Wheel cylinder

Right front wheel cylinder for Renault Dauphine

For Renault Dauphine:
- Renault Dauphine (R1090) from 03/1956 to 06/1962 - Billancourt 845cm3 26hp
- Renault Dauphine (R1090) from 07/1962 to 06/1963 - Billancourt 845cm3 32hp
- Renault Dauphine Gordini (R1091) from 07/1957 to 12/1960 - Ventoux 845cm3 33hp
- Renault Dauphine Gordini (R1091) from 09/1962 to 09/1963 - Ventoux 845cm3 33hp

This original-quality drum brake cylinder for right front wheel is mounted with the bleed facing up and the pipe facing forward.
Diameter 22mm

This LPR short left rear wheel cylinder for Peugeot 504 (09/1968-12/1989) - 22mm - M10 is an excellent quality reproduction.
The body of this right rear wheel cylinder for Peugeot 504 is shorter than PE30329 , it is compatible with a large number of models with Bendix system. Please refer to the detailed technical specifications below.
It has also been fitted to Peugeot 505s.

Suitable for mounting with pressure regulator for:
- Polo 6N1 from 94 ->99

LPR25.4mm rear wheel cylinder for Fiat 500 Topolino A and B (1936-1949)
Can be mounted on right or left side
Brake system: Bendix
Hole spacing: 35.5mm
Sold individually

Suitable for:
- Golf 3
- Golf 3 Cabriolet from chassis 1E-SK016364->

For Polo 6N2:
-1.0 50hp (ALD, AUC)
- 1.4 54hp (AKP)
- 1.4 60hp (AKK, AUD)
- 1.4 75hp (AHW, APE, AUA) with ABS
- 1.4 TDi 75hp (AMF) with ABS
- 1.7 SDi 60hp (AKU)
- 1.9 D 64hp (AEF, AGD, ASX)

Suitable for mounting with pressure regulator for Polo 6N1since 94 ->99

Front wheel cylinder for Peugeot 404 and 504 with Bendix braking system, replaces your worn original part with new.

Specifications :
Material: Grey cast iron
Braking system: Bendix
Thread: 3/8 24 UNF
Space between mounting holes [mm]: 22
Piston diameter [mm]: 30

Peugeot original part number: 4401.24

This LPR short left rear wheel cylinder for Peugeot 504 with TRW system - 22mm - M10 is an excellent quality reproduction.
The body of this left rear wheel cylinder for Peugeot 504 is compatible with a large number of French production models from the 80's with TRW - GIRLING system. Please refer to the detailed technical specifications below.
It has also been fitted to the Peugeot 505 and 309.

This Front Wheel Cylinder STOP for 2cv van key of 9 (10/1967-01/1972) - 28.6mm is original quality.

This Front Wheel Cylinder for 2CV is an original fitment.
It is compatible with models with 200mm and 220mm drum front brakes and 4.5mm hose and 9 key.

- 2CV AZU : 03/1968-01/1972
- 2CV AKB : 10/1967-06/1970

Attention!! your vehicle may have been modified, check the diameter of the wheel cylinder and the wrench needed to tighten the brake hose ends.
Only use DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, the wrong brake fluid could severely damage your brake system.

Ce cylindre de roue arrière type BENDIX pour Renault 4 (03/1965-05/1986) - 19,05 mm est fidèle à l'origine.

Ce cylindre de roue arrière pour R4 type BENDIX est compatible avec les modèles suivant:

R4 Berlines:
- R1123 de 09/1974 à 12/1986
- R1126 simple circuit de 09/1974 à 12/1982
- R1126 double circuit ( L/TL/Safari) de 10/1976 à 12/1982

R4 Fourgonnettes:
- R2102 de 03/1965 à fin de production
- R2104 de 03/1965 à fin de production
- R2105 jusqu'au châssis 44278e
- R2106 jusqu'au châssis 21794e

Les modèles exports C à D et beaucoup de modèles scandinaves ont eux aussi utilisé de cylindre de roue.

ATE brake cylinder for front wheel
Piston diameter (inside the cylinder!): 22.2 mm
German quality

- For VW Cox and Karmann Ghia (10/1957-) (except 1302 / 1303)
- Kübel 181 (08/1969 -12/1979)

This rear wheel cylinder for Citroën Ami after 1964 has a 17.5mm diameter piston.
This rear wheel cylinder for Ami is faithful to the original.This rear wheel cylinder is compatible with Ami models from July 1964.
It is connected to the brake pipes using a 9mm key.
Caution: your vehicle may have been modified, so check the diameter of the wheel cylinder and the wrench required to tighten the brake hose ends.Use only DOT4 or DOT5 brake fluid.LHM fluid is highly corrosive to parts not intended for its use, and the wrong brake fluid can seriously damage your braking system.

