Control arm

Front right suspension wishbone for 1968 Porsche 911 F type :
- 911 2.0 T / L / S from 1968

Driver's side mounting,

For Roadster (E85) and Coupé (E86):
- M 3.2 S54

Mounts on the passenger side,

For Roadster (E85) and Coupé (E86):
- M 3.2 S54

For E46 all models equipped with Sport Kit M II
(Not suitable for M3, 4-wheel drive)

For E46 all models equipped with Sport Kit M II
(Not suitable for M3, 4-wheel drive)

Front triangle protection cap for Porsche 912 from 1966 to 1967 :
- 912 1.6 from 1966 to 1967
4 quantities required per vehicle

Lower linkage for Mazda RX-8

For RX-8 SE ( 2003-2008 ) all models
Front left linkage

Cradle fittings:
- Front screw RX02660 x1
- Front washer RX02662 x1
- Rear screw RX02664 x1
- Rear Washer RX02666 x1
- Clamping nuts RX02668 x2

Silentblocks included
Bilstein German quality

Top linkage for Mazda RX-8

For RX-8 SE ( 2003-2008 ) all models
Front right linkage

Silentblocks included
Attaches to cradle with 2x RX02670

Bilstein German quality

Febifront right wishbone for Mercedes E-Class W124 without sport chassis
Supplied with suspension ball joint and silentblocks.
Cone diameter: 18mm
Fits Sedan, Coupé and Estate without sports chassis
Assignments :
Sedan :200 2.0 (124.020), Year of manufacture 01.1986 - 05.1990, 1996 ccm, 102 HP200 2.0 (124.020), build year 12.1985 - 05.1990, 1996 ccm, 109 HP200 D 2.0 (124.120), build year 12.1984 - 08.1989, 1997 ccm, 72 HP200 D 2.0 (124.120), Year of construction 08.1989 - 06.1993, 1997 ccm, 75 HP200 E 2.0, Year of construction 11.1992 - 05.1993, 1997 ccm, 105 HP200 E 2.0 (124.019), Year of build 10.1992 - 06.1993, 1998 ccm, 136 HP200 E (124.021), Year of construction 09.1988 - 08.1993, 1996 ccm, 118 HP200 E 2.0 (124.021), build year 09.1988 - 12.1989, 1996 ccm, 122 HP220 E 2.2 (124.022), build year 10.1992 - 06.1993, 2199 ccm, 150 HP230 E 2.3 (124.023), build year 12.1984 - 03.1992, 2298 ccm, 132 HP230 E 2.3 (124.023), Year of construction 01.1985 - 06.1993, 2298 ccm, 136 HP230 E Cat (124.023), Year of construction 06.1989 - 06.1993, 2298 ccm, 132 HP250 D 2.5 (124.125), Year of construction 04.1985 - 06.1993, 2497 ccm, 90 HP250 D 2.5 (124.125), Year of construction 01.1989 - 06.1993, 2497 ccm, 94 HP250 2.5 Turbo diesel (124.128), Year of build 09.1988 - 06.1993, 2497 ccm, 126 HP260 E 2.6 (124.026), Year of build 09.1985 - 08.1992, 2597 ccm, 160 HP260 E 2.6 (124.026), build year 09.1985 - 12.1989, 2597 ccm, 166 HP280 E 2.8 (124.028), build year 10.1992 - 06.1993, 2799 ccm, 197 HP300 D 3.0 (124.130), Year of construction 12.1984 - 08.1989, 2996 ccm, 109 HP300 D 3.0 (124.130), Year of construction 