Shock absorbers

Set of 4 BOGE / SACHS oil shock absorbersOriginal German quality+ 2 shock absorber heads.
For VW Beetle 1200 / 1300 / 1500 since 08/1965 and chassis since N° 116 000 001

"B6 SPORT" hard-calibration rear gas shock absorber
BILSTEIN brand superior quality
Firmer road holding and improved longevity.
Height: original or moderate lowering
Mounting: eye-eye 12 mm
Dimensions: 41 mm
Under compression : 28 mm

For Beetle & Karmann-Ghia Type 14, 1200, 1300, 1500
all years with rear axle with flared tubes from 12/1952->
(except universal joint, automatic gearbox, 1302 and 1303 versions).

"B6 SPORT"front gas monotube shock absorber.
BILSTEIN brand superior quality
Tighter handling and improved lifespan.
Height: as in original or slightly lowered
Fixing: eyelet - eyelet

For VW Beetle & Karmann-Ghia Type 14,
Models: 1200, 1300
With front pivot suspension
Years: 12/1952 ->07/1965
Chassis: up to no. ->115 999 000 / ->145 999 000.

Quality BILSTEIN, range GAZ tared hard B6 SPORT
Interior diameter fixing = 12 mm

B6 SPORT Hard shock absorber calibration
Superior quality BILSTEIN brand
Firmer road-holding and more durable.
Height: original or moderately lowered
Mounting: front or rear
Fastening: eye-eye

For Combi Split all models, 1950 ->07/1967

Kit of 4 genuine MEYLE shock absorbers for Volkswagen Golf 4 Sedan, Bora and New Beetle
Suitable for :- VW Golf 4 Sedan and Bora all models including Golf 4 GTIExcept Estate and 4Motion.- VW New Beetle Sedan and Convertible all modelstypes 9C1, 1C1 and 1Y7 ->10/05, except RSi.
Kit includes 2 front struts and 2 rear shock absorbers in original MEYLE quality.For standard chassis only

BILSTEIN B4 rear shock absorber for Porsche Boxster type 986 :

- 986 2.5 Boxster - 204 hp (M96.20) from 1997 to 1999
- 986 2.7 Boxster - 220 hp (M96.22) from 2000 to 2002
- 986 2.7 Boxster - 228 hp (M96.23) from 2003 to 2004
- 986 3.2 Boxster S - 252 hp (M96.21) from 2000 to 2002
- 986 3.2 Boxster S - 260 hp (M96.24) from 2003 to 2004
- 986 3.2 Boxster S550 - 266 hp (M96.24) from 2003 to 2004

Suitable for right and left sides

The BILSTEIN B4 is ideal as a replacement for your original shock absorber. You will get road handling on your Porsche Boxster 986 as when it left the factory.

Sold individually

Set of 4 COFAP front gas shock absorbers.
for MacPherson front axle on 2-point mounted support strut version (spindle strut not supplied) and rear axle with universal joints.

For VW Beetle 1303
all versions from 08/1973->
Chassis:
- Hatchback from no. 134 2000 001->
- Cabriolet from no.154 2000 001->

Bilstein B6 gas pressure rear shock absorber for BMW 02 E10 series from 1966 to 1977 :

- 1502 to 2002 Tii

The BILSTEIN B6 is an ideal gas pressure shock absorber for those who refuse to compromise on performance or comfort.

Sold individually

"Gas-a-Just" hard calibration front shock absorber
KAYABA brand superior quality
Firmer road holding and improved longevity.
Height: original or moderate lowering
Fitting: Eye - Rod

For Beetle & Karmann-Ghia Type 14, from 08/1965->
Hatchback, Cabriolet, 1200, 1300, 1500 versions
with front axle with ball joints (except 1302 & 1303).
Chassis from no. 116 000 001->/146 000 001->/ 156 000 001->

Ensemble de 4 amortisseurs à bain d'huile pour Coccinelles 1302 et 1303 de première génération, avec un pied de jambe de force triangulaire (fixation de la rotule inférieur de suspension).
Point repère supplémentaire pour les 1303 : celles équipées d'un boîtier de direction (pas d'une crémaillère)

Le kit se compose de 2 inserts pour monter sur les jambes de forces avant et de deux amortisseurs arrière oeil/oeil pour train à cardans.

