Wheel flare

Left rear spindle for models with rear disc brakes, with or without ABS,

For VW Golf 3 and Vento:
- All models with disc brakes (except Syncro)

For Golf 3 convertible and Golf 4 Convertible:
- All models with disc brakes

Spacer on front rocket for Porsche 911, 912 and 930 :

-> Porsche 912 :
- 912 1.6 of 1969

-> Porsche 911 :
- 911 2.0 T / E / S of 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS of 1973
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1989

Suitable for Golf 2

Suitable for Polo 6N1 up to chassis ->6N-XY379991

Left or right front axlepivot joint for Brazilian VW Combi Split from 1957 to 1975.12 joints are required per vehicle.

Left or right rear stub axle/wheel hub.
Sold individually.

Compatible with Seat Leon type 1M with 2 wheel drive only

Suitable for Corrado

Suitable for Golf 2

Vaicofront right spindle for Peugeot 306 phase 1 with ABS (1993-1997)
Right-hand front spindle pivot, fits all phase 1 models with ABS
Not suitable for TU and TUD engines without ABS
Spindle diameter: 82mm

Replacement set forsteering pivot on front axle stub axle. Left or right side, sold for 1 side.
Original German quality.

For VW LT, 04/1975 -> 12/1995

Kitincludes:
- 1 stub axle pivot 24.7 x 132 mm
- 2 circlips 30 x 1.2 mm
- 2 A6 lubricators
- 2 o-rings
- 2 seal rings 25 x 30 x 4 mm
-1 bearing bush
- 2 domed discs
- 1 socket 25 mm
- 1 socket 24.7 mm

Conical stop bolt on steering pivot. This screw, which complies with the original, limits the turning angle.
Sold individually, 2 required per vehicle.
Does not mount on offsetstub axles.

For A3 (8L) All except Quattro

Right-hand stub-axle designed for fitting a brake calliper to a front axle with ball joints (except 1302 & 1303). Value for money.

For:
- Beetle, 1200, 1300, 1500, 08/1965 ->05/1968
Chassis no. 116 000 001 ->118 857 239:
replace the right-hand external ball joint part ref. VJ513161
and fit new bearings ref. VH27300 (various diameters).
- Beetle, 1200, 1300, 1500, from 05/1968->
from chassis no.118 857 240->

FORST rear spindle fixing screw for Volkswagen Golf 3
For VW Golf 3 all models
Fixes the spindle to the rear axle4 screws required per spindleSold individually
Original FORST quality

Suitable for Polo 6N1 from 04/96 ->99

Suitable for Golf 2

Left-hand stub axle nut for VW Combi Split from 08/1963 to 07/1967.

Impergom frontstub axle silentblock for Fiat 500 N, D, F, L and R (1957-1975)
This rubber silentblock is inserted in the upper part of the stub axle, where the transverse swingarm is attached.
Original quality part
Sold individually
For models listed below:- Fiat 500 N from 1957 to 1960- Fiat 500 D from 1960 to 1965- Fiat 500 F from 1965 to 1968- Fiat 500 L from 1968 to 1972- Fiat 500 R from 1972 to 1975

Right-hand stub axle, designed for rear discs, WITH ABS.

Compatible with Seat Ibiza type 6K until ->1999, until chassis ->6K-X-290000:
- 1.8 16s 129hp (ADL)
- 1.9 TDi 110hp (AFN)
- 2.0 115hp (2E, AGG)
- 2.0 16s 150hp (ABF)

Stub axle mounting kit for VW Combi Split up to 07/1967.