Shock absorber stop

Left or right bump stop 63 mm, sold individually.
Suitable for:
Golf 3 Berline & Vento including Syncro(4x4)
from 08/94 ->98 (chassis n° SW-062 539-> or SB-019 476->)
except 2.0 8S / 16S, 2.8 / 2.9 VR6 & Cabriolet

For A3 (8L):
- All models including Quattro (4x4)
except Sport chassis (-20mm)

Stop on front shock absorber rod.
Length: 63 mm
Sold individually

Compatible with Volkswagen New Beetle:
- Convertible type 1Y with suspension code PR-G50, G54 or G74
- Saloon type 1C/9C Saloon with suspension code PR-1GB, G50
- Saloon type 1C/9C Saloon since 06/2001-> with suspension code PR-G18, G54, G59, G74

Stop on front shock absorber rod.
Length: 63 mm
Sold individually

Compatible with Seat Leon type 1M standard chassis.

Left or right bump stop 63 mm, sold individually.
Suitable for Polo 6N1 all models 09/94 ->09/99

Left or right bumpstop 63 mm, sold individually.
Suitable for:

- Golf 4 & Bora, Berline & Break including 4-Motion (4x4)
98 ->04 (2.3 V5 until ->04/00 chassis n° ->y-360 000)
except VR6 & chassis Sport (-20 mm) & Cabriolet

For TT (8N):
- All models including Quattro (4x4) 99 ->03
except Sport chassis (-20mm)

Suitable for :
- E36 all except M3 & chassis sport
- E46 all except M3 et chassis sport

For E28:
- 518 and 518i
- 520 i
- 524 d / td
- 525 e / i
- 528 i 

For E34 Saloon:
- All models, except 525 ix and M5 3.6 / 3.8

For E39 Saloon:
- 520 i M52. 523 i, 528 i up to ->10/95
- 535 i and 540 i

For E39 Touring:
- All models, except 540 i

For E30 Cabriolet:
- 318 i, 320 i, 325 i

For E30 2-door Saloon:
- All versions, except 318 isand M3 

For E30 Touring:
- All models

For E36 Cabriolet:
- 318 i
- 320 i M50 / M52
- 323i, 325 i, 328 i 

For E36Compact:
- All models

For E36 Coupé:
- 316 i, 318 is M42 / M44
- 320 i M50
- 320 i M52. 323 i, 328 i from 06/92->
- 325 i 

For E36 Saloon:
- 316 i and 318 i M40 / M43 
- 318 is M42 / M44
- 318 tds
- 320 i M50 
- 320i M52. 323 i, 328i from 06/92-> 
- 325 i
- 325 td
- 325 tds from 06/92->

For all E28 models

Front shock absorber bumper for Bmw 6 Series:

Bmw E24 :

- 628 csi 184hp from 05/1982 to 05/1987 (engine code m30)
- 635 csi 218hp from 05/1982 to 04/1989 (engine code m30)
- M6 260hp from 07/1986 to 09/1988 (engine code s38)

Sold individually.

FEBI rear bumpers and dust cover kit for Volkswagen Touran 1
For VW Touran 1T1 and 1T2 all models without electronic suspension
Original FEBI Bilstein quality

Front shock absorber bumper for Porsche 944 from 1987 to 1991 :

- 944 phase 2 - 2.5 - 163hp (M44.05 to 08) from 1987
- 944 phase 2 - 2.5 - 160hp (M44.09/M44.10) from 1988
- 944 phase 2 - 2.5 S - 190hp (M44.40) from 1987 to 1988
- 944 phase 2 - 2.7 - 165hp (M44.11/M44.12) from 1989
- 944 phase 2 - 3.0 S2 - 211hp (M44.41) from 1989 to 1991

- 944 phase 2 - 2.5 Turbo - 220hp (M44.50/M44.51) from 1987 to 1988
- 944 phase 2 - 2.5 Turbo S/Cup M578 - 250hp (M44.52) from 1988
- 944 phase 2 - 2.5 Turbo - 250hp (M44.52) from 1989 to 1991

The bump stop is sold individually. Two quantities are required for the front axle.

Rear shock absorber bumper for Porsche 911 type 964 from 1989 to 1990 :

- 964 3.6 - 250hp (M64.01/02) Carrera 2 from 1990
- 964 3.6 - 250hp (M64.01) Carrera 4 from 1989 to 1990

The stop is sold individually , and two quantities are required per vehicle.

Rear shock absorber rod stop
Length: 105 mm
Sold individually

Compatible with Seat Leon type 1M with sport chassis

Suitable for:
- Polo 9N1
- Polo 9N3

Suitable for:
- all Polo 6N2
- Polo 9N1 and 9N3 with standard chassis

Shock absorber pad for:
- Mini John Cooper Works
- R50 Cooper Coupé
- R50 One 1.6 i Coupé
- R53 Cooper S Coupé

Shock absorber kit for Mazda MX5 NC and NCFL

For NC and NCFL all models
Suitable for front and rear

Attachment kit containing everything you need to replace the rubber bumpers of your front or rear shock absorber

Contains:

- The upper cup - F151-28-774
- The thrust spacer - F151-28-773
- The upper bearing stop - F151-28-775A
- The lower bearing stop - F151-28-776

See diagram
Kit for a shock absorber

The shock absorber stop is a part used in vehicle suspension systems. Its main function is to limit the movement of the shock absorber when it reaches its maximum stroke, i.e. when it is fully compressed. This prevents damage to the part, while providing a form of protection and additional comfort during impacts.The main functions of the shock absorber stop are :
Protection of internal components: When the shock absorber is fully compressed, the stop prevents internal parts from colliding with each other, which could lead to damage.Shock reduction: The shock absorber helps to absorb the last shocks when the shock absorber reaches the end of its stroke, thus avoiding sudden vibrations that could affect vehicle stability.Comfort: It also enhances driving comfort, by reducing noise and jolts during extreme suspension movements.
Sold individually, it is suitable for VW Transporter T25 / T3 from 05/1979 to 07/1992, and especially for models that have been lowered by up to -30mm.