Stabilizer bar linkage

Stabilizer bar link on rear axle for Bmw 7 Series E32:

Bmw 7 Series E32 :

- 730i 6cyl 197hp from 07/1986 to 04/1994 (engine code m30b30)
- 730iL 6cyl 197hp from 12/1987 to 03/1994 (engine code m30b30)
- 730i 8cyl 218hp from 05/1991 to 04/1994 (engine code m60b30)
- 730iL 8cyl 218hp from 06/1992 to 03/1994 (engine code m60b30)
- 735i 6cyl 220hp from 10/1985 to 07/1992 (engine code m30b35)
- 735iL 6cyl 220hp from 06/1987 to 07/1992 (engine code m30b35)
- 740i 8cyl 286hp from 09/1991 to 03/1994 (engine code m60b40)
- 740iL 8cyl 286hp from 10/1991 to 03/1994 (engine code m60b40)
- 750i 12cyl 300hp from 07/1987 to 03/1994 (engine code m70)
- 750iL 12cyl 300hp 11/1986 to 03/1994 (engine code m70)
- 750iLS 12cyl 300hp from 09/1988 to 03/1994 (engine code m70)

Front stabilizer bar link for Bmw 7 Series E32:

Bmw Serie 7 E32 :

- 730i 6cyl 197hp from 07/1986 to 04/1994 (engine code m30b30)
- 730iL 6cyl 197hp from 12/1987 to 03/1994 (engine code m30b30)
- 730i 8cyl 218hp from 05/1991 to 04/1994 (engine code m60b30)
- 730iL 8cyl 218hp from 06/1992 to 03/1994 (engine code m60b30)
- 735i 6cyl 220hp from 10/1985 to 07/1992 (engine code m30b35)
- 735iL 6cyl 220hp from 06/1987 to 07/1992 (engine code m30b35)
- 750i 12cyl 300hp from 07/1987 to 03/1994 (engine code m70)
- 750iL 12cyl 300hp 11/1986 to 03/1994 (engine code m70)
- 750iLS 12cyl 300hp from 09/1988 to 03/1994 (engine code m70)

Not suitable for Bmw 7 Series E32 740i engine code m60b40.

Quantity required per vehicle: 2

This product is sold individually.

MEYLE HD front sway bar link for Bmw 7 Series E32:

Bmw 7 Series E32 :

- 730i 6cyl 197hp from 07/1986 to 04/1994 (engine code m30b30)
- 730iL 6cyl 197hp from 12/1987 to 03/1994 (engine code m30b30)
- 730i 8cyl 218hp from 05/1991 to 04/1994 (engine code m60b30)
- 730iL 8cyl 218hp from 06/1992 to 03/1994 (engine code m60b30)
- 735i 6cyl 220hp from 10/1985 to 07/1992 (engine code m30b35)
- 735iL 6cyl 220hp from 06/1987 to 07/1992 (engine code m30b35)
- 750i 12cyl 300hp from 07/1987 to 03/1994 (engine code m70)
- 750iL 12cyl 300hp 11/1986 to 03/1994 (engine code m70)
- 750iLS 12cyl 300hp from 09/1988 to 03/1994 (engine code m70)

Not suitable for Bmw 7 Series E32 740i engine code m60b40.

This front axle part offers optimized quality compared to the original, design defects are corrected, it is stronger for better durability and improved roadholding.

Quantity required per vehicle: 2

This product is sold individually.

Left or right-hand rod, sold individually.
Comes with nuts.

Compatible with Mercedes W123 Saloon, S123 Estate and C123 Coupe

Left front stabilizer bar link for VW LT from 1996 to 2006.
This stab bar link is suitable for all versions from LT28 to LT46, with or without camper van.

