Brake calipers

Front right caliper for Citroën ZX

This reconditioned Bendix type right front caliper for Citroën ZX is an original reconditioned part.

This right front brake caliper for Citroën ZX with 48mm diameter piston is an original part. It has been reconditioned in strict compliance with the original by our partner.
Our reconditioned calipers benefit from the highest quality reconditioning available on the market. Disassembly, inspection, identification, cleaning and bead-blasting, rechecking, surface treatment, rechecking, engraving, automatic replacement of all components other than the cast body, even the pistons - everything is carried out by our ISO 90001-certified partner.

For Citroën ZX :
- ZX 1.1 (03/1991-08/1997) 1124cm3 60hp
- ZX 1.4 (03/1991-08/1997) 1360cm3 75hp
- ZX Break 1.4 (03/1991-08/1997) 1360cm3 75hp
- ZX 1.6 (03/1991-08/1997) 1580cm3 89hp
- ZX 1.9D (03/1991-08/1997) 1905cm3 71hp
Bendix mounting only

The list of compatible models is given for information only. Remember to check your braking system to identify the original mounting (Bendix, Girling or ATE) and compare the shape and dimensions of your calipers.

Rear caliper guide bushes for VW LT35 from 1996 to 2006 with BOSCH / ATE mounting only

Reconditioned right rear brake caliper for Bmw 3 Series:
Bmw 3 Series E30 Touring ;
- 316i 102hp from 06/1991 to 02/1994 (engine code M40B16)- 318i 115hp from 02/1989 to 02/1994 (engine code M40B18)- 320i 6cyl 129hp from 01/1988 to 04/1991 (engine code M20B20)- 325i 6cyl 170hp from 07/1987 to 04/1993 (engine code M20B25)- 324td 6cyl 115hp from 01/1988 to 05/1993 (engine code M21D24)
Bmw 3 Series E30 Cabriolet :
- 318i 115hp from 07/1990 to 04/1993 (engine code M40B18)

For Polo 9N1 and 9N3
with front axle reference code on service book:
- PR-1LQ, 1LR, 1ZF, 1ZG, 1ZJ

RIDEX rear left caliper for Audi TT
For Audi TT (8N) with code 1KF (Rear disc 260x12mm) :- 1.8T Quattro 224hp (APX, BAM, BEA)- 1.8T Quattro 245hp (BFV)- 3.2 V6 Quattro 250hp (BHE)
Left side (driver)

Brake calliper banjo bolt for MX-5 NA

- Allows pipes to be fixed to the brackets
- genuine Mazda part

Fits all MX-5 NA models

Genuine reconditioned left rear brake caliper for Mercedes W123

This reconditioned Girling left rear brake caliper for Mercedes W123 with 2 pistons diameter 38mm is an original reconditioned part.

This Girling left rear brake caliper for Mercedes W123 is an original part. It has been reconditioned in strict compliance with the original by our partner.
Our reconditioned calipers benefit from the highest quality reconditioning available on the market. Disassembly, inspection, identification, cleaning and bead-blasting, new inspection, surface treatment, new inspection, engraving, automatic replacement of all components other than the cast body, even the pistons, everything is carried out by our ISO 90001-certified partner.

For Mercedes W123 sedan:
- 200 (123.020) from 01/1976 to 11/1985
- 200 D (123.120) from 01/1976 to 04/1985
- 220 D (123.126) from 01/1976 to 01/1979
- 230 (123.023) from 01/1976 to 01/1981
- 230 E (123.223) from 06/1980 to 11/1985
- 240 D (123.123) from 01/1976 to 11/1985
- 250 (123.026) from 01/1976 to 12/1985
- 280 (123.030) from 01/1976 to 07/1981
- 280 E (123.033) from 01/1976 to 12/1985
For Mercedes C123 Coupé :
- 230 C (123.043) from 03/1977 to 08/1980
- 230 CE (123.243) from 06/1980 to 08/1985
- 280 C (123.050) from 03/1977 to 03/1980
- 280 CE (123.053) from 03/1977 to 08/1985
- 300 D (123.130) from 01/1976 to 11/1985

Girling mounting only
The list of compatible models is given for information only. Remember to check your braking system to identify the original mounting (Bendix, ATE or Girling) and compare the shape and dimensions of your calipers.

Complete caliper mounting and connection kit containing :
2 aluminum plates, 8 spindle mounting bolts, 4 caliper mounting bolts, 6 anti-loosening washers, 2 rigid hoses to extend the original hoses and 2 additional bearing seals. German "CSP" manufacturing quality
Allows original disc brakes to be fitted to the front stub axles of Beetles 1302 and 1303 equipped with stub axles for drum brakes. All Sedan and Convertible models, 08/1970 ->01/1980.

This BENDIX right front caliper for Citroën VISA and Peugeot 104 and 304 - 48 mm is original equipment.

A single-piston caliper, it is compatible with a large number of PSA group city cars from the late 70's to the early 90's.

