Brake hoses

Rear brake hose for:
- 356 B and C 1.6 to 2.0 from 01/1959 to 12/1965
- 911 2.0 from 01/1963 to 08/1967
- 912 1.6 from 01/1965 to 08/1967

Rear brake hose for :
- 911 from 1969 to 1983
- 912 from 1969
- 914-4 1.7 from 1970 to 1971
- 914-6 from 1970 to 1971

Suitable for right and left sides.

Rear brake hose for:
- 911 3.2 from 1984 to 1989
- 930 3.3 from 1984 to 1989
- 964 3.3 to 3.6 from 08/1989 to 07/1993

These GOODRIDGE metal braided hoses withstand the pressure of the brake fluid and high temperatures. This aviation technology is derived from motor sport and avoids the "soft pedal" effect of the original hoses.

JP GROUP front brake hose for Volkswagen Scirocco 3
For VW Scirocco 3 all models from 2009 to 2017Sport and standard chassis
Left or right sideSold individually

Right rear brake hose for Mazda MX-5 NB and NBFL

For NB and NBFL all models
Right rear hose with integrated receiver

Passenger side

Left or right-hand hose
Dimensions: M10 x 1 x 295 mm

Brake line banjo bolt gasket for MX-5 NA

- Made of copper
- Sold individually

Fits all MX-5 NA models

Banjo bolt copper gasket for Mazda MX5 NB and NBFL brake hose

For NB and NBFL all models

Requires 2 seals per fitting
Sold individually

Banjo bolt copper gasket for Mazda MX5 NC and NCFL brake hose

For NC and NCFL all models

Requires 2 seals per fitting
Sold individually

This SASIC front brake hose for Peugeot 204 and 304 - 370mm is close to original quality.
Front brake hose for Peugeot 204 and 304 male/female is M10x100, it is compatible with all models from September 1975,

This SASIC front brake hose for Renault 18 - 370mm is original equipment.
Front brake hose for Renault 18 male/female M10x100, compatible with models equipped with 1.4L and 1.6L petrol engines from April 1978 to 87.

This SASIC front brake hose for Peugeot 504 - 370mm is close to original quality.
Front brake hose for Peugeot 504 male/female is M10x100, it is compatible with all models from September 1975, except Pick-up.
Also used as hydraulic hose for Peugeot 205 T16 clutches.

This SASIC front brake hose for Peugeot 404 and 504 - 401mm is near-original quality.
Front brake hose for Peugeot 404 and 504 male/female is M10x100, it is compatible with all models equipped with DANGEL 4X4 all-wheel drive from September 1980, except Pick-ups.
It was only fitted to Pick-ups from September 1982, and has been fitted to all Peugeot 505 models.

Front and rear brake hose for all Porsche 911 type 996 :

- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera from 1998 to 2001
- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera 4 from 1998 to 2001
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 3.6 Turbo - 420 hp (M96.70) from 2000 to 2005
- 996 3.6 Turbo X50 - 450 hp (M96.70) from 2001 to 2005
- 996 3.6 Turbo S - 450 hp (M96.70) of 2005
- 996 3.6 GT2 - 462 hp (M96.70SL) from 2001 to 2004
- 996 3.6 GT2 - 483 hp (M96.70SL) of 2005
- 996 phase 1 3.6 GT3 - 360 hp (M96.76) from 2000 to 2001
- 996 phase 2 3.6 GT3 - 380 hp (M96.79) from 2004 to 2005
- 996 phase 2 3.6 GT3 RS - 380 hp (M96.79) of 2004

