Top plate spring suspension

Front suspension spring rubber stop for Mercedes:
- 190 Type W201
- C Class Type W202
- E Class Type W124

Note: only if "old" spring is a flathead spring

For A3 (8P), All models

for TT (8J), with reference code for rear axle :
- PR-1BL, 1BQ or 1BV

Suitable for:
-A4 (B5) 1.6 ->2.8 Petrol and Diesel from 08/00 ->09/0

Suitable for all BMW E30 models including M3

Only suitable for :
- 2 and 4-door saloon
- Cabriolet
With springs mark: Red

Located on the upper part of the rear shock absorber,

For Saloon, Touring, Coupé & Convertible:
- All models
(except red springs, due to 10 mm plates, and white springs, due to 5 mm plates)

Not suitable for the Compact version

Suitable for :
- Golf 2 & Jetta
- Golf 3 & Vento (except Break)
- Corrado

Bilstein front shock absorber cup for Peugeot 205 GTI

Sold by unit

Front suspensionupper cup diameter 110 mm.
Quality equivalent to the original.
Placebetween the top of the front spring and the suspension bearing.
2 required per vehicle, sold per unit for 1 side.

For Passat 3 (35i) Saloon& Estate all models 88 ->93:
(up to chassis No. ->31-P-026 435) including Syncro version (4 x 4)
Except for Passat 2.8 & 2.9 VR6.

2 par véhicule

Rear lower spring pad for Bmw 5 Series: - Compatible with all Bmw 5 Series E34 Sedan and Touring versions from 03/1987 to 12/1996 including M5 E34 engine code s38. Need 2 rear spring seals for 1 vehicle. Sold individually.

Rear spring lower cup for Volkswagen Transporter T4
For VW T4 all models with reinforced rear suspension (Camping, Multivan...)
Sold individually
Original Volkswagen part

Original 110mm front suspensionupper cup for Volkswagen Golf 3 Sedan, Variant and Vento with bad road suspension version :
- All models with wheels with 4 mounting holes from 1992 to 1995 including automatic gearbox and Syncro versions up to chassis number 1H-SW-062538 or 1H-SB-019475
INFORMATION: This part is suitable for vehicles with original bad road equipment part no. 1H0 412 341.
WARNING: Not suitable for Cabriolet and VR6 2.9 (ABV).
This upper suspension cup is placed between the top of the front spring and the suspension bearing .
This product is sold individually.
Original VW Classic Parts.

Reinforced upper front suspension bushing
Quality equivalent to the original. Specific for:
- Golf 2 1.8 G60 160hp (PG) 90 ->92
including Syncro versions (4 x 4)
- Golf 2 Rallye (4 x 4) G60 160hp (1H) 86 ->92

Placed between the top of the front spring the suspension bearing.

For Corrado from 89 ->95 up to chassisno.->50-S-000 051:
- 1.8 16S 136hp (KR)
- 1.8 G60 160hp (PG)
- 2.0 8S 115hp (2E)
- 2.0 16S 136hp (9A)

Impergomfront suspension cup bearing for Peugeot 306 all models Ball bearing Original quality part Sold individually Fits all 306 models.

Upper front shock absorber spring cup.
LHor RH side, sold per unit.
Original Volkswagen Classic Parts.

For Polo 86 / 86C, 08/1979 ->07/1994
Chassis no. 86A 0000 001 ->80-R-150 000.

Lower rear spring pad for Bmw 5 Series:

- Compatible with all Bmw 5 Series E39 Sedan engines from 02/1995 to 07/2003 including M5 E39 engine code S62.

Warning! Not suitable for Bmw 5 Series E39 Touring.

Sold individually.

Lower rear spring pad for Bmw 7 Series :
Bmw 7 Series E32:
- 730i 6cyl 197hp from 07/1986 to 04/1994 (engine code m30b30)- 730iL 6cyl 197hp from 12/1987 to 03/1994 (engine code m30b30)- 730i 8cyl 218hp from 05/1991 to 04/1994 (engine code m60b30)- 730iL 8cyl 218hp from 06/1992 to 03/1994 (engine code m60b30)- 735i 6cyl 220hp from 10/1985 to 07/1992 (engine code m30b35)- 735iL 6cyl 220hp from 06/1987 to 07/1992 (engine code m30b35)- 750i 12cyl 300hp from 07/1987 to 03/1994 (engine code m70)- 750iL 12cyl 300hp 11/1986 to 03/1994 (engine code m70) Warning! Not compatible with v8 engine code m60.
Need 2 rear spring seals for 1 vehicle. Sold individually.