Suitable for :
- Golf 2 1.8 8s G60 160cv (PG)
- Corrado 1.8 8s G60 160cv (PG)

Rear stabilizer bar link for Porsche 924 from 1976 to 1981 :

- 924 2.0 - 125 hp (XJ/XK) from 1976 to 1985
- 924 2.5 S - 150 hp (M44.07/M44.08) from 1986 to 1987
- 924 2.5 S - 160 hp (M44.09/M44.10) from 1988
- 924 2.0 Turbo - 170 hp (M31.01) from 1979 to 1980
- 924 2.0 Turbo - 177 hp (M31.03) from 1981 to 1985
- 924 2.0 Carrera GT - 210 hp (M31.50) from 1981

The connecting rod is sold individually and is suitable for either the left or right side.

Rear stabilizer bar link for Porsche 968 from 1992 to 1995 :

- 968 3.0 - 240hp (M44.43/M44.44) from 1992 to 1995
- 968 Club Sport 3.0 - 240hp (M44.43) from 1993 to 1995

The connecting rod is sold individually and is suitable for either left or right side.

Front sway bar link for Bmw 6 Series:

Bmw E24 :

- 628 csi 184hp from 05/1982 to 05/1987 (engine code m30)
- 633 csi 200hp from 09/1982 to 12/1981 (engine code m30)
- 635 csi 218hp from 05/1982 to 04/1989 (engine code m30)
- M635csi 286hp from 10/1983 to 02/1989 (engine code s38)
- M6 260hp from 07/1986 to 09/1988 (engine code s38)

Sold individually.

Rear stabilizer bar link for Volkswagen Golf 6
For VW Golf 6 all models incl. 4Motion and Variant
Left or right side, sold individually

Rear stabilizer bar link for Porsche 944 from 1982 to 1991 :

- 944 phase 1 - 2.5 - 163hp (M44.01 to 04) from 1982 to 1985

- 944 phase 2 - 2.5 - 163hp (M44.05 to 08) from 1985 to 1987
- 944 phase 2 - 2.5 - 160hp (M44.09/M44.10) from 1988
- 944 phase 2 - 2.5 S - 190hp (M44.40) from 1987 to 1988
- 944 phase 2 - 2.7 - 165hp (M44.11/M44.12) from 1989
- 944 phase 2 - 3.0 S2 - 211hp (M44.41) from 1989 to 1991

- 944 phase 2 - 2.5 Turbo - 220hp (M44.50/M44.51) from 1986 to 1988
- 944 phase 2 - 2.5 Turbo S/Cup M578 - 250hp (M44.52) from 1988
- 944 phase 2 - 2.5 Turbo - 250hp (M44.52) from 1989 to 1991

The connecting rod is sold individually and is suitable for the left or right side.

MEYLE HD rear stabilizer bar link for Bmw 6 Series:

- Compatible with all Bmw 6 Series E63 and E64 models from 05/2002 to 07/2010 except version M6 engine code s85.

This linkage connects the active rear anti-roll bar (Dynamic Drive system) to the chassis. It is valid for the right-hand passenger side and the left-hand driver side.

Quantity required per vehicle: 2.

This product is sold individually.

Anti-roll bar link for Mazda MX-5 NC and NCFL

For NC and NCFL all models 2006-2015

Front left position (driver)

Fixing nuts included

MEYLE Left coupling rod of front and rear anti-roll bar for

Meyle rear right sway bar coupling rod for all Porsche 911 type 997 (Carrera 2, GTS, GT3, GT2 and Speedster) :

