Stabilizer bar linkage

For Passat 3 saloon 04/88 -> 09/93:
- 1.8 107hp (PF)
-1.8 112hp (PB)
- 1.8 136hp (KR)
- 2.0 136hp (9A)

For Passat 3 estate 04/88 -> 09/93:
- 2.0 115hp (2E)
- 2.8 174hp (AAA)

For Passat 3 saloon or estate 10/93 -> 09/96:
- 1.6 100hp (AEK, AFT)
- 1.8 75hp (AAM)
- 1.8 90hp (ABS, ADZ)
- 1.9 turbo Diesel 75hp (AAZ)
- 1.9 TDI 90hp (1Z, AHU)
- 1.9 TDI 110hp (AFN)
- 2.0 106hp & 107hp (ACX & AEP)
- 2.0 115hp (2E, ADY, AGG)
- 2.0 150hp (ABF)
- 2.8174hp (AAA)

For Passat 3 Syncro versions 90 -> 96:
- 1.8 160hp (PG)
- 2.0 115hp (2E, ADY, AGG)
- 2.9 190 hp (ABV)

Biellette of stabilizer bar front left side driver or right side passenger for MINI III R55, R55LCI Clubmanand R56, R56LCI Sedan:

R55 Clubman:
- Cooper 1.6L 120hp from 10/2006 to 07/2010 (engine code N12B16)
- Cooper S 1.6L 175hp from 10/2006 to 07/2010 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 11/2007 to 07/2010 (engine code N14B16)
- Cooper d 1.6L 109hp from 11/2006 to 07/2010 (engine code W16D16)
- One 1.4L 95hp from 08/2008 to 02/2010 (engine code N12B14)

R55LCI Clubman :
- Cooper 1.6L 122hp from 03/2009 to 06/2014 (engine code N16B16)
- Cooper S 1.6L 184hp from 06/2009 to 06/2014 (engine code N18B16)
- Cooper S JCW 1.6L 211hp from 01/2010 to 06/2012 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 11/2011 to 06/2014 (engine code N18B16)
- Cooper SD 2.0L 143hp from 05/2009 to 06/2014 (engine code N47C20)
- Cooper D 1.6L 112hp from 04/2009 to 06/2014 (engine code N47C16)
- Cooper D 2.0L 112hp from 11/2010 to 06/2014 (engine code N47C20)
- One 1.6L 98hp from 03/2009 to 06/2014 (engine code N16B16)
- One D 1.6L 90hp from 01/2010 to 06/2014 (engine code N47C16)

R56 Sedan:
- Cooper 1.6L 120hp from 10/2005 to 08/2010 (engine code N12B16)
- Cooper S 1.6L 175hp from 11/2005 to 07/2010 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 11/2007 to 07/2010 (engine code N14B16)
- Cooper D 1.6L 109hp from 11/2005 to 07/2010 (engine code W16D16)
- One 1.4L 95hp from 12/2005 to 02/2010 (engine code N12B14)
- One D 1.6L 90hp from 06/2009 to 07/2010 (engine code W16D16)

R56LCI Sedan:
- Cooper 1.6L 122hp from 05/2009 to 11/2013 (engine code N16B16)
- Cooper S 1.6L 184hp from 07/2009 to 11/2013 (engine code N18B16)
- Cooper S JCW 1.6L 211hp from 01/2010 to 06/2012 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 11/2011 to 11/2013 (engine code N18B16)
- Cooper SD 2.0L 143hp from 06/2009 to 11/2013 (engine code N47C20)
- Cooper D 1.6L 112hp from 05/2009 to 11/2013 (engine code N47C16)
- Cooper D 2.0L 112hp from 08/2010 to 11/2013 (engine code N47C20)
- One D 1.6L 90hp from 05/2009 to 11/2013 (engine code N47C16)
- One 55kW 1.4L 75hp from 07/2009 to 11/2013 (engine code N12B14)
- One Eco 1.6L 98hp from 09/2009 to 11/2013 (engine code N16B16)
- One Eco 55kW 1.6L 75hp from 11/2009 to 11/2013 (engine code N16B16)

Dimensions:
- Length: 300 mm
- Thread: M10 x 1.5

Delivered with nuts.

This product is sold by the unit.

Connects the sway bar, for the driver side,

For E60 & E61:
- 525 xi N52
- 530 xd M57N2
- 530 xi N52

For E60 LCI & E61 LCI:
- 525 xd M57N2
- 525 xi N53
- 530 xd M57N2
- 530 xi N52N & N53

Short connecting rod between front stabilizer bar and wishbone.
Left or right side (sold individually)

Compatible with Volkswagen Golf 4 and Bora up to ->2001, up to chassis ->1J-1-480000, for mounting with 23 mm diameter stabilizer bar.

