Silent blocks

Silentblock upper front suspension arm left or right side of SUPERIOR QUALITY for VW Transporter T4 from 09/1990 to 06/2003
All models including Syncro version (4x4).

This pair of POWERFLEX rear stabilizer bar silentblocs is suitable for all MX5 ND with original or original-type bar:

- MX5 ND ST 1.5l and 2.0l from 05/2015 to present;
- MX5 ND RF 1.5l and 2.0l from 12/2016 to present.

Stabilizer-bar silentblocks ensure that the bar remains firmly in place, and their rigidity allows the bar to float to a greater or lesser extent. They are partly responsible for the sensations perceived by the rear axle driver.

Their polyurethane design offers greater rigidity and longer life than the original silentblocs.
They'll give your MX5 perfect stability and more incisive handling.

Sold in pairs.

Pair of Powerflex front wishbone silentblocks for Porsche 944 (1982-1985)
Fits the following models:
- 924 2.0 - 125 hp (XJ/XK) from 1979 to 1985- 924 2.5 S - 150 hp (M44.07/M44.08) from 1986 to 1987- 924 2.5 S - 160 hp (M44.09/M44.10) from 1988- 924 2.0 Turbo - 170 hp (M31.01) from 1979 to 1980- 924 2.0 Turbo - 177 hp (M31.03) from 1981 to 1985- 924 2.0 Carrera GT - 210 hp (M31.50) from 1981
- 944 phase 1 - 2.5 - 163hp (M44.01 to 04) from 1982 to 1985
One kit for both triangles

For E34 Saloon:
- 518 i M40/M43
- 520 i M20/M50
- 525 i M20/M50

For E34 Touring:
- 518 g/i M40/M43
- 520 i
- 525 i

Silentblock on rear wheel bearing housing for Audi A3 8P
Silentblock on wheel bearing cover for external mounting of lower cross arm, for Audi A3 8P all models
For left or right side.Sold individually.

For VOLKSWAGEN Transporter T6, 22 mm diameter rear sway bar.

Sway bars are available in several diameters, please measure the one on your vehicle before ordering.

Bearings with polyurethane silentblocks, allowing better guidance of the rear axle and an extended life span (number 30 on the diagram),

For Roadster (E85):
- 2.0 i N46
- 2.2 i M54
- 2.5 i M54
- 2.5 i N52
- 2.5 si N52
- 3.0 i M54
- 3.0 si N52
- M 3.2 S54

For Coupé (E86):
- M 3.2 S54

SSP rear axle bearing with silentbloc for Volkswagen Scirocco
For VW Scirocco all models from 1974 to 1992
This high-quality SSP rear axle support is protected from corrosion by an ultra-resistant powder coating, ensuring a long service life and safe driving with healthy rear axle behavior.
For left or right sideSold individually

These reinforced models located in front of the lower suspension arms of the rear axle (see number 5 on the diagram) offer a better guidance in support as well as an increased longevity compared to an original version,

For Audi A4 (B5) from 1994 to 2001:
- All models including "S4" and "RS4"

For Golf 5 and Golf 5 Plus
(including 4 Motion)

Rubber between front axle and upper frame head for VW Type 3.Suitable for left or right side.

These reinforced models located on the rear axle sway bar link rods (see No. 16 on the diagram) offer better guidance under pressure as well as greater durability compared with the original part

For E28:
- All models

MEYLE rear bearing housing silencer for Volkswagen Golf 6
Silentblock on wheel bearing housing for external fastening of lower cross-arm, for Golf 6 Sedan and Estate
For left or right sideSold individually
Original MEYLE quality

SASIC rear axle bumper for Peugeot 205 all models.