06.1990 - 06.1993, 2996 ccm, 110 HP300 D 3.0 (124.130), Year of construction 08.1989 - 06.1993, 2996 ccm, 113 HP300 E 3.0, Year of construction 01.1985 - 12.1985, 2960 ccm, 188 HP300 E 3.0, Year of construction 06.1985 - 08.1992, 2960 ccm, 188 HP300 E 3.0 (124.030), Year of construction 08.1985 - 08.1992, 2960 ccm, 180 HP300 3.0 Turbo diesel (124.133), Year of manufacture 09.1986 - 09.1988, 2996 ccm, 143 HP300 3.0 Turbo diesel (124.133), Year of construction 09.1988 - 06.1993, 2996 ccm, 147 HP
Coupé :200 CE (124.040), Year of construction 07.1992 - 07.1993, 1998 ccm, 136 HP200 CE (124.041), build year 03.1990 - 12.1992, 1996 ccm, 118 HP220 CE 2.2 (124.042), build year 10.1992 - 05.1993, 2199 ccm, 150 HP230 CE 2.3 (124.043), build year 03.1987 - 12.1992, 2298 ccm, 132 HP230 CE 2.3 (124.043), build year 03.1987 - 12.1992, 2298 ccm, 136 HP230 CE Cat (124.043), Year of construction 06.1989 - 12.1992, 2298 ccm, 132 HP300 CE 3.0, Year of construction 03.1987 - 12.1989, 2960 ccm, 188 HP300 CE 3.0 (124.050), Year of construction 03.1987 - 05.1993, 2960 ccm, 180 HP
Estate :200 2.0 (124.080), Year of build 01.1986 - 05.1990, 1996 ccm, 105 HP200 2.0 (124.080), Year of build 09.1985 - 08.1989, 1996 ccm, 109 HP200 D 2.0 (124.180), build year 09.1985 - 08.1991, 1997 ccm, 72 HP200 D 2.0 (124.180), build year 09.1988 - 08.1991, 1997 ccm, 75 HP200 TE 2.0 (124.079), Year of manufacture 05.1986 - 06.1993, 1998 ccm, 136 HP200 TE 2.0 (124.081), build year 09.1988 - 08.1992, 1996 ccm, 118 HP220 TE 2.2 (124.082), build year 10.1992 - 05.1993, 2199 ccm, 150 HP230 TE 2.3 (124.083), build year 09.1985 - 08.1992, 2298 ccm, 132 HP230 TE 2.3 (124.083), build year 09.1985 - 08.1992, 2298 ccm, 136 HP230 TE Cat (124.083), Year of construction 06.1989 - 08.1992, 2298 ccm, 132 HP250 D 2.5 (124.185), Year of construction 09.1985 - 06.1993, 2497 ccm, 90 HP250 D 2.5 (124.185), Year of construction 01.1989 - 06.1993, 2497 ccm, 94 HP250 TD Turbo (124.188), Year of construction 03.1988 - 07.1993, 2497 ccm, 126 HP280 TE 2.8 (124.088), Year of manufacture 10.1992 - 06.1993, 2799 ccm, 197 HP300 D 3.0 (124.190), Year of construction 09.1986 - 06.1993, 2996 ccm, 109 HP300 D 3.0 (124.190), Year of construction 01.1989 - 06.1993, 2996 ccm, 110 HP300 D 3.0 (124.190), build year 01.1989 - 06.1993, 2996 ccm, 113 HP300 3.0 Turbo diesel (124.193), Year of manufacture 01.1989 - 06.1993, 2996 ccm, 147 HP300 3.0 Turbo diesel, Year of construction 06.1992 - 05.1993, 2996 ccm, 136 HP300 TE 3.0 (124.090), Year of construction 01.1986 - 08.1992, 2960 ccm, 180 HP300 TE 3.0 (124.090), Year of construction 01.1986 - 12.1989, 2960 ccm, 188 HP