Length : 320 mm

This SASIC brake hose for RENAULT 18 - 401mm is close to original quality.
Brake hose for Peugeot 18 male/female is M10x100, it has been fitted on the following models:
Rear brake hose :RENAULT 18- Renault 18 TL R1340 04/1978 to 06/1989 Cléon-Fonte 1397cm3 64hp (C1J)- Renault 18 TL Break R1350 04/1979 to 06/1981 Cléon-Fonte 1397cm3 64hp (C1J)- Renault 18 GTL R1340 04/1978 to 06/1981 Cléon-Fonte 1397cm3 64hp (C1J)- Renault 18 GTL R1341 07/1981 to 06/1989 Cléon-Alu 1647cm3 74hp (A2M-843)- Renault 18 GTL Break R1351 07/1981 to 06/1989 Cléon-Alu 1647cm3 74hp (A2M-843)- Renault 18 GTL Break 4x4 07/1984 to 06/1986 Cléon-Alu 1647cm3 74hp (A2M-843)- Renault 18 GTD Break 4x4 07/1984 to 06/1986 Douvrin 2068cm3 67hp (J8-852)
Front brake hose :RENAULT 18- Renault 18 TD/GTD R1344 07/1980 to 06/1984 Douvrin 2068cm3 67hp (J8-852)- Renault 18 TD/GTD Break R1354 07/1980 to 06/1984 Douvrin 2068cm3 67hp (J8-852)- Renault 18 Turbo D 01/1984 to 06/1986 Douvrin 2068cm3 88hp (J8-852-10)- Renault 18 Break Turbo D 01/1984 to 06/1986 Douvrin 2068cm3 88hp (J8-852-10)- Renault 18 GTD Break 4x4 07/1984 to 06/1986 Douvrin 2068cm3 67hp (J8-852)
RENAULT 20- Renault 20 LS R1277 07/1979 to 12/1983 Douvrin 1995cm3 104hp (J6R-829)- Renault 20 TS R1272 07/1977 to 06/1979 Douvrin 1995cm3 109hp (J6R-829)- Renault 20 TS R1277 07/1979 to 12/1983 Douvrin 1995cm3 104hp (J6R-829)
RENAULT 30- Renault 30 Turbo D R1270 07/1981 to 12/1983 Douvrin 2068cm3 85hp (J8-852-10)
RENAULT FUEGO- Renault Fuego GTX 07/1980 to 06/1985 Douvrin 1995cm3 110hp (J6R-829)

Kit of 6 GOODRIDGE aviation brake hoses for BMW 3 series E36:

- All models with rear disc brakes (including M3)

ATTENTION: Not suitable for models with option S214 (ASC T automatic stability control)!

These braided stainless steel brake hoses , covered with a protective sheath, eliminate the pumping effect of the brake pedal, increase braking efficiency (no feeling of "fading") while offering high resistance to brake fluid pressure and high temperatures.

Resistant to abrasion and corrosion.
Racing-derived aviation technology.
Cost-effective replacement for original hoses.

INFORMATION: These are "adaptable" quality parts which do not have the original manufacturer's assembly with coding (see photos). However, they are suitable for the models mentioned, their dimensions and male-female threads respecting the original assembly.

Set of 6 GOODRIDGE"aviation" brake hoses for BMW 3 Series E30:

- All models (2-door sedan, 4-door sedan, Cabriolet and Touring with automatic or manual gearbox, phase 1 and 2).

Sealing washers may or may not be supplied with the hoses, depending on how they were originally fitted.

WARNING: Not suitable for 4-wheel drive and drum brake versions!

These armored brake hoses in braided steel with a protective sheath eliminate the pumping effect of the brake pedal, increase braking efficiency (no feeling of fading) and are highly resistant to brake fluid pressure and high temperatures.

Resistant to abrasion and corrosion.
Long service life.
Racing-derived aviation technology.
Cost-effective replacement for original rubber hoses.

Set of 6 GOODRIDGE brand brake hoses "aviation" type for BMW series 3 E30 :

- All models (2-door, 4-door sedan, Cabriolet and Touring in automatic or manual gearbox phase 1 and 2)

Sealing washers supplied or not with the hoses depending on the original assembly.

CAUTION: Not suitable for 4WD 325ix versions!

These armored braided steel brake hoses coated with a protective sheath eliminate the pumping effect of the brake pedal, increase braking efficiency (no feeling of fading) by offering great resistance to fluid pressure brake and high temperatures.

Abrasion and corrosion resistant.
Longer life.
Aviation technique resulting from competition.
Favorable replacement of the original rubber hoses.

Set of 4 GOODRIDGE brand brake hoses "aviation" type for BMW series 3 E46 :

- All petrol and diesel models from 1998 (Sedan, Coupé, Cabriolet and Touring)

Includes:
- 2 flexible 510 mm
- 2 flexible 470 mm
Sealing washers supplied or not with the hoses depending on the original assembly.

These armored braided steel brake hoses coated with a protective sheath eliminate the pumping effect of the brake pedal, increase braking efficiency (no feeling of fading) by offering great resistance to fluid pressure brake and high temperatures.

Abrasion and corrosion resistant.
Longer life.
Aviation technique resulting from competition.
Favorable replacement of the original rubber hoses.