Wings

This left rear suspension arm stop bracket for 2cv saloons after 1973 is high quality.

The electro-galvanised steel used for this part is higher quality with corrosion resistance superior to the original.

This left stop bracket corresponds to the latest nesting model from 1973.

Right front fender to be painted, model without turn signal hole and triangle-shaped fitting slot
For VW Cox 1303 from 08/1974 to 01/1980 :- Sedan from 08/1974 to 07/1975 from chassis no. 135 2000 001 to no. 135 2600 000.- Convertible from 08/1974 to 01/1980 from chassis no. 155 2000 001 to no. 159 2050 000.

Rear right wing arch on passenger side for BMW series 3 E30 4 doors until 08/1987:

- Sedan
(including 4 wheel drive)

WARNING: Not suitable for Touring, 2-door Coupé, Cabriolet and M3 version!

This wheel arch edge (outer part) comes in black storage paint. It will be necessary to treat and prepare it in order to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly in order to check the alignment with the bumper and the setting on the body.

Quality part, called "adaptable" not coming from the original manufacturer.

Quality part, called "adaptable" not coming from the original manufacturer.

DANSK front left mud guard for Porsche 356 A de febrero from 1957, B T5, B T6 y C :

-> Porsche 356 A :
- 356 A 1300 - 44 hp (506/1) from 02/1957
- 356 A 1300 S - 60 hp (589/2) from 02/1957
- 356 A 1600 - 60 hp (616/1) from 02/1957 to 1959
- 356 A 1600 S - 75 hp (616/2) from 02/1957 to 1959

-> Porsche 356 B T5 :
- 356 B 1600 - 60 hp (616/1) from 1960 to 1961
- 356 B 1600 S - 75 hp (616/2) from 1960 to 1961
- 356 B 1600 Super 90 - 90 hp (616/7) from 1960 to 1961

-> Porsche 356 B T6 :
- 356 B 1600 - 60 hp (616/1) from 1962 to 1963
- 356 B 1600 S - 75 hp (616/12) from 1962 to 1963
- 356 B 1600 Super 90 - 90 hp (616/7) from 1962 to 1963

-> Porsche 356 C :
- 356 C 1600 - 75 hp (616/15) from 1964 to 1965
- 356 SC 1600 - 95 hp (616/16) from 1964 to 1965

This version of the mudguard is recognizable by its 4 ribs formed in the sheet metal.

Left front fender for Peugeot 205 GTI

This left front fender for Peugeot 205is only fitted to Phase I and Phase II GTIs. Suitable for the versions below:

Peugeot 205 Phase I

- 205 GTI 1.6 L - 116hp B6D (XU5JA) from 02/1983 to 07/1987
- 205 GTI 1.6 L - 105hp 180A (XU5J) from 06/1985 to 06/1987
- 205 GTI 1.6 L - 103hp 180A (XU5J) from 12/1984 to 10/1987
- 205 GTI 1.9 L - 102hp DFZ (XU9J1) from 03/1987 to 10/1987
- 205 GTI 1.9 L - 128hp D6B (XU9JA) from 10/1986 to 10/1987

Peugeot 205 Phase II


- 205 GTI 1.6 L - 103hp 180A, 180Z (XU5J) from 10/1987 to 12/1989
- 205 GTI 1.6 L - 116hp B6D (XU5JA) from 10/1987 to 12/1989
- 205 GTI 1.9 L - 102hp D2A (XU92C) from 10/1987 to 05/1989
- 205 GTI 1.9 L - 128hp D6B (XU9JA) from 10/1987 to 09/1998
- 205 GTI 1.9 L - 120hp DKZ (XU9JAZ) from 10/1987 to 10/1994
- 205 GTI 1.9 L catalyzed - 102hp DFZ (XU9J1) from 10/1987 to 07/1994

This complete left rear wing panel for 2cv saloons is high quality.