FEBI BILSTEIN front suspension wishbone for Audi A3 (8L)
For Audi A3 (8L) All models incl. Quattro, except S3
Left or right sideSold individually
Original FEBI BILSTEIN quality

Complete front suspension set to left + right side:
- 2 suspension arms with silent blocks
- 2 ball joints (diameter 17 mm)

To Golf 1 since 12/77 ->93 :
- Golf 1 Berline (since chassis 178 3173 584->)
- Golf 1 Cabriolet, Caddy, Jetta, Scirocco (all models)
- Scirocco (since chassis 538 2028 903->).

For Golf 3 and Vento with 4 x 100 center distance
Beline and Cabriolet (including 2E 2L)
Does not fit GTi

Suitable for :
- Golf 3

Lower front left suspension arm with silentblocs.

For VW Transporter T4, Multivan
including Syncro version (4 x 4)
Years: 01/1996 -> 06/2003
Chassis: from no. 70-T-200 001 ->

Complete high-end front-end renovation kit for BMW 3 Series E30 without steering damper :

4-door saloon :
- 318i 105hp phase 1 from 02/1983 to 08/1987 (engine code M10B18i)
- 318i 115hp phase 2 from 09/1987 to 04/1991 (engine code M40B18i)
- 325e 6cyl 122hp phase 1 from 01/1985 to 08/1987 (engine code M20B27)
- 325i 6cyl 170hp phase 1 from 03/1985 to 08/1987 (engine code M20B25)
- 325i 6cyl 170hp phase 2 from 09/1987 to 01/1991 (engine code M20B25)

Touring :
- 318i 115hp from 02/1989 to 02/1994 (engine code M40B18)
- 325i 6cyl 170hp from 07/1987 to 04/1993 (engine code M20B25)

2-door coupé :
- 318i 105hp phase 1 from 03/1982 to 08/1987 (engine code M10B18i)
- 318i 115hp phase 2 from 09/1987 to 04/1991 (engine code M40B18i)
- 318is 136hp phase 2 from 02/1989 to 05/1991 (engine code M42B18)
- 325e 6cyl 122hp phase 1 from 01/1985 to 09/1987 (engine code M20B27)
- 325i 6cyl 170hp phase 1 from 03/1985 to 08/1987 (engine code M20B25)
- 325i 6cyl 170hp phase 2 from 09/1987 to 03/1991 (engine code M20B25)
- M3 standard 200hp (S14) from 07/1985 to 08/1989
- M3 standard cat. 195 hp (S14) from 05/1986 to 05/1989
- M3 "Evolution I" 200 hp (S14) from 02/1987 to 05/1987

Cabriolet :
- 318i 115hp from 07/1990 to 04/1993 (engine code M40B18)
- 325i 6cyl 170hp from 07/1985 to 09/1990 (engine code M20B25)
- 325i 6cyl 170hp from 10/1990 to 01/1993 (engine code M20B25)
- M3 cat. 195 hp (S14) from 06/1988 to 06/1989
- M3 200 hp (S14) from 06/1988 to 06/1989
- M3 cat. 215 hp (S14) from 03/1990 to 06/1991

ATTENTION: Not suitable for models with steering damper (different right-hand steering bar) nor for 325ix 4-wheel drive!

Includes :
- 2 high-strength steel suspension wishbones for long-term durability
- 2 short stabilizer links
- 2 steering rods with ball joints (identical left and right)
- 2 front suspension wishbone eccentric bushes (M3 type)

High-quality bellows and elastomers will keep mechanical parts protected from water, dust and external aggression, ensuring greater durability over time.

The front-end repair kit preserves the original geometry settings to ensure excellent roadholding and perfect stability under acceleration and braking.

Supplied with silentblocs.
For Golf 1 saloon, cabriolet, Caddy
Jetta & Scirocco all models 74 ->93.

Remember to change the wishbone ball joints.

Front upper suspension brace for Mazda MX-5 NA without ABS

- Can be mounted on the right or left-hand side
- Comes with silentblocks

Genuine Mazda part

(Pas pour 1.8 G60)

FEBIlower right suspension triangle for Peugeot 205 GTI, Rallye and Turbo D
French original quality part
Assignments :- 1.3 Rallye 1294cm3 103hp (TU24) from 08/1987 to 07/1992- 1.6 GTI 1580cm3 105hp (XU5J) from 03/1984 to 12/1986- 1.6 GTI 1580cm3 115hp (XU5JA) from 03/1986 to 12/1986- 1.6 GTI 1580cm3 115hp (XU5JA) from 01/1987 to 07/1992- 1.8 GLD, GRD, SRD 1769cm3 60hp (XUD7) from 09/1983 to 07/1987- 1.8 XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1984 to 07/1987- 1.8 GLD, GRD, GTD, XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1987 to 12/1998- 1.8 Dturbo 1769cm3 78hp (XUD7T) from 08/1990 to 12/1998- 1.9 D 1905cc 65hp (XUD9)- 1.9 GTI 1905cm3 130hp (XU9JA) from 01/1987 to 07/1992- 1.9 GTI Catalyzed 1905cm3 122hp (XU9JA/Z) from 08/1992 to 12/1993- 1.9 Gentry 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1993
Cabriolet :- 1.6 CTI 1580cm3 115hp (XU5JA) from 08/1985 to 07/1992- 1.9 CTI Catalyzed 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1993

Rear lower wishbone for Mazda MX-5 NA

For NA all models
Left side (driver)

The centerpiece of the rear suspension system, the lower wishbone is the mounting point for the shock absorber, stabilizer bar and rear hub carrier.
Supplied without silentblocks, it can be fitted with original or POWERFLEX polyurethane silentblocks.

Genuine Mazda part

Screws not included
Cradle mounting: MX10963 x2
Wheel-side mounting: MX15439 MX15484