For Golf 3 Cabriolet up to chassis ->1E-SK016363 (up to 1995)

This TRW BWF 127 left rear wheel cylinder for Renault - 20.6mm is an original type.

Wheel cylinder with integrated regulator, it was fitted to a large number of late 20th century vehicles produced by Renault.

Compatible models :
RENAULT SUPER 5
- 1.0 (B/C/400) (1984/10-1988/10)
- 1.1 (B/C/401, B/C40H) (1986/01-1995/03)
- 1.1 (B/C/401) (1984/10-1988/10)
- 1.4 (B/C402) (1984/10-1988/06)
- 1.4 (B/C403) (1984/10-1989/07)
- 1.4 (B/C40M) (1987/06-1990/08)
- 1.4 (B/C40J) (1987/06-1989/07)
- 1.7 i (C409) (1986/10-1991/08)
- 1.7 (B/C40K, B/C40G) (1987/06-1995/03)
- 1.6 D (B/C/404) (1985/08-1996/12)-7
- 1.7 (B/C408) (1986/10-1995/03)
- 1.4 Cat (B/C/407) (1985/10-1996/12)
- 1.2 (B/C40F) (1987/01-1990/08)
- 1.6 D (1985/04-1990/12)
- 1.1 (1989/10-1990/12)
- 1.4 (1986/08-1996/12)

RENAULT EXPRESS
-1.4 (F40M) (1986/03-1991/08)
- 1.6 D (F404) (1986/03-1998/08)
- 1.9 D (F40P, F40N, F40E) (1991/09-1998/03)
- 1.4 Cat (F407) (1988/08-1998/03)
- 1.4 (F40U, F40V) (1991/09-1998/03)
- 1.9 D (F40R) (1994/09-1998/03)
- 1.4 (F40D) (1994/01-1998/03)
- 1.4 (F402) (1985/07-1991/08)
- 1.0 (S400) (1984/10-1988/10)
- 1.1 (S401) (1984/10-1996/12)
- 1.2 (S40F, S407) (1987/01-1996/12)
- 1.6 D (S404) (1984/10-1996/12)
- 1.4 (1985/09-1986/07)

RENAULT CLIO I
- 1.9 D (B/C/S576, B/C/S57L) (1991/01-1998/09)
- 1.2 (B/C/S57A, B/C57S, 5/357F, 5/357J, 5/357L, 5/357R) (1990/05-1998/09)
- 1.4 (B/C57T, B/C57Y) (1991/01-1998/09)
- 1.8 16V (C57D) (1991/01-1996/03)
- 1.8 (B/C57C, B/C57U) (1991/01-1998/09)
- 1.8 (B/C57C, C579, B/C57U) (1994/08-1996/04)
- 1.8 Rsi (B/C57H) (1995/08-1998/09)
- 1.8 Rsi (B/C579) (1993/01-1995/08)
- 1.2 (5/357Y, 5/357K) (1996/01-1998/09)
- 1.1 (1992/04-1992/08)1.9 D (1996/05-1998/02)
- 1.7 (B/C574) (1991/01-1993/12)1.8 (1990/08-1996/04)
- 1.2 (B/C57R, B575, B57A) (1991/01-1996/06)
- 1.4 (1991/01-1998/09)1.2 (B/C/S577) (1996/01-1996/12)
- 1.4 (B57J, C57J, B57P) (1991/01-1998/09)
- 1.2 (B/C/S572) (1990/05-1996/03)

This repair kit - STIB - for rear wheel cylinders on DYANEs -DOT4- 19mm is for restoring a wheel cylinder.

This DOT 4 rear wheel cylinder repair kit contains the new rubber components to restore a 19mm diameter DOT 4 rear wheel cylinder.

Rear wheel cylinder receiver
Left or right side, sold individually.
Diameter: 20.64 mm
Models equipped with rear drum brakes.
German FEBI superior quality.

For VW Transporter T4, Multivan
Years: 09/1990 -> 12/1995
including Syncro version (4 x 4)
up to chassis no. -> 70-T-199 999.

This repair kit for rear wheel cylinders on Meharis up to July 1977 -DOT4- 17.5mm is for restoring a wheel cylinder.

This DOT 4 rear wheel cylinder repair kit contains the new rubber components to restore a 17.5mm diameter DOT 4 rear wheel cylinder.

For Golf 3 without pressure regulator

M7x38mm aluminum rear wheel cylinder bleedscrew for Volkswagen Polo 6N2:
-1.0 50hp (ALD, AUC)- 1.4 54hp (AKP)- 1.4 60hp (AKK, AUD)- 1.4 75hp (AHW, APE, AUA) with ABS- 1.4 TDi 75hp (AMF) with ABS- 1.7 SDi60hp (AKU)- 1.9 D 64hp (AEF, AGD, ASX)
Dimensions: M7x38mm
This conicalair bleed screw fits aluminum wheel cylinder OEM part number 6N0611053.