Silent blocks

Rear guide arm silentblock (half shaft), located towards the front.
One required per arm, sold individually.

Compatible with Volkswagen Golf 4 and Bora - 4 Motion version

High-quality stabilizer bar silencer for VW Transporter T4 from 09/1990 to 12/1995 up to chassis no. 70-T-199999 including Syncro version (4x4).
Diameter: 22.6 mm
Left or right side, sold individually.

For E28:
- All models

2 POWERFLEX Black Series silentblocs front anti-roll bar N°1 for Porsche 911 type 964 :

- 964 3.6 Carrera 2 from 1989 to 1994
- 964 3.6 Carrera 4 from 1989 to 1994

These black polyurethane silent blocks replace the original ones. They are perfectly suited for track use. They are more resistant and more stiffer than POWERFLEX purple Road Series. They offer very precise undercarriage guidance and allow you to obtain the best of your Porsche. Ideal if you are looking for the best lap time !

For stabilizer bar of diameter 20 mm

Quantity needed per vehicle : 1 Kit

Repair pin for rear suspension arm stop bracket.
Sold individually.
Left or right mounting

For VW Beetle, Karmann-Ghia

Silentbloc steering lever for Bmw 7 Series E32:

- Compatible with all Bmw 7 Series E32 versions from 10/1985 to 09/1994 including Bmw 7 Series E32 750i v12.

For Golf 4 and Bora, all models including R32 and 4Motion

Polyurethane provides better engine stability during acceleration and deceleration.
These bushes are to be installed in place of the original bushes

Anti-roll bar chassis side silentblock.

Compatible with Seat Ibiza type 6K from 1997 ->1999, from chassis 6K-V-143401->, for mounting with 20/21.5 mm anti-roll bar:
- 1.4 100hp (AFH)
- 1.6 100hp (AFT)
- 1.8 90hp (ACC, ADZ)
- 1.9 Diesel 64hp (1Y, AEY)
- 1.9 Turbo Diesel 75hp (AAZ)
- 1.9 TDi 90hp (1Z, AHU)
- 1.9 TDi 110hp (AFN)
- 1.9 TDi 110hp (AFN)
- 2.0 115hp (AGG)
- 2.0 16s 150hp (ABF)

Fits:
- Golf 1
- Jetta 1
- Scirocco 1

Mounted on the front suspension wishbones on the chassis side (1 silentbloc per wishbone).

Polyurethane-reinforced design for greater rigidity, responsiveness and front-end control.

Outside diameter: 45mm

ATTENTION: There are 2 different mountings. These silentblocs are designed for 45mm mounting only (not suitable for original equipment triangles with 33/36mm O.D. cylindrical silentblocs)!

Set of four POWERFLEX polyurethane silent blocks for a 10 mm steering rack for the VOLKSWAGEN Transporter T4 from 1993 to 2003 since chassis n° 70-P-004343->

Set of four POWERFLEX polyurethane silent blocks for the steering rack for a VOLKSWAGEN Transporter T25 from 1979 to 1992

Rear reaction link silentblocs for:
- 911 from 1969 to 1989
- 1969 912
- 930 from 1975 to 1989

Transaxle bush for all E46 models except M3

Set of 4 front lower linkage silentblocks for Mazda MX-5 NB and NBFL

For MX-5 NB and NBFL all models including sport chassis

Enables you to replace the silentblocks of your two front right and left lower linkages

2 silentblocks for the front linkage
2 silentblocks for the rear linkage

Kit for a vehicle
High quality adaptable parts

Bush and screw kit for fitting the anti-roll bar

To replace the original rubber and improve front axle guidance

For Audi 80 type 89, 8A:
(pas for automatic gearbox)
- 2.0 115hp (PS)
- 2.0 160hp (NM)
- 2.2 133hp (KV)
- 2.3 136hp (NG)
- 2.3 170hp (7A)

for 80 type 81:
- 1.9115hp (WN)
- 2.0 115hp (HP, JS, SK)
- 2.2 133hp (KV)
- 2.23 120hp(KX)

For Audi 80 type 8C:
- 1.9 TD 75hp (AAZ) up to chassis ->8C-P-053245
- 1.9 TDi 90hp (1Z) up to chassis ->8C-P-053245
- 2.3 133hp(NG) up to chassis ->8C-P-053245
- 2.6 139hp (ACZ) up to chassis->8C-N-190000
- 2.6 150hp (ABC) up to chassis ->8C-N-190000
- 2.8 174hp (AAH) up to chassis ->8C-N-190000

Set of 4 POWERFLEX rear upper linkage half-silentblocks for Mazda MX-5 NA

- Position 8 and 10 on the diagram (see photo)

Fits all Mazda MX-5 NA models

POWERFLEX silentblocks have the double advantage of being very easy to fit and being unbeatably reliable and high-performance. Harder than the original rubber, they give you even more precision and stability when the chassis is under stress. They have a longer life span and fitting them with half-silentblocks is much easier.

Silentbloc caoutchouc gauche ou droit sur barre de torsion pour Combi Split tous modèles de 1950 à 1967.
Pièce indispensable à la bonne tenue de route et au confort de conduite, un silentbloc de barre stabilisatrice en bon état préserve votre qualité et la précision de conduite.
Besoin de 4 pour un train arrière complet.
Vendu à l'unité.

Rear bush bracket for:
- 911 from 1978 to 1989
- 930 3.3
- 964
- 993