Bilstein B4 front shock absorber for Porsche 911 type 996 2-wheel drive :

- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera from 1998 to 2001
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera from 2002 to 2005

Standard chassis

Sold individually

For all Transporter T25 from 05/79 to 90, except syncro (4x4)
Hydraulic damper, excellent value for money!
Sold individually

The BILSTEIN yellow B8 is produced using B6 technology, fitted with a short rod, for improved clearance when assembled with short springs.

shock absorber supplied individually for 1 side.

An oil-filled rear shock absorber is a crucial component of the suspension system. It is designed to absorb the shocks and vibrations that occur when the vehicle is driven over uneven surfaces. The main role of a shock absorber is to control suspension movement, providing comfort and stability while driving.
Shock absorbers generally use a fluid, such as oil, to control the oscillation of the suspension spring after the vehicle has passed over an obstacle (such as a pothole or bump).
When the vehicle goes over a bump, the suspension spring compresses to absorb the impact.The shock absorber controls the rate at which the spring compresses and decompresses. The oil inside the shock absorber is pressurized and forced through orifices or valves. This generates resistance, which dissipates kinetic energy into heat.When a wheel lifts after overcoming a road irregularity, the shock absorber also controls rebound by regulating the oil pressure in the cylinder. This prevents the suspension from bouncing excessively, ensuring a stable ride.
If the shock absorber is defective, the car may become more difficult to control, particularly when cornering or on rough roads.Faulty shock absorbers can result in poor contact with the road, leading to uneven tire wear.A damaged shock absorber may produce slamming or squealing noises, especially when driving on uneven surfaces.If the shock absorber is worn, it won't be able to control the vehicle's movements properly, which can make driving bumpier.
Oil-filled rear shock absorbers are therefore essential to the safety and comfort of your Combi. They play a key role in controlling the vehicle's movements and ensuring a smooth, stable ride. If you notice any signs of weakness or wear, it's best to have them examined and replaced by a professional.

Original oil-filled rear shock absorber in original BOGE or SACHS quality (depending on availability)Height: original or slightly lowerMounting: eye-eye 12mm, width 32 mmDeflection: 350 mm - 585 mmMounting : Left or right rear.Sold individually.
Suitable for VW Combi Bay Window all models from 08/1971 to 07/1979 and chassis no. 212 2000 001 to 219 2153 964.

For E21 with standard and Sport chassis:
- 315
- 316
- 318 and 318 i
- 320 and320 i
- 323 i

KYB "Excel-G" gas shock absorberTop quality KAYABA brandHeight: original or moderate loweringLonger life and improved ride comfortMounting: front + rearMounting: eye-to-eye 12 mm
For VW Beetle and Karmann-Ghia Type 14 from 12/1952 to 07/1965 models with pivoting front axle up to chassis No. 115 999 000 or No. 145 999 000.

KONI Sport rear shock absorber for Porsche :

-> Porsche 924 :
- 924 2.5 S - 150 hp from 1986 to 1987
- 924 2.5 S - 160 hp of 1988

-> Porsche 944 phase 2 :
- 944 2.5 - 163 hp from 1985 to 1987
- 944 2.5 - 160 hp from 1988
- 944 2.5 S - 190 hp from 1987 to 1988
- 944 2.7 - 165 hp from 1989
- 944 2.5 Turbo 220 hp from 1986 to 1988
- 944 2.5 Turbo S / Cup 250 hp from 1988
- 944 2.5 Turbo 250 hp from 1989 to 1991
- 944 3.0 S2 - 211 hp from 1989 to 1991

-> Porsche 968 :
- 968 3.0 from 1992 to 1995
except option M030 (sports chassis)

Rebound adjustable without dismantling.

KONI Classic shock absorber for:
- 911 from 1965 to 1968
- 912 from 1966 to 1968

Is mounted in the Boge strut.

Modern technology and classic look.

Rebound adjustable.

Hydraulic damper original type
Sold individually.

For Kombi Bay Window 08/1971 ->07/1979
Chassis N° 212 2000 001 ->219 2153 964.