The wing panel on 2cv saloons is very exposed to corrosion, the electro-galvanised steel used for this part is higher quality with corrosion resistance superior to the original.
This rear wing panel with 2 grooves includes the reinforcement panel for securing the rear belts and the suspension stop bracket.
The stop bracket corresponds to the last stop models from 1973 onwards.
The front wing panels are not remanufactured, but you can adapt this part by re-welding the old model-s suspension stops.

Leftrear fenderarch for Bmw 6 Series : - Compatible with all Bmw 6 Series E24 versions from 10/1975 to 06/1989 including M6 Engine code m30.

Left front wing primed for storage,
For VOLKSWAGEN Transporter T5 from 2003 to 2015

wheel arch gasket for Citroën DS left rear fendershell.
This gasket ensures a perfect seal between the wing shell and the bodywork.
compatible models:DS 19 Sedans and Cabriolets (1911cc) - (1956-03/1965)DS 19/20 Sedans (1985cc) - (1966-1975)DSuper/DSpécial (1985cc) - (1972-1975)DS 21 Sedans and Cabriolets (2175cc) - (1966-1969)DS 23 Sedans (2347cc) - (1973-1975)

Rear section of the mudguard on front right-hand wing. Superior quality thick sheet metal equivalent to the original for perfect restoration!

For VW Kombi T2 Bay Window
Years: 08/1967 -> 07/1979

Repair plate for left running board with elbow at bottom of wheel arch on front fender, weldable for VW Transporter T25 / T3, Bus, Van, Caravelle, Carat, Joker, Syncro (4x4) from 05/1979 to 07/1992.

Driver's side front wing with oval side indicator slot,


Compatible with Seat Ibiza type 6L:
- All models

Right frontfender for Mini :
- Compatible with all Mini R55 Clubman versions from 10/2006 to 06/2014 including diesel model engine code n47n.
This body panel is delivered in storage paint. It will need to be treated and prepared to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly to check alignment and adjustment on the body.

Replacement plate for outside right rear wing arch for Mercedes W123 Saloon, S123 Estate and C123 Coupé
(Adaptable for Coupé C123 version)

Arc d'aile intérieur arrière droit pour Golf 1, en tôle

Passenger-side right front fender with hole for turn signal repeater grille for MINI II R50, R53 Sedan and R52 Convertible:

R50 Sedan :
- Cooper 1.6L 116hp from 09/2000 to 11/2006 (engine code W10B16)
- One 1.6L 90hp from 09/2000 to 11/2006 (engine code W10B16)
- One D 1.4L 75hp from 06/2002 to 06/2004 (engine code W171ND-TV)
- One D 1.4L 88hp from 07/2004 to 07/2006 (engine code W171ND-TV)

R52 Cabriolet :
- Cooper 1.6L 116hp from 11/2002 to 07/2008 (engine code W10B16)
- Cooper S manu. 1.6L 163hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2008 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2008 (engine code W11B16)
- One 1.6L 90hp from 01/2003 to 07/2008 (engine code W10B16)

R53 Sedan :
- Cooper S manu. 1.6L 163hp from 10/2000 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW GP 1.6L 218hp from 03/2006 to 09/2006 (engine code W11B16)

This body panel is delivered in storage paint. It will need to be treated and prepared to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly to check alignment and adjustment on the body.

This is an "adaptable" quality part, as it does not come from the manufacturer.

Front leftfender for Bmw Z4 Series:
- Compatible with all Bmw Z4 Series E85 Roadster and E86 Coupé versions from 01/2002 to 08/2008 including M Technic engine code s54.
This body panel is delivered in storage paint. It will need to be treated and prepared to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly to check alignment and adjustment on the body.

Left rear corner for VOLKSWAGEN Combi SPLIT Pick-up from 08/1966 to 07/1967.

This front wing attachment nut for 2cvs (1963-1991) secures the front wings.

Made of bi-chromated steel, this front wing nut is compatible with the 2cvs with the 5-ribbed bonnet from 1963.

Its free base remains stationary and protects the paint when clamped.

Front left mudguard for Volkswagen Golf 7
For VW Golf 7 Phase 1 (2012-2017) all models
Left side (driver)Front part of wheel arch