Wheel hub

This rear hub nut for 2cv vans - M34 - 44mm is true to the original.

This high quality rear wheel bearing nut is made of chromated steel. It is compatible with all models of 2cv cars and derivatives and holds the rear wheel bearings.

Full front hub with bearing and magnetic ring, left or right side,

For A3 (8P) from chassis No. 8P-6A000 001->
with front axle brake code: 1ZF

(Model with 3 mounting bolts on the housing)

Wheel hub on left or rightrear drive shaft, sold individually. Supplied with studs for VW Transporter T25 / T3 from 05/1979 to 07/1992 including Syncro version (4x4) with 14" inch wheel.Center distance: 5 x 112 mm.

Bearing hub with ABS system ring,

Suitable for models with ABS and wheel center distance in 4 X 100:
- Golf 2 with ABS since 08/87
- Golf 3
- Corrado
- Passat 35i
- Ibiza (6K)

Rear right or left bearing for Golf 5, two-wheel drive (not for 4Motion)

Caution: the interior diameter of the bearing is 32 mm, to check on the vehicle (a 30 mm fitment also exists)

For Audi 100:
-All and Quattro except 2.2 Turbo and 4.2 V8

Rear hub bearing protection cap for Citroën ID.
This cap, also known as a dust cover, is fitted to the rear hub of the Citroën ID. It effectively protects the bearing against the ingress of dust, moisture and other external contaminants, prolonging bearing life.
Compatible with all Citroën ID models.

For allGolf 4 and New Beetle

FEBI rear wheel hub for Mercedes-Benz C-Class:
- Compatible with all Mercedes-Benz C-Class versions w203 Sedan, s203 Estate and cl203 Coupé from 05/2000 to 05/2008 including sports model type 55 AMG 5.4l 367hp.

For Audi 80 and 90 from chassis 89-J-371 599->:
- 4-cylinder
- 5-cylinder (KV, NG, NM, PS)

For Audi 80 and 90 Quattro with air conditioning:
-5-cylinder from 89-H-450 000 ->89-J-351 000

For Audi 80 and 90 Quattro (89, 8A) from 89-J-351 001:
- 1.8 88 hp, 90 hp and 93 hp (NE, SF, JN, PM)
- 1.8 112 hp and 113 hp (DZ, SD)
- 2.0 115 hp (AAD)
- 2.0 and 2.0 16V 113 hp and 137 hp (3A, 6A)
- 2.0 20V 160 hp (NM)
- 2.2 136hp (KV)
- 2.3 136 hp (NG)

Left or right rear hub with integrated bearing.
Sold individually

Compatible with Seat Ibiza type 6L

Febi front bearing wheel hub for Bmw 3 Series:
- Compatible with all Bmw 3 Series F30 Sedan and F31 Touring versions from 02/2011 to 03/2019, all engines included.
Sold individually.

Suitable for :
- Golf 3, Golf 3 Break, Golf 3 Syncro & Vento
- Corrado 2.9 190cv (VR6)
- Passat 3 since 10/1993 ->12/1996

Wheel hub front left or right with integrated wheel bearing and fluted ABS ring from FEBIfor BMW 3 Series E30 Sedan,Coupe, Touringand Cabrioletwith or without ABS :

- All gasoline and diesel models (except M3 and 325 ix 4-wheel drive)

This hub assembly comes with the wheel bearing already pressed in place. It is suitable for 4-hole rims with 100mm center distance. It is valid for models with ABS or not equipped with ABS (ABS ring does not interfere with the assembly on models without ABS).

This product is sold individually.

Wheel-side transmission seal for Citroën ID.
This seal, positioned in the groove of the wheel hub, is traversed by the transmission shaft. It plays an essential role in providing a seal between the hub and the shaft, preventing lubricant leakage or the intrusion of contaminants.
This assembly is specific to OE driveshafts. It is not required for Rzeppa replacement shafts, whose design makes this seal superfluous.
Dimensions: 104.8 X 109.9 X 8mm

FEBI M24 rear drive shaft nut for Bmw 3 Series:
- Compatible with all Bmw 3 Series E46 Sedan, Estate, Coupé and Cabriolet versions from 04/1997 to 08/2006 except 330i engine code m54 and 330d engine code m57 | m57n.
Please note:
- Not suitable for 4-wheel drive versions.- Not compatible with sport version type M3 E46.

Front hub of left wheel on driver's side or right on passenger's side with integrated wheel bearing for MINI III R57, R57LCI Cabriolet,R58 Coupeand R59 Roadster:

R57 Cabriolet:
- Cooper 1.6L 120hp from 10/2007 to 06/2010 (engine code N12B16)
- Cooper S 1.6L 175hp from 11/2007 to 07/2010 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 08/2008 to 07/2010 (engine code N14B16)

R57LCI Convertible:
- Cooper 1.6L 122hp from 09/2009 to 06/2015 (engine code N16B16)
- Cooper S 1.6L 184hp from 06/2009 to 06/2015 (engine code N18B16)
- Cooper S JCW 1.6L 211hp from 01/2010 to 07/2012 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 01/2012 to 05/2015 (engine code N18B16)
- Cooper SD 2.0L 143hp from 06/2009 to 05/2015 (engine code N47C20)
- Cooper D 1.6L 112hp from 05/2009 to 05/2015 (engine code N47C16)
- Cooper D 2.0L 112hp from 11/2010 to 05/2015 (engine code N47C20)
- One 1.6L 98hp from 09/2009 to 06/2015 (engine code N16B16)

R58 Coupe:
- Cooper 1.6L 122hp from 12/2010 to 04/2015 (engine code N16B16)
- Cooper S 1.6L 184hp from 12/2010 to 04/2015 (engine code N18B16)
- Cooper S JCW 1.6L 211hp from 12/2010 to 07/2012 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 11/2011 to 05/2015 (engine code N18B16)
- Cooper SD 2.0L 143hp from 12/2010 to 05/2015 (engine code N47C20)

R59 Roadster:
- Cooper 1.6L 122hp from 01/2011 to 04/2015 (engine code N16B16)
- Cooper S 1.6L 184hp from 01/2011 to 04/2015 (engine code N18B16)
- Cooper S JCW 1.6L 211hp from 05/2011 to 06/2012 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 01/2012 to 04/2015 (engine code N18B16)
- Cooper SD 2.0L 143hp from 01/2011 to 04/2015 (engine code N47C20)

Dimensions:
- Outside diameter: 137 mm
- Inside diameter: 27.5 mm
- Brake disc bore: 64.2 mm
- Rim bore: 56.1 mm
- Center distance: 4 x 100 mm
- Threading: M14 x 1.25

This product is sold individually.

FEBI front wheel hub for Peugeot 205
This OE-quality front wheel hub fits Peugeot 205 models without ABS, including GTI.
Suitable for left or right sideSupplied without bearing

For Audi 100 Quattro 5-cylinder chassis 44-J-200 100->
For Audi 200 Quattro chassis 44-J-200 100->

Front or rear wheel bearing hub
Left or right-hand side, sold per unit.

For VW Transporter T4 type 70/7D
All models 09/1990 ->06/2003
Including Syncro version (4 x 4).