Shock absorber bearing

Suspension bearing, located above the front shock absorber/spring assembly.
Rubber only, comes without the bearing.
For left or right-hand side, sold individually.

Compatible with Seat Leon type 1M all models

Suspension bearing on left or front right shock absorber.

Compatible with Skoda Octavia type 1Z all models

For Polo 6N2
- All models

For Polo Classic 6V2
- All models from 09/99->

For Polo 9N1:
- All models with standard chassis

For Polo 9N3 with standard chassis:
- 1.2 54hp and 60hp (BMD, BBM)
- 1.2 64hp and 70hp (BME, BZG)
- 1.4 TDi 68hp, 70hp and 80hp (BNM, BWB, BMS, BNV)
- 1.4 75hp, 80hp and 85hp (BKY, BUD, AXU)
- 1.4 100hp (BBZ)
- 1.6 105hp (BTS)
- 1.9 SDi 64hp (ASY)
- 1.9 TDi 100/101hp (BMT, ATD, AXR)
- 1.9 TDi 130hp (ASZ, BLT)

Upper front shock absorber support ring for Porsche 911 type 996 Carrera 2 from 1998 to 2005 :

- 996 phase 1 3.4 Carrera from 1998 to 2001
- 996 phase 2 3.6 Carrera from 2002 to 2005

The support ring is sold individually and two quantities are required per vehicle.

Spring plate for Bmw 6 Series :
Bmw 6 Series E24:
- 628 csi 184hp from 05/1982 to 05/1987 (engine code m30)- 635 csi 218hp from 12/1977 to 04/1989 (engine code m30)- M635 csi 286hp from 10/1983 to 02/1989 (engine code s38)- M6 260hp from 07/1986 to 09/1988 (engine code s38)
Warning! Not suitable for Bmw 6 Series E24 Phase 1.
Need 2 trays for 1 vehicle.
Sold individually.

Bearings with polyurethane silentblocks, allowing better guidance of the rear axle and an extended life span (number 30 on the diagram),

For Roadster (E85):
- 2.0 i N46
- 2.2 i M54
- 2.5 i M54
- 2.5 i N52
- 2.5 si N52
- 3.0 i M54
- 3.0 si N52
- M 3.2 S54

For Coupé (E86):
- M 3.2 S54

Front suspension strut bearing for Porsche 911 Type 997 with 4 wheel drive :

- 997 phase 1 3.6 - 325 hp (M96.05) Carrera 4 from 2005 to 2008
- 997 phase 1 3.8 - 355 hp (M97.01) Carrera 4S from 2005 to 2008
- 997 phase 1 3.8 X51 - 380 hp (M97.01S) Carrera 4S from 2007 to 2008
- 997 phase 2 3.6 - 345 hp (MA 102) Carrera 4 from 2009 to 2012
- 997 phase 2 3.8 - 385 hp (MA 101) Carrera 4S from 2009 to 2012
- 997 phase 2 3.8 X51 - 408 hp (MA 101) Carrera 4S from 2009 to 2012
- 997 3.8 - 408 hp (MA 101) Carrera 4 GTS of 2012
- 997 3.6 Turbo - 480 hp (M97.70) from 2006 to 2009
- 997 3.8 Turbo - 500 hp (MA 170) from 2010 to 2013
- 997 3.8 Turbo S - 530 hp (MA 170) from 2010 to 2013

Suitable for right and left sides

Porsche origin

Sold individually

Suspension bearing for left or front right shock absorber, comes on its own without a ball bearing.

Compatible with Seat Ibiza type 6K, all models from 03/1999->

Bearing located on the rear shock absorber,

For E90, E91, E92 & E93:
- All models (including xi, xd and M3)

For E90 LCI, E91 LCI, E92 LCI & E93 LCI:
- All models (including xi, xd and M3)

Front suspension bearing for VW Transporter T5 from 2009 to 2015 from chassis n°WV1ZZZ7HZ9-000001.

