Shock absorber bearing

Rear upper suspension bearing for Bmw 7 Series:

Bmw E65 :

- 730i 6 cyl 231hp from 07/2002 to 02/2005 (engine code m54b30)
- 735i 8 cyl 272hp from 03/2000 to 02/2005 (engine code n62b36a)
- 745i 8 cyl 333hp from 03/2000 to 02/2005 (engine code n62b44a)
- 750i 8 cyl 367hp from 06/2004 to 07/2008 (engine code n62b48b)
- Alpina B7 8 cyl 500hp from 03/2006 to 01/2008 (engine code n62)
- 730d 6 cyl 231hp from 02/2005 to 07/2008 (engine code m57d30tu2)
- 740d 8 cyl 258hp from 11/2001 to 02/2005 (engine code m67d40)

Bmw E66 :

- 730Li 6 cyl 231hp from 07/2002 to 02/2005 (engine code m54b30)
- 730Li 6 cyl 258hp from 07/2004 to 07/2008 (engine code n52d30a)
- 735Li 8 cyl 272hp from 06/2000 to 02/2005 (engine code n62b36a)
- 740Li 8 cyl 326hp from 09/2004 to 07/2008 (engine code n62b40a)
- 745Li 8 cyl 333hp from 06/2000 to 02/2005 (engine code n62b44a)
- 750Li 8 cyl 367hp from 06/2004 to 07/2008 (engine code n62b48b)
- 730Ld 6 cyl 231hp from 03/2005 to 07/2008 (engine code m57d30tu2)

Bearing located at the top of therear shock absorber.

Must be replaced in pairs.

Sold individually.

Roulement du palier caoutchouc de suspension avant.
Pour côté gauche ou droit, vendu à l'unité

Compatible pour Volkswagen Corrado :
- 2.0 8s 115cv (2E, ADY) depuis 1995->, à partir du châssis ..-S-000052->
- 2.0 16s 136cv (9A) depuis 1995->, à partir du châssis ..-S-000052->
- 2.9 VR6 190cv (ABV) depuis 1992->, à partir du châssis ..-N-000001->

Suitable for vehicles with big cups 110 mm :
- Golf 2 & Jetta 2 1.8 G60 (PG)
- Golf Rallye 1.8 G60 (1H)

Front suspension rubber bearing.
For left or right-hand side, sold individually

Compatible with Volkswagen Passat type 35i:
- 2.8 and 2.9 VR6 174hp and 190hp (AAA, ABV) all years
- Other engines from 1993->, from chassis 31-P-026436->

Rearupper shock absorber cup for Bmw 6 Series:
Bmw 6 Series E24:
- 628 csi 184hp from 05/1982 to 05/1987 (engine code m30)- 635 csi 218hp from 05/1982 to 04/1989 (engine code m30)
Warning! Not suitable for other 6-cylinder petrol versions.
Sold individually.

Suspension bearing flange on front shock absorber.

Comes on its own without a bearing (to be ordered separately)

Compatible with Seat Ibiza type 6K from 1994 ->1999:
- 1.0 50hp (AER)
- 1.1 45hp (AAU) from chassis 6K-TR080001->
- 1.4 54hp (ANX)
- 1.4 60hp (ABD, AEX) from chassis 6K-TR080001->
- 1.4 60hp (AKV, APQ)
- 1.4 100hp (AFH)
- 1.6 75hp (AEE, ALM)
- 1.6 75hp (1F) from chassis 6K-TR080001->
- 1.6 100hp (AFT) from chassis 6K-TR080001->
- 1.8 90hp (ADZ) from chassis 6K-TR080001->
- 1.8 90hp (ACC)
- 1.8 16s 129hp (ADL) from chassis 6K-ZR082401-> or 6K-ZR599965->
- 1.9 Diesel 64hp (1Y, AEY) from chassis 6K-TR080001->
- 1.9 Turbo Diesel 75hp (AAZ) from chassis 6K-TR080001->
- 1.9 TDi 90hp (1Z, AHU)
- 1.9 TDi 110hp (AFN)
- 2.0 115hp (2E) from chassis 6K-ZR082401-> or 6K-ZR599965->
- 2.0 115hp (AGG)
- 2.0 16s 150hp (ABF)

Suspension bearing for MX5 NA

- Suitable for front and rear
- Change if it starts getting old and worn or when changing the shock absorbers
- Sold individually
- Original MAZDA part

Located above the upper cup,

For E92 LCI:
- 316 i N43
- 318 i N43
- 320 d N47N
- 320 i N43 & N46N
- 323 i N52N
- 325 d N57
- 325 i N52N & N53
- 330 d N57
- 330 i N52N & N53
- 335 d M57N2
- 335 i N55

For E93 LCI:
- 318 i N43
- 320 d N47N
- 320 i N43 & N46N
- 323 i N52N
- 325 d N57
- 325 i N52N & N53
- 330 d N57
- 330 i N52N & N53
- 335 d M57N2
- 335 i N55

Spring plate for Bmw z1 E30 :
Bmw z1 E30 Roadster :
- 2.5i 6cyl 170hp from 07/1988 to 06/1991 (engine code m20b25)
Need 2 trays for 1 vehicle.
Sold individually.