New original equipment quality part

Assignments:
- 1.0 GL, GE, XL, XE, Junior 954cm3 45hp (XV8) from 02/1983 to 07/1987
- 1.0 XL, GL, Junior 954cm3 45hp (TU9) from 08/1987 to 07/1992
- 1.0 XE, XR, Junior catalyzed 954cm3 50hp (TU9M/Z) from 08/1992 to 07/1995
- 1.1 GL, GR, XL, XR 1124cm3 50hp (XW7) from 02/1983 to 07/1987
- 1.1 GL, XL, GR, XR 1124cm3 55hp (TU1) from 08/1987 to 07/1992
- 1.1 XE, GE, XL, GL, XR, GR catalysed 1124cm3 60hp (TU1M/Z) from 08/1992 to 07/1995
- 1.3 Rallye 1294cm3 103hp (TU24) from 08/1987 to 07/1992
- 1.4 GR, SR, XR 1360cm3 60hp (XY7) from 02/1983 to 07/1987
- 1.4 GT, XT, XS 1360cm3 80hp (XY8) from 02/1983 to 07/1987
- 1.4 GR, SR, XR 1360cm3 65hp (TU3) from 08/1987 to 07/1988
- 1.4 GR, SR, XR 1360cm3 69hp (TU3A) from 08/1988 to 07/1990
- 1.4 GR, SR, XR 1360cm3 75hp (TU3F2) from 08/1990 to 07/1992
- 1.4 GR, SR, XR Catalyzed 1360cm3 75hp (TU3M/Z) from 08/1992 to 12/1998
- 1.4 GT, XS 1360cm3 85hp (TU3S) from 08/1987 to 07/1992
- 1.6 GT, XS 1580cm3 89hp (XU5M/Z) from 08/1992 to 07/1993
- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1985 to 07/1987
- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1987 to 07/1993
- 1.6 Automatic catalyzed 1580cm3 89hp (XU5M/Z) from 08/1993 to 08/1994
- 1.6 GTI 1580cm3 105hp (XU5J) from 03/1984 to 12/1986
- 1.6 GTI 1580cm3 115hp (XU5JA) from 03/1986 to 12/1986
- 1.6 GTI 1580cm3 115hp (XU5JA) from 01/1987 to 07/1992
- 1.8 GLD, GRD, SRD 1769cm3 60hp (XUD7) from 09/1983 to 07/1987
- 1.8 XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1984 to 07/1987
- 1.8 GLD, GRD, GTD, XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1987 to 12/1998
- 1.8 Dturbo 1769cm3 78hp (XUD7T) from 08/1990 to 12/1998
- 1.8 Turbo 16 1775cm3 200hp (XU8T) from 03/1984 to 12/1987
- 1.9 GTI 1905cm3 130hp (XU9JA) from 01/1987 to 07/1992
- 1.9 GTI Catalyzed 1905cm3 122hp (XU9JA/Z) from 08/1992 to 12/1993
- 1.9 Gentry 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1993

Cabriolet :
- 1.1 CJ 1124cm3 55hp (TU1) from 08/1987 to 07/1992
- 1.1 CJ Catalyzed 1124cm3 60hp (TU1M/Z) from 08/1992 to 07/1995
- 1.4 CT 1360cm3 80hp (XY8) from 07/1986 to 07/1987
- 1.4 CJ 1360cm3 65hp (TU3) from 08/1987 to 07/1988
- 1.4 CJ 1360cm3 69hp (TU3A) from 08/1988 to 07/1990
- 1.4 CJ 1360cm3 75hp (TU3F2) from 08/1990 to 07/1992
- 1.4 Cabriolet 1360cm3 75hp (TU3M/Z) from 08/1992 to 07/1995
- 1.6 CTI 1580cm3 115hp (XU5JA) from 08/1985 to 07/1990
- 1.9 CTI Catalyzed 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1993

These reinforced models located on the rear part of the front suspension arms (see number 1 on the diagram) offer a better guidance in support as well as an increased longevity compared to an original version

For Roadster (E85) and Coupé (E86):
- All models with 60mm diameter (except Z4 M)
Check your diameter because there is a 66mm assembly

Set of 4 front upper linkage silentblocks for Mazda MX-5 NA

For MX-5 NA all models

Enables you to replace the silentblocks of your two front right and left upper linkages

Kit for a vehicle
High quality adaptable parts

MEYLE rear cradle silencer for Mercedes SLK

For Mercedes SLK R170 all models :
- SLK 200 (170.435) from 09/1996 to 01/2000
- SLK 200 Kompressor (170.445) from 09/1996 to 01/2000
- SLK 200 Kompressor (170.444) from 02/2000 to 12/2004
- SLK 230 Kompressor (170.447) from 09/1996 to 01/2000
- SLK 230 Kompressor (170.449) from 02/2000 to 12/2004
- SLK 320 (170.465) from 02/2000 to 12/2004
- SLK 32 AMG (170.466) from 01/2001 to 12/2004

Located on left or right rear of cradle
See diagram

Original MEYLE quality
Sold individually

Rear axle frame silentbloc,
located on the left or right rear side of the axle.
For Mercedes C Class Type W202/S202,
Saloon and Estate

Front lower linkage silentblock set for Mercedes

For Mercedes 190 type W201 up to chassis number A675431 or F920107:

- 190 2.0 (201.022 and 201.023)
- 190D 2.0 (201.122)
- 190D 2.5 (201.126)
- 190E 1.8 (201.018)
- 190E 2.0 (201.024)

This kit allows you to replace the two silentblocks on the chassis side of your Mercedes 190 front lower linkage
Contains the two silentblocks, spacers and new nuts

Kit for one side, left or right
Not suitable for sport chassis

German Quality

Silentbloc for anti-roll bar
Diameter: 22.6 mm
Left or right-hand side, sold per unit.

For VW Transporter T4 type 70
09/1990 ->12/1995
up to chassis No. ->70-T-199 999.
Including Syncro version (4 x 4).