Silent blocks

POWERFLEX Black Series silentblocs front wishbone N°3 for Porsche 911 type 964 and 965 :

- 964 3.6 Carrera 2 and Carrera 4 from 1989 to 1994
- 964 3.6 Carrera 2 and Carrera 4 Turbo-Look Factory from 1991 to 1994
- 964 3.6 Carrera RS - 260 hp from 1992
- 964 3.3 Turbo - 320 hp from 1991 to 1992
- 965 3.6 Turbo - 360 hp from 1993 to 1994

These black polyurethane silent blocks replace the original ones. They are perfectly suited for track use. They are more resistant and more stiffer than POWERFLEX standard. They offer very precise undercarriage guidance and allow you to obtain the best of your Porsche. Ideal if you are looking for the best lap time !

The original bushes of the wishbone do not detail, the replacement by these POWERFLEX avoids you the replacement of the complete front wishbone.

Quantity needed per wishbone : 1 Kit

Silentbloc rubber/metal suspension arms on left or right upper front axle for BMW 5 series E39:

Sedan :
- 520i 2.0l 150hp phase 1 from 03/1995 to 07/1998 (engine code M52B20)
- 520i 2.0l 150hp phase 1 and 2 from 08/1998 to 11/2002 (engine code M52B20TU)
- 520i 2.2l 170hp phase 2 from 03/2000 to 07/2003 (engine code M54B22)
- 523i 170hp phase 1 from 02/1995 to 07/1998 (engine code M52B25)
- 523i 170hp phase 1 from 08/1998 to 08/2000 (engine code M52B25TU)
- 525i 192hp phase 1 and 2 from 11/1999 to 07/2003 (engine code M54B25)
- 528i 193hp phase 1 from 02/1995 to 07/1998 (engine code M52B28)
- 528i 193hp phase 1 from 08/1998 to 08/2000 (engine code M52B28TU)
- 530i 231hp phase 2 from 03/2000 to 07/2003 (engine code M54B30)
- 520d 4cyl 136hp phase 1 and 2 from 06/1999 to 07/2003 (engine code M47D20)
- 525d 163hp phase 1 and 2 from 06/1999 to 07/2003 (engine code M57D25)
- 525td 115hp phase 1 from 10/1996 to 02/2000 (engine code M51D25)
- 525tds 143hp phase 1 from 04/1995 to 03/2000 (engine code M51D25)
- 530d 184hp phase 1 and 2 from 12/1997 to 07/2003 (engine code M57D30)

Touring :
- 520i 2.0l 150hp phase 1 from 09/1996 to 07/1998 (engine code M52B20)
- 520i 2.0l 150hp phase 1 and 2 from 08/1998 to 07/2001 (engine code M52B20TU)
- 520i 2.2l 170hp phase 2 from 04/2000 to 12/2003 (engine code M54B20)
- 523i 170hp phase 1 from 09/1996 to 07/1998 (engine code M52B25)
- 523i 170hp phase 1 from 08/1998 to 08/2000 (engine code M52B25TU)
- 525i 192hp phase 1 and 2 from 11/1999 to 12/2003 (engine code M54B25)
- 528i 193hp phase 1 from 05/1996 to 07/1998 (engine code M52B28)
- 528i 193hp phase 1 from 08/1998 to 08/2000 (engine code M52B28TU)
- 530i 231hp phase 1 and 2 from 11/1999 to 12/2003 (engine code M54B30)
- 520d 4 cylinders 136hp phase 1 and 2 from 06/1999 to 09/2003 (engine code M47D20)
- 525d 163hp phase 1 and 2 from 06/1999 to 12/2003 (engine code M57D25)
- 525tds 143hp phase 1 from 05/1996 to 02/2000 (engine code M51D25)
- 530d 184hp phase 1 and 2 from 02/1998 to 12/2003 (engine code M57D30)

Length metal part: 60 mm
Overall length: 68 mm
Inside diameter: 12 mm
Total diameter: 58 mm

This product is sold individually.
Need 2 quantities per vehicle.

ATTENTION: This silentbloc is not suitable for the rear wishbone or for 535i, 540i and M5 versions!

Silentblock with 72 mm outer diameter.
Sold individually, 2 required for the rear axle

Compatible with Skoda Fabia type 6Y, please note that there are 2 different models possible, so check visually on the vehicle before ordering

Set of 2 heavy duty silentblocks located on the inside of the Mazda MX-5 NC et NCFL-s rear lower suspension arm

- Position 7 on the diagram (see photo)

Complete kit for left and right arms
Fits all Mazda NC and NCFL models

POWERFLEX silentblocks have the double advantage of being very easy to fit and being unbeatably reliable and high-performance. Harder than the original rubber, they give you even more precision and stability when the chassis is under stress. They have a longer life span and fitting them with half-silentblocks is much easier.

Set of 2 heavy duty silentblocks located on the front of the Mazda MRX-8 rear swingarm

- Position 5 on the diagram (see photo)

Complete kit for left and right arms
Fits all Mazda RX-8 models

POWERFLEX silentblocks have the double advantage of being very easy to fit and being unbeatably reliable and high-performance. Harder than the original rubber, they give you even more precision and stability when the chassis is under stress. They have a longer life span and fitting them with half-silentblocks is much easier.

Rear suspension arm silentbloc
Leftor right-hand side, sold per unit.
Position : outside the wishbone.

For VW Transporter T4 type 70/7D
All models 09/1990 ->06/2003
Including Syncro version (4 x 4).

