from 09/1996 to 07/1998 (engine code M62B44)
- 540i V8 286hp phase 1 from 08/1998 to 08/2000 (engine code M62B44TU)
- 540i V8 286hp phase 2 from 09/2000 to 12/2003 (engine code M62B44TU)

CAUTION: Support washers not supplied!

We recommend that you replace the cylinder head bolts of your engine block after opening for maintenance and / or repair (cylinder head gasket replacement type ..). Indeed, these screws require a specific tightening procedure and cannot be reused during reassembly.

For New Beetle (1C, 9C):
- 1.6 100hp and 102hp(AWH, AYD, BFS)
- 2.0 115hp (AEG, APK, AQY, AVH, AZG, AZJ, BEJ, BER,BEV, BHP, CBPA)

For New Beetle Cabriolet (1Y):
- 1.6 102hp (BFS)
- 2.0 115hp (AZJ, BDC, BEV, BGD)

Complete set of 14 cylinder head bolts for BMW Z3 E36 with 6-cylinder petrol engine:

Roadster:
- 2.0 150hp phase 2 from 07/1998 to 10/2000 (engine code M52B20TU)
- 2.2i 170hp phase 2 from 12/1999 to 06/2002 (engine code M54B22)
- 2.8 192hp phase 1 from 07/1996 to 08/1998 (engine code M52B28)
- 2.8 192hp phase 1 from 09/1998 to 03/1999 (engine code M52B28TU)
- 2.8 193hp phase 2 from 04/1999 to 05/2000 (engine code M52B28TU)
- 3.0i 231hp phase 2 from 09/1999 to 06/2002 (engine code M54B30)

Chopped off :
- 2.8 192hp phase 1 from 05/1997 to 08/1998 (engine code M52B28)
- 2.8 193hp phase 1 from 09/1998 to 03/1999 (engine code M52B28TU)
- 2.8 193hp phase 2 from 04/1999 to 05/2000 (engine code M52B28TU)
- 3.0i 231cv from 09/1999 to 06/2002 (engine code M54B30)

CAUTION: Support washers not supplied!

We recommend that you replace the cylinder head bolts of your engine block after opening for maintenance and / or repair (cylinder head gasket replacement type ..). Indeed, these screws require a specific tightening procedure and cannot be reused during reassembly.

Screw M 11 x 1,5 mm
Length : 142 mm

For :
VW Golf 3, Vento, Corrado, Passat :
- 2.0 GTI 16S 150cv (ABF)
- 2.0 16S 136cv (9A since n° 131 264->)

Cylinder head screw for Porsche Boxster 987 :

- 987 2.7 Boxster phase 1 - 240 hp (M96.25) from 2005 to 2006
- 987 3.2 Boxster S phase 1 - 280 hp (M96.26) from 2005 to 2006
- 987 2.7 Boxster phase 1 - 245 hp (M97.20) from 2007 to 2008
- 987 3.4 Boxster S phase 1 - 295 hp (M97.21) from 2007 to 2008
- 987 3.4 Boxster RS 60 Spyder - 303 hp (M97.22) of 2008

Dimensions : M10 x 230 mm

Quantity per vehicle : 24

Sold individually

Complete set of 12 cylinder head screws for BMW 3 series E46 with 4 cylinder gasoline engine from 01/2001 to 08/2006:

E46 Sedan:
- 316i 4cyl 115hp phase 2 from 05/2001 to 02/2004 (engine code N42B18)
- 316i 4cyl 115hp phase 2 from 09/2003 to 01/2005 (engine code N46B18)
- 318i 4cyl 143hp phase 2 from 03/2001 to 03/2004 (engine code N42B20)
- 318i 4cyl 150hp phase 2 from 09/2003 to 02/2005 (engine code N46B20)

E46 Touring:
- 316i 4cyl 115hp phase 2 from 10/2001 to 02/2004 (engine code N42B18)
- 316i 4cyl 115hp phase 2 from 10/2003 to 07/2005 (engine code N46B18)
- 318i 4cyl 143hp phase 2 from 12/2000 to 02/2004 (engine code N42B20)
- 318i 4cyl 150hp phase 2 from 10/2003 to 07/2005 (engine code N46B20)

E46 Compact:
- 316ti 4cyl 115hp phase 1 from 01/2001 to 03/2003 (engine code N42B18)
- 316ti 4cyl 115hp phase 2 from 04/2003 to 02/2004 (engine code N42B18)
- 316ti 4cyl 115hp phase 2 from 09/2003 to 12/2004 (engine code N46B18)
- 318ti 4cyl 143hp phase 1 from 03/2001 to 03/2003 (engine code N42B20)
- 318ti 4cyl 143hp phase 2 from 04/2003 to 02/2004 (engine code N42B20)
- 318ti 4cyl 150hp phase 2 from 09/2003 to 12/2004 (engine code N46B20)

E46 Coupe:
- 318ci 4cyl 143hp phase 1 from 12/2000 to 02/2004 (engine code N42B20)
- 318ci 4cyl 150hp phase 2 from 10/2003 to 05/2006 (engine code N46B20)

E46 Convertible:
- 318ci 4 cyl 143hp phase 1 from 03/2001 to 02/2004 (engine code N42B20)
- 318ci 4 cyl 150hp phase 2 from 09/2003 to 08/2006 (engine code N46B20)

WARNING: Supporting washers not supplied!

We recommend that you replace the head screws of your engine block after opening for maintenance and/or repair (head gasket replacement type..). Indeed, these screws require a specific tightening procedure and cannot be reused upon reassembly.

For A6 (C5):
- 2.7 Turbo 230hp and 250 hp (AJK, ARE, BES)
- 2.8 180 hp and 190 hp (ATX, AGE)
- 2.8 193 hp (ACK, ALG, AMX, APR, AQD)
- Allroad 2.7 250 hp Turbo (ARE, BES) from 00 ->05

For A3 (8P):
- 1.6 FSi 115 hp (BAG, BLF, BLP)

For A4 (B5):
- 2.4 163 hp and 165 hp (APZ, AMM, AGA, AGJ, ALF, AML, APS)
- 2.8 193 hp (ACK, ALG, APR, AQD)
- S4 265 hp (AGB)
- RS4 (ASJ, AZR)