Silent blocks

Silentblock with 72 mm outer diameter.
Sold individually, 2 required for the rear axle

Compatible with Seat Ibiza type 6L if rear axle code: PR-0N2.

Set of two POWERFLEX polyurethane exterior silent blocks for a 21 mm sway bar for a VOLKSWAGEN Transporter T25 from 1979 to 1992

Left bracket rod between anti-roll bar and shock absorber.

Compatible with Seat Leon type 1M including 4 wheel drive, if 18, 19 or 20 mm anti-roll bar is fitted

For all A6 (C4) Saloon

!!! Caution : not suited to the Quattro versions and 2.0 101hp ->115hp engines (AAE, ADW, ABK) !!!

For VOLKSWAGEN Transporter T6, 21 mm diameter rear sway bar.

Sway bars are available in several diameters, please measure the one on your vehicle before ordering.

For models with 18.5 mm anti-roll bar (code 0BC)

Located at the front of the rear axle support,

For Roadster (E85):
- 2.0 i N46
- 2.2 i M54 from 09/06
- 2.5 i N52 from 09/06
- 2.5 if N52 from 09/06
- 3.0 i M54 from 09/06

Set of 2 heavy duty silentblocks located on the inside of the Mazda MX-5 NC et NCFL-s front lower suspension arm

- Position 6 on the diagram (see photo)

Complete kit for left and right arms
Fits all Mazda NC and NCFL models

POWERFLEX silentblocks have the double advantage of being very easy to fit and being unbeatably reliable and high-performance. Harder than the original rubber, they give you even more precision and stability when the chassis is under stress. They have a longer life span and fitting them with half-silentblocks is much easier.

Axle silent block for all E46 versions, except M3

Silencer for front axle, located in front of the cradle,

For A3 (8L):
- S3 210 hp (APY, AMK)
- S3 225 hp (BAM)

For Audi 80 and 90:
- 79 ->87 All 4-cylinder and 5-cylinder versions ->81-D-077 973
-Coupé 81 ->88 All 4-cylinder and 5-cylinder versions ->85-D-079 180
- 87 ->92 All 4-cylinder versions without power steering

Bush and screw kit for fitting the anti-roll bar

To replace the original rubber and improve front axle guidance

Screw M12 x 1.5 x 192 mm overall for VW Golf 2 COUNTRY 4x4 chassis

For Volkswagen Golf COUNTRY subframe.
The subframe of the Golf COUNTRY is equipped with 4 long fixing bolts. This bolt is the shorter version of the 2 models:
180 mm under head, pitch length 40 mm in 150 x 12 pitch

Rubber bumper on rear suspension arm
Left or right, sold individually.

For VW Trekker 181, IRS models
Years: 03/1973 ->12/1979
Chassis: since no. 183 2346 525->

Rear lower rubber bearing for:
- 914

Crenellated silent block mounted on the rear axle strut of the Porsche 356 B and C :

-> Porsche 356 B T5 :
- 356 B 1600 Carrera GS of 1959
- 356 B 1600 Carrera GT from 1960 to 1961
- 356 B 1600 from 1960 to 1961
- 356 B 1600 S from 1960 to 1961
- 356 B 1600 S 90 from 1960 to 1961

-> Porsche 356 B T6 :
- 356 B 2000 Carrera GS from 1962 to 1963
- 356 B 2000 Carrera GT of 1963
- 356 B 1600 from 1962 to 1963
- 356 B 1600 S from 1962 to 1963
- 356 B 1600 S90 from 1962 to 1963

-> Porsche 356 C :
- 356 C 2000 Carrera GS of 1964
- 356 C 1600 from 1964 to 1965
- 356 SC 1600 from 1964 to 1965

Depending on the model, your 356 B or 356 C can have, per rear axle strut, either :

- 2 RS91099 silent blocks (1 inside, 1 outside)
- 1 silent block RS91099 outside and 1 silent block RS91098 inside

Check before on the vehicle

Sold individually

Rear stabilizer bar silencer 20mm diameter for Porsche 911 Type 993 from 1994 to 1998 :
- 993 3.6 - 272hp (M64.05/06/07/08) Carrera from 1994 to 1995 only with sports chassis- 993 3.6 - 272hp (M64.05/07) Carrera 4 from 1995 only with sports chassis- 993 3.6 - 285hp (M64.21/22/23/24) Carrera and Carrera S from 1996 to 1998 only with sports chassis- 993 3.6 - 285hp (M64.21/23) Carrera 4 and Carrera 4S from 1996 to 1998 only with sports chassis- 993 3.8 - 300hp (M64.20) Carrera RS from 1995 to 1996
The silentbloc is sold individually , and two quantities are required per vehicle.

Rear suspension arm silent block
Left or right side, sold individually.
Position : Inside.

For VOLKSWAGEN Transporter T5 from 2003 to 2015.
For all models with a laden weight < 3.2 T

For Golf 6 and Golf 6 Plus
(including 4 Motion)

Not suitable for Sport, Avant and Quattro versions