Compatible models :

CITROËN LNA
- 0.6L (1978/11-1986/07)
- 1.1L (1982/08-1983/12)

CITROËN VISA
- 0.6L (1978/09-1988/06)

TALBOT SAMBA
- 0.9L (51A601, 51A591) (1981/01-1985/12)
- 1.1L (51A611, 51A702) (1981/01-1986/06)
- 1.4L (51A632) (1981/01-1986/06)
- 1.4L Rallye (51A642) (1983/01-1986/10)
- 1.2L Rallye (51A692) (1983/01-1986/10)
- Convertible1.4 (51E642) (1981/01-1986/06)

PEUGEOT 104
- 1.0L (1983/09-1988/06)
- 1.1L (1980/08-1988/06)
- 104 Coupé 0.9L (1973/09-1983/10)
- 104 Coupé 1.1L (1979/08-1983/06)
- 104 Coupé 1.4L (1979/08-1984/06)

PEUGEOT 304
- 1.3L GL (M01) (1972/09-1979/10)
- 1.4L D (M20) (1976/10-1979/10)
PEUGEOT 304 Estate
- 1.1L (D11) (1976/10-1980/10)

Reconditioned GIRLING front left brake caliper (original caliper)Supplied without pads.Piston diameter : 54 mm.Version with 2 bleeders per caliper.Please check this information on your caliper before ordering.
For VW :- Transporter T25 / T3 from 06/1979 to 07/1985

This rear caliper cap for Alpine A110 berlinette (01/1963-07/1977) - 45 mm is a quality reproduction.

This rubber rear brake caliper cap for Alpine A110 is compatible with models equipped with Bendix "Big Brakes" type 45mm floating calipers.

Rear stabilizer bar hinge pin for Porsche 911 type F from 1969 to 1973 :

- 911 2.0 T / E / S from 1967 to 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973

The axle is sold individually , and two quantities are required per vehicle.

Left rear brake caliper for Citroën GS and GSA

This left rear brake caliper for Citroën GS and G SA is an original reconditioned part.

This reconditioned left rear brake caliper for Citroën GS and GSA is an original part. It has been refurbished in strict compliance with the original by our partner.
Our reconditioned calipers benefit from the highest quality reconditioning available on the market. Disassembly, inspection, identification, cleaning and bead-blasting, rechecking, surface treatment, rechecking, engraving, automatic replacement of all components other than the cast body, even the pistons, are all carried out by our ISO 90001-certified partner.

For Citroën GS :
- GS 1.2 (04/1973-06/1979) 1220cm3 58hp
- GS Break A 1.2 (04/1973-06/1979) 1220cm3 58hp

For Citroën GSA :
- GSA 1.3 (09/1979-07/1986) 1299cm3 65hp
- GS Break A 1.3 (09/1979-07/1986) 1299cm3 65hp
- GSA Break Special (07/1980-05/1982) 1220cm3 58hp

Rear left calliper for VOLKSWAGEN Transporter T6 all versions and engines.

Front brake caliper upper spring plate for Porsche 911 type G Turbo and Turbo Look from 1984 to 1989:

- 911 Carrera 3.2 from 1984 to 1989 only with Turbo-Look option (option code M491)
- 911 Turbo 3.3 from 1983 to 1989

The spring plate is sold individually and is suitable for both left and right sides.

Front right brake caliper in original quality for VW Combi Bay Window from 08/1972 to 07/1979 from chassis n°2132000001.
Supplied with brake pads.

Reconditioned front left brake caliper for Mini:
Mini R50 :
- Cooper 1.6L 116hp from 09/2000 to 11/2006 (engine code W10B16)- One 1.6L 90hp from 09/2000 to 11/2006 (engine code W10B16)- One D 1.4L 75hp from 06/2002 to 06/2004 (engine code W171ND-TV)- One D 1.4L 88hp from 07/2004 to 07/2006 (engine code W171ND-TV)

Front right brakecaliper for Bmw 3 Series:
Bmw 3 Series E30 Sedan:
- 316 1.8L 90hp phase 1 from 03/1983 to 08/1987 (engine code M10B18)- 316i 1.8L 90hp phase 2 from 09/1987 to 07/1988 (engine code M10B18)- 316i 102hp phase 2 from 07/1987 to 12/1990 (engine code M40B16)- 318i 105hp phase 1 from 02/1983 to 08/1987 (engine code M10B18i)- 318i 115hp phase 2 from 09/1987 to 04/1991 (engine code M40B18i)
Bmw 3 Series E30 Coupé:
- 316 1.8L 90hp phase 1 from 03/1982 to 08/1987 (engine code M10B18)- 316i 1.8L 90hp phase 2 from 09/1987 to 07/1988 (engine code M10B18)- 316i 102hp phase 2 from 09/1987 to 04/1991 (engine code M40B16)- 318i 105hp phase 1 from 03/1982 to 08/1987 (engine code M10B18i)- 318i 115hp phase 2 from 09/1987 to 04/1991 (engine code M40B18i)
Warning! Not suitable for versions with ABS.
New brake caliper without exchange.

Brake calliper for driver side,

For A4 (B5):
- With brake code 1LZ

Set of guide bushings without guide bolt for front brake caliper for Peugeot 205 GTI 1.9 L

These guide bushings for 205 GTI with higher quality than the original are from MEYLE Original Quality.

These bushings have significantly higher durability compared to original type guide bushings.

They only fit these GTI models in Phase II:

- 205 GTI 1.9 L - 120hp from 10/1987 to 10/1994
- 205 GTI 1.9 L - 128hp from 10/1987 to 09/1998

Also suitable for a utility version:

- 205 Van 1.7 L Diesel - 60hp from 03/1994 to 05/1997

Guide bolt not included.