Suspension bearing on left or front right shock absorber.

Compatible with Seat Ibiza type 6L all models

Suitable for vehicles with big cups 110 mm :
- Passat 3 Berline, Break & Syncro 88 ->93
engines 1.6 (EZ / 1F / RF / ABN), 1.6 TD (SB / RA),
1.8 (ABS / RP / AAM), 1.9 D (1Y), 1.9 TD (AAZ), 1.9 TDI (1Z),
1.8 GTI (PF / PB),1.8 16S (KR), 1.8 G60 (PG), 2.0 (2E), 2.0 16S (9A)
until chassis n° ->P-026 435.

For E34 Saloon:
- 518i M40 from 07/90 to 09/92
- 520i M20 from 07/90 to 09/92
- 524td M21 (including standard chassis)
- 525td/tds from 07/90 to 09/92 (including standard chassis)
- 525i M20 & M50 (including standard chassis)
- 530i M30 & M60 (including standard chassis)
- 535i M30 (including standard chassis)
- 540i M60 (including standard chassis)
- M5 S38B36

For E34 Touring (All years with standard chassis):
- 520i M20 (only sports chassis)
- 525i M50
- 525td/tds
- 530i M30 & M60
- 540i M60

Lower shock absorber bearing rubber for Mazda MX-5 NB and NBFL

- Fits under the shock absorber bearing
- For front and rear

Genuine MAZDA part

Sold individually

Upper front shock absorber support ring for Porsche Boxster type 986 from 1997 to 2004 :

- 986 2.5 Boxster - 204 hp (M96.20) from 1997 to 1999
- 986 2.7 Boxster - 220 hp (M96.22) from 2000 to 2002
- 986 3.2 Boxster S - 252 hp (M96.21) from 2000 to 2002

- 986 2.7 Boxster - 228 hp (M96.23) from 2003 to 2004
- 986 3.2 Boxster S - 260 hp (M96.24) from 2003 to 2004
- 986 3.2 Boxster S550 - 266 hp (M96.24) from 2003 to 2004

The support ring is sold individually , and two quantities are required per vehicle.

For Passat 5 (except 4-Motion):
- saloon type 3B3 from chassis 3B-1-300001->
- estate type 3B6

Connects the top of the shock absorber to the body,

For E60 :
- All models except M5
(525 xi, 530 xi and 530 xd only since 10/08->)

For E61 :
- 520 d M47N2
- 523 i N52
- 525 d M57N
- 525 i M54

MEYLE HD front suspension bearing for Mercedes E-Class W124

For Mercedes E-Class W124 saloon, C124 Coupé, S124 Estate and A124 Cabriolet all models
Left or right side

This MEYLE HD front suspension bearing is superior to the original. MEYLE HD parts are made from reinforced materials and optimized design, guaranteeing superior OE quality for lifetime replacement.

FEBI front suspension upper bearing for BMW 6 Series :

Bmw E63 :

- 630i 6 cyl 258hp from 02/2004 to 07/2007 (engine code n52b30a)
- 645ci 8 cyl 333hp from 05/2002 to 08/2005 (engine code n62b44a)
- 650i 8 cyl 367hp from 02/2005 to 07/2007 (engine code n62n48b)
- 630i 6 cyl 272hp from 04/2006 to 07/2010 (engine code n53b30a)
- 630i 6 cyl 258hp from 05/2006 to 07/2010 (engine code n52b30n)
- 650i 8 cyl 367hp from 04/2006 to 07/2010 (engine code n62b48b)
- 635d 6 cyl 286hp from 05/2006 to 07/2010 (engine code m57n2)

Bmw E64 :

- 630i 6 cyl 258hp from 03/2004 to 07/2007 (engine code n52b30a)
- 645ci 8 cyl 333hp from 09/2002 to 08/2005 (engine code n62b44a)
- 650i 8 cyl 367hp from 02/2005 to 07/2007 (engine code n62b48b)
- 630i 6 cyl 272hp from 04/2006 to 07/2010 (engine code n53b30a)
- 630i 6 cyl 258hp from 05/2006 to 07/2010 (engine code n52b30n)
- 650i 8 cyl 367hp from 04/2006 to 07/2010 (engine code n62b48b)
- 635d 6 cyl 286hp from 04/2006 to 07/2010 (engine code m57n2)

Caution! Not suitable for Bmw 6 Series M6 engine code s85.

This upper shock absorber stop is suitable for right-hand passenger or left-hand driver and includes the ball bearing.

Suspension bearing on left or front right shock absorber.

Compatible with Skoda Octavia type 1Z all models