Front suspension bearing for:
- 993 all models excluding RS

For X5 E53:
- 3.0d M57 & M57N
- 3.0i M54
- 4.4i M62 & N62
- 4.6is M62

MEYLE front suspension strut bearing for Porsche Boxster 986 :

- 986 2.5 Boxster - 204 hp (M96.20) from 1997 to 1999
- 986 2.7 Boxster - 220 hp (M96.22) from 2000 to 2002
- 986 2.7 Boxster - 228 hp (M96.23) from 2003 to 2004
- 986 3.2 Boxster S - 252 hp (M96.21) from 2000 to 2002
- 986 3.2 Boxster S - 260 hp (M96.24) from 2003 to 2004
- 986 3.2 Boxster S550 - 266 hp (M96.24) from 2003 to 2004

Suitable for right and left sides

Sold individually

Upper front shock absorber support ring for Porsche 911 type 997 Carrera 2, 2S and 2GTS from 2005 to 2012 :

- 997 phase 1 3.6 Carrera 2 from 2005 to 2008
- 997 phase 1 3.8 Carrera S from 2005 to 2008

- 997 phase 2 3.6 Carrera 2 from 2009 to 2012
- 997 phase 2 3.8 Carrera S from 2009 to 2012

- 997 3.8 Carrera GTS from 2011 to 2012

The support ring is sold individually and two quantities are required per vehicle.

For Passat 4 (3B2, 3B5):
- 1.6 100hp (ADP, AHL, ANA, ARM)
- 1.8 115hp and 125hp (AFY, ADR, APT, ARG)
- 1.8 150hp (AEB, ANB, APU)
- 1.9 TDi 90hp and 100hp (AHH, AHU, AVB)
- 1.9 TDi 110hp (AFN, AVG)
- 1.9 TDi 115hp (AJM, ATJ)
- 2.5 TDi 150hp (AFB, AKN)
- 2.6 150hp (AGZ)
- 2.8 180hp and 190hp (AGE, ATX)
- 2.8 193hp (ACK, APR, AQD)

For Passat 5 (3B3) saloon only:
- All up to chassis ->3B-1-300000

For all A6 (C5) versions and Audi 100 S4

Suspension bearing for left or front right shock absorber, comes on its own without a ball bearing.

Compatible with Seat Ibiza type 6L with standard chassis:
- 1.2 64hp (BME)
- 1.4 TDi 70hp (BNM)
- 1.4 TDi 80hp (BNV)
- 1.4 75hp (BBY, BKY)
- 1.4 100hp (BBZ)
- 1.6 100hp (BAH)
- 1.9 TDi 130hp (BLT)
- 2.0 115hp (BBX)

Located above the upper cup,

For E90 & E91:
- 316 i N43, N45 & N45N (E90 only)
- 318 d M47N2 & N47
- 318 i N43, N46 & N46N
- 320 d M47N2 & N47
- 320 i N43, N46 & N46N
- 323 i N52 & N52N
- 325 d M57N2
- 325 i N52, N52N & N53
- 328 i N51 (E90 only)
- 330 d M57N2
- 330 i N52, N52N & N53
- 335 d M57N2
- 335 i N54

Suspension strut mounting, located above the front shock absorber/spring assembly.
Rubber only, bearing not included.
For left or right side, sold individually.

Compatible with Audi TT type 8N, all models

Single bearing on front shock absorber rod, in combination with suspension flange/bearing (not supplied)

Compatible with Seat Ibiza type 6K from 1994-> 1999:
- 1.0 50hp (AER)
- 1.1 45hp (AAU) from chassis 6K-TR080001->
- 1.4 54hp (ANX)
- 1.4 60hp (ABD, AEX) from chassis 6K-TR080001->
- 1.4 60hp (AKV, APQ)
- 1.4 100hp (AFH)
- 1.6 75hp (AEE, ALM)
- 1.6 75hp (1F) from chassis 6K-TR080001->
- 1.6 100hp (AFT) from chassis 6K-TR080001->
- 1.8 90hp (ADZ) from chassis 6K-TR080001->
- 1.8 90hp (ACC)
- 1.8 16s 129hp (ADL) from chassis 6K-ZR082401-> or 6K-ZR599965->
- 1.9 Diesel 64hp (1Y, AEY) from chassis 6K-TR080001->
- 1.9 Turbo Diesel 75hp (AAZ) from chassis 6K-TR080001->
- 1.9 TDi 90hp (1Z, AHU)
- 1.9 TDi 110hp (AFN)
- 2.0 115hp (2E) from chassis 6K-ZR082401-> or 6K-ZR599965->
- 2.0 115hp (AGG)
- 2.0 16s 150hp (ABF)

Sold individually