Suitable for :
- Golf 2 1.8 8s G60 160cv (PG)
- Corrado 1.8 8s G60 160cv (PG)

Front stabilizer bar rod for Porsche 944 phase 2 from 1985 to 1991 :
- 944 phase 2 - 2.5 - 163hp (M44.05 to 08) from 1985 to 1987- 944 phase 2 - 2.5 - 160hp (M44.09/M44.10) from 1988- 944 phase 2 - 2.5 S - 190hp (M44.40) from 1987 to 1988- 944 phase 2 - 2.7 - 165hp (M44.11/M44.12) from 1989- 944 phase 2 - 3.0 S2 - 211hp (M44.41) from 1989 to 1991
- 944 2.5 Turbo - 220hp (M44.50/M44.51) from 1986 to 1988- 944 2.5 Turbo S/Cup M578 - 250hp (M44.52) from 1988- 944 2.5 Turbo - 250hp (M44.52) from 1989 to 1991
2 quantities required per vehicle

Front left stabilizer bar rod for :
- MX5 NB and NBFL

For all A6 (C5) including Quattro, except Allroad

Rear right- or left-hand side
Sold by unit

For X5 E53:
- All models

Febi rear sway barlink for Bmw 3 Series :
Bmw 3 Series E36 Compact:
- 316i 4cyl 102hp from 06/1993 to 12/1998 (engine code M43B16)- 316i 4cyl 1.9L 105hp from 01/1999 to 07/2000 (engine code M43B19)- 318ti 4cyl 140hp from 08/1994 to 01/1996 (engine code M42B18)- 318ti 4cyl 1.9L 140hp from 01/1995 to 08/2000 (engine code M44B19)- 318tds 4cyl 1.7L 90hp from 03/1994 to 08/2000 (engine code M41D17)- 323ti 2.5L 170hp from 01/1997 to 08/2000 (engine code M52B25)
Need 2 connecting rods per vehicle.
Sold individually.

Anti-roll bar link for Mazda RX-8

For RX-8 all models from 2003 to 2012
Front left position

Nuts included

Meyle front right sway bar coupling rod for all Porsche 911 type 997 rear wheel drive (Carrera 2, GTS, GT3, GT2 and Speedster) :

- 997 phase 1 3.6 - 325 hp (M96.05) Carrera from 2005 to 2008
- 997 phase 1 3.8 - 355 hp (M97.01) Carrera S from 2005 to 2008
- 997 phase 1 3.8 X51 - 380 hp (M97.01S) Carrera S from 2007 to 2008
- 997 phase 2 3.6 - 345 hp (MA 102) Carrera from 2009 to 2012
- 997 phase 2 3.8 - 385 hp (MA 101) Carrera S from 2009 to 2012
- 997 phase 2 3.8 X51 - 408 hp (MA 101) Carrera S from 2009 to 2012
- 997 3.8 - 408 hp (MA 101) Carrera GTS from 2011 to 2012
- 997 3.6 GT2 - 530 hp (M97.70S) from 2008 to 2009
- 997 3.6 GT2 RS - 620 hp (M97.70) of 2011
- 997 3.6 GT3 - 415 hp (M97.76) from 2007 to 2009
- 997 3.8 GT3 - 435 hp (M97.77) from 2010 to 2011
- 997 3.6 GT3 RS - 415 hp (M97.76) from 2007 to 2009
- 997 3.8 GT3 RS - 450 hp (M97.77R) from 2010 to 2011
- 997 4.0 GT3 RS - 500 hp (M97.74) of 2012

Length : 200 mm
Thread size 1 : M12 x 1.5
Thread size 2 : M10 x 1.5

LH or RH support con rod on front stabiliser bar and strut

Suitable for:
- A6 (C5) including Quattro
- A4 (B5) from chassis 8D-W-290 001->
- Passat 4 1997->

For VOLKSWAGEN Transporter T6 all models, all engines.
Meyle HD reinforced model

Rear stabilizer bar link for BMW X3 E83 and LCI :

- Compatible with all petrol and diesel models from 01/2003 to 08/2010

Suitable for both rear sides

Meylerear stabilizer link for Mercedes SL and SLC R107 all models
Meyle Original quality
Suspension link for rear suspension.
Fits all SL and SLC R107 models
Left or right side compatible

Connects the sway bar, for the driver side,

For E60 & E61:
- All models, including M5
(except 4-wheel drive: xd and xi)

For E60 LCI & E61 LCI:
- All models, including M5
(except 4-wheel drive: xd and xi)

Rear stabilizer bar link for Porsche 924 from 1976 to 1981 :

- 924 2.0 - 125 hp (XJ/XK) from 1976 to 1985
- 924 2.5 S - 150 hp (M44.07/M44.08) from 1986 to 1987
- 924 2.5 S - 160 hp (M44.09/M44.10) from 1988
- 924 2.0 Turbo - 170 hp (M31.01) from 1979 to 1980
- 924 2.0 Turbo - 177 hp (M31.03) from 1981 to 1985
- 924 2.0 Carrera GT - 210 hp (M31.50) from 1981

The connecting rod is sold individually and is suitable for either the left or right side.