Set of 2 heavy duty silentblocks located on the front part of the lower linkages of the front axle

- Position 1 on the diagram (see photo)

Kit for both linkages
Fits all Mazda RX-8 models

POWERFLEX silentblocks have the double advantage of being very easy to fit and being unbeatably reliable and high-performance. Harder than the original rubber, they give you even more precision and stability when the chassis is under stress. They have a longer life span and fitting them with half-silentblocks is much easier.

Left or right inner silentblock on chassis for 22 mm diameter anti-roll bar on VOLKSWAGEN Transporter T25/T3 from 05/1979 to 06/1984 up to chassis no. 24-E-145000 including Syncro version (4x4).
Load index: 1.4T

Silentbloc on rearaxle support for Bmw 6 Series:

- Compatible with all Bmw 6 Series E63 Coupé and E64 Cabriolet versions from 05/2002 to 07/2010 including M6 version engine code s85.

Need 4 quantities per vehicle.

Sold individually.

Set of 4 heavy duty silentblocks located on the front upper linkages on Mazda MX-5 NC and NCFL

- Position 3 on the diagram (see photo)

Complete kit for both upper left and right linkages
Fits all Mazda NC and NCFL models

POWERFLEX silentblocks have the double advantage of being very easy to fit and being unbeatably reliable and high-performance. Harder than the original rubber, they give you even more precision and stability when the chassis is under stress. They have a longer life span and fitting them with half-silentblocks is much easier.

For Audi 80 type 89, 8A :
- 1.4 65hp (SE)
- 1.6 Diesel 64hp (JK)
- 1.6 70/75hp (PP, RN)
- 1.6 Turbo Diesel Intercooler 80hp (RA, SB)
- 1.6 102hp (ABB)
- 1.8 75hp (RU)
- 1.8 88/90/93hp (SF, PM, JV, NE, JN)
- 1.8 112/113hp (DZ, SD)
- 1.9 Diesel 68hp (1Y)
- 2.0 112/115hp (3A, AAD)
- 2.0 137hp (6A)
_
For Audi 80 type 81 from 08/81-> :
- 1.3 55/60hp (ZA, FY, EP, FZ)
- 1.5 75hp (YJ)
- 1.6 Diesel 54hp (CR, JK)
- 1.6 Turbo Diesel 70hp (CY)
- 1.6 70/73/75hp (YT, YS, SA, DT, JU, WV, WY, YN)
- 1.6 85hp (YP)
- 1.6 100/110hp (XX, YZ)
- 1.8 88/90/93hp (SF, DS, JV, JN)
- 1.8 110/112hp (PV, DZ)
- 1.9 115hp (WN)
- 2.0 115hp (HP, JS) from 08/81 ->05/84

Suitable for:
- Polo 6N2
- Polo Classic 6V2 Saloon from 09/99->

Suitable for :
- Golf 2
- Golf 3
- Corrado
- Polo 6N
- Passat 3 from 04/88 -> 09/96

This "old assembly" silentbloc has a stop flange. The advantage of this is that the bolt axis is perfectly vertical to the triangle.

4 rear reaction link silentblocs for:
- 911 from 1969 to 1989

Used on the engine subframe, these bushes enable front fixing of the trailing arm (fitted on the suspension arm from the other side)

To replace the original rubber and improve front axle guidance
Easy to assemble thanks to 2-part design

For VOLKSWAGEN Transporter, 22 mm diameter rear sway bar.

Sway bars are available in several diameters, please measure the one on your vehicle before ordering.

Rear arm silentbloc for Porsche 911 and 912 from 1965 to 1989 :

->Porsche 912 :
- 912 1.6 from 1965 to 1969
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.0 from 1965 to 1968
- 911 2.0 T / L / E / Sfrom 1967to 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973
- 911 2.7 from 1974 to1977
- 911 2.7 S from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1989

Number required per vehicle : 4

Se vende por unidades

Sold per unit

Right bracket rod between anti-roll bar and shock absorber.

Suitable for Skoda Octavia type 1U including 4-wheel drive, if 18, 19 or 20 mm anti-roll bar is fitted

This silent front stabilizer block for Renault 4 (10/1961-12/1993) is faithful to the original.

This silent stabilizer block for R4, is compatible with all 4L models but also with many models of contemporary French production.

Compatible models:
- R4 type R1120 : 10/1961 to 09/1971
- R4 super type R1122 : 03/1962 to 09/1962
- R4 type R1123 : 12/1963 to 05/1986
- R4 super type R1124 : 09/1962 to 12/1963
- R4 GTL type R1128 : 01/1978 to 12/1993
- R4 Savane type R112C: 09/1986 to 12/1993

- R4 4CV van R2102: 10/1961 to 03/1966
- R4 4CV van type R2104: 02/1965 to 03/1966
- R4 4CV van R2105: 03/1966 to 09/1971
- R4 5HP van type R2106: 03/1966 to 05/1986
- R4 F4 van type R2391: 09/1972 to 05/1986
- R4 Elevated van type R2108: 10/1972 to 07/1975
- R4 Extended van F6 type R2370: 05/1975 to 11/1985
- R4 F6 Pick up type 3C2370: 07/1978 to 11/1985
- R4 Long glass van R2430: 05/1975 to 07/1978
- R4 F4 type R210B: 09/1981 to 05/1990
- R4 F4 station wagon type 239B: 09/1981 to 05/1990

Complete front suspension bumper kit :- 2 Upper bumpers- 2 Lower bumpers- 4 Mounting clips
For VW Combi Bay Window from 08/1967 to 07/1979All models.