- 997 phase 1 3.6 - 325 hp (M96.05) Carrera and Carrera 4 from 2005 to 2008
- 997 phase 1 3.8 - 355 hp (M97.01) Carrera S and Carrera 4S from 2005 to 2008
- 997 phase 1 3.8 X51 - 380 hp (M97.01S) Carrera S and Carrera 4S from 2007 to 2008
- 997 phase 2 3.6 - 345 hp (MA 102) Carrera and Carrera 4 from 2009 to 2012
- 997 phase 2 3.8 - 385 hp (MA 101) Carrera S and Carrera 4S from 2009 to 2012
- 997 phase 2 3.8 X51 - 408 hp (MA 101) Carrera S and Carrera 4S from 2009 to 2012
- 997 3.8 - 408 hp (MA 101) Carrera GTS from 2011 to 2012
- 997 3.8 - 408 hp (MA 101) Carrera 4 GTS from 2012
- 997 3.6 Turbo - 480 hp (M97.70) from 2006 to 2009
- 997 3.8 Turbo - 500 hp (MA 170) from 2010 to 2013
- 997 3.8 Turbo S - 530 hp (MA 170) from 2010 to 2013
- 997 3.6 GT2 - 530 hp (M97.70S) from 2008 to 2009
- 997 3.6 GT2 RS - 620 hp (M97.70) of 2011
- 997 3.6 GT3 - 415 hp (M97.76) from 2007 to 2009
- 997 3.8 GT3 - 435 hp (M97.77) from 2010 to 2011
- 997 3.6 GT3 RS - 415 hp (M97.76) from 2007 to 2009
- 997 3.8 GT3 RS - 450 hp (M97.77R) from 2010 to 2011
- 997 4.0 GT3 RS - 500 hp (M97.74) of 2012

Length : 85 mm
Thread size 1 : M10 x 1.5
Thread size 2 : M10 x 1.5

Febi right rearstabilizer bar link for Bmw 3 Series:
- Compatible with all Bmw 3 Series F30 Sedan and F31 Touring versions from 02/2011 to 03/2019 including 4-wheel drive model type ix and xd.
Please note
- Not suitable for M3 F80 version.
- Need 2 rear sway bar links for 1 vehicle.
- Sold individually.

Adjustable RACING BEAT anti-roll bar links for Mazda MX5 NA

For NA all models
Sold in pairs, for front or rear

These ball joints designed by RACING BEAT are identical to the original tie rods for better handling in bends
Comes with screws and nuts that can be fitted instead of the original.
Equipped with urethane silentblocks for an unlimited lifespan

- Machined aluminium with urethane bumpers
- Adjustable from 97mm to 107mm
- Sold in pairs for a front or rear anti-roll bar
- Screws and bolts included

Compatible with the original bar, also a perfect complement to a Racing Beat tubular anti-roll bar!

FEBI Front anti-roll bar drop link for Porsche Cayenne 955 :

- 955 Cayenne V6 3.2 - 250 hp (M02.2Y) from 2003 to 2006
- 955 Cayenne S V8 4.5 - 340 hp (M48.00) from 2003 to 2006
- 955 Cayenne Turbo V8 4.5 - 450 hp (M48.50) from 2003 to 2006
- 955 Cayenne Turbo S V8 4.5 - 521 hp (M48.50) of 2006

Suitable for right and left sides.

Quantity needed per vehicle : 2

Sold individually

Adjustable RACING BEAT anti-roll bar links for Mazda MX5 NB and NBFL

For NB and NBFL all models

Tired of struggling with your BTR wrench to remove your old rusty rods?
These ball joints designed by RACING BEAT take the same very practical attachments seen in the NA tie rods and uses them for the NB and NBFL
They come with screws and nuts, so it-s easy to remove and fit them without any issues. They fit perfectly in place of the original.
Equipped with urethane silentblocks for an unlimited lifespan

- Machined aluminium with urethane bumpers
- Adjustable from 107mm to 117mm
- Sold in pairs for a front anti-roll bar
- Screws and bolts included

Compatible with the original bar, also a perfect complement to a Racing Beat tubular anti-roll bar!

Adjustable RACING BEAT anti-roll bar links for Mazda MX5 NB and NBFL

For NB and NBFL all models

Tired of struggling with your BTR wrench to remove your old rusty rods?
These ball joints designed by RACING BEAT take the NA tie rod design and use it for the NB and NBFL
They come with screws and nuts, so it-s easy to remove and fit them without any issues. They fit perfectly in place of the original.
Equipped with urethane silentblocks for an unlimited lifespan

- Machined aluminium with urethane bumpers
- Adjustable from 107mm to 117mm
- Sold in pairs for a rear anti-roll bar
- Screws and bolts included

Compatible with the original bar, also a perfect complement to a Racing Beat tubular anti-roll bar!