Silent blocks

Stabilizer bar inner silencer for Porsche 944 from 1987 to 1991 :

- 944 phase 2 - 2.5 - 163hp (M44.05 to 08) from 1987
- 944 phase 2 - 2.5 - 160hp (M44.09/M44.10) from 1988
- 944 phase 2 - 2.5 S - 190hp (M44.40) from 1987 to 1988
- 944 phase 2 - 2.7 - 165hp (M44.11/M44.12) from 1989
- 944 phase 2 - 3.0 S2 - 211hp (M44.41) from 1989 to 1991

- 944 phase 2 - 2.5 Turbo - 220hp (M44.50/M44.51) from 1987 to 1988
- 944 phase 2 - 2.5 Turbo S/Cup M578 - 250hp (M44.52) from 1988
- 944 phase 2 - 2.5 Turbo - 250hp (M44.52) from 1989 to 1991

For 21.5mm diameter stabilizer bar.

This silentbloc is sold individually. Two quantities are required per vehicle.

Set of 2 heavy duty silentblocks located on the front anti-roll bar of the Mazda RX-8

- Position 2 on the diagram (see photo)

For 26.5mm anti-roll bar

POWERFLEX silentblocks have the double advantage of being very easy to fit and being unbeatably reliable and high-performance. Harder than the original rubber, they give you even more precision and stability when the chassis is under stress. They have a longer life span

Front sway bar inner silencer for Mercedes E-Class W124

Mounts on the inside of the front sway bar
Needs 2 quantities

For bar diameter 26.5mm
Think about checking the diameter in the middle of your front torsion bar order

POWERFLEX Black Series silentblocs for lower front suspension arm for Porsche Boxster 987 :

- 987 2.7 Boxster fase 1 - 240 cv (M96.25) de 2005 a 2006
- 987 3.2 Boxster S fase 1 - 280 cv (M96.26) de 2005 a 2006
- 987 2.7 Boxster fase 1 - 245 cv (M97.20) de 2007 a 2008
- 987 3.4 Boxster S fase 1 - 295 cv (M97.21) de 2007 a 2008
- 987 3.4 Boxster RS 60 Spyder - 303 cv (M97.22) de 2008
- 987 2.9 Boxster fase 2 - 255 cv (MA1.20) de 2009 a 2012
- 987 3.4 Boxster S fase 2 - 310 cv (MA1.21) de 2009 a 2012
- 987 3.4 Boxster Spyder - 320 cv (MA1.21) de 2010 a 2012

This kit is suitable for the 2 front lower arms (right + left) and allows the front camber angle to be adjusted by + or - 0.75 °.

Powerflex ref : PFF57-802

For all E39 models except 535 i, 540 i and M5

These reinforced models located on the upper suspension arms of the rear axle on the inner side (see number 9 on the diagram) offer a better guidance in support as well as an increased longevity compared to an original version,

For Audi A4 (B5) from 1994 to 2001:
- All models including "S4" and "RS4"
(Not suitable for cast steel arms)

Metal rubber slider for front/rear leaf spring suspension.
Inside diameter: 12 mm
2 required per vehicle, sold individually.
Original Volkswagen Classic Parts.

For VW LT, 04/1975->12/1995

Enables the link between the camber arm and the rear axle support, MEYLE ORIGINAL Quality,

For E90, E91, E92 & E93:
- All models (including xi/xd and M3)

For E90 LCI, E91 LCI, E92 LCI & E93 LCI:
- All models (including xi/xd and M3)

Set of 4 front lower linkage silentblocks for Mazda MX-5 NA

For MX-5 NA all models

Enables you to replace the silentblocks of your two front right and left lower linkages

2 silentblocks for the front linkage
2 silentblocks for the rear linkage

Kit for a vehicle
High quality adaptable parts

2 POWERFLEX Road Series silentblocs front anti-roll bar N°1 for Porsche 911 type 964 :

- 964 3.6 Carrera 2 and Carrera 4 from 1991 to 1994 - sport chassis M 030

These purple polyurethane silent blocks replace the original ones. They are perfectly suited for normal to sustained use on the road.

For stabilizer bar of diameter 22 mm

Quantity needed per vehicle : 1 Kit

Sway bar silent block, diameter 29mm

Front anti-roll bar outer silentblock for Mercedes

For Mercedes W123, C123 and S123 all models

These rubber bushes are used to attach the anti-roll bar to the front upper suspension arm at both ends
A worn out silentblock will make your anti-roll bar slam against the bodywork

2 required
Sold individually

German Quality

Meyle OE wheel-side tie rodsilencer for Bmw 3 Series:
- Compatible with all Bmw 3 Series E36 Sedan, Touring, Coupé and Cabriolet versions from 11/1989 to 12/1999, including sport model type M3 E36.
Please note
- Not suitable for Bmw 3 Series E36 Compact.
- Quantity required 2, sold individually.

Serrated urethane Silentblocks
External mounting on torsion blade
Inside diameter: 48 mm (1-7/8 inches)

For Beetle

Silentbloc for 22 mm anti-roll bar
Silentbloc inside diameter: 21 mm

Silencer for front axle, located in front of the cradle,

For TT (8N):
- 2WD from chassis no. 8N-Y-060001->
- Quattro all models

Rear control arm bush (axle beam), located towards the front.
One required per arm, sold individually.

Compatible with Audi A3 type 8L Quattro versions

Rubber silentbloc on oblique rear axle arm
2 required for one complete rear axle.
Left or right-hand side, sold per unit.
Superior quality part Original VW.

For Combi Bay Window all models, 08/1967 ->07/1979

Rear anti-roll bar silentbloc for Porsche 911 and 914 :

-> Porsche 911 : 4 per car
- 911 2.0 from 1965 to 1968
- 911 2.0 S from 1967

-> Porsche 914 : 2 per car
- 914-4 1.7 from 1970 to 1973
- 914-4 1.8 from 1974 to 1976
- 914-4 2.0 from 1973 to 1976
- 914-6 2.0 from 1970 to 1972

Diameter : 16 mm

Sold individually

High quality part, it is necessary2 per vehicle.

For Old Beetle 1302 or 1303 all models.