Control arm

For Audi 80 and 90 (including Estate) from 92 ->96:
- 1.6 71hp and 101hp (ABM and ADA)
- 1.9 Turbo Diesel75hp (AAZ)
- 1.9 TDi 90hp (1Z)
- 2.0 90hp, 115hp, 137hp and 140hp (ABT, ABK, 6A and ACE)
- 2.3 133hp (NG)
- 2.8 V6 174hp (AAH) up to ->8C-N-000351
- 2.6 and 2.8 V6 (AAH and ABC) from 8C-N-175592->
- Quattro up tochassis ->8C-R-125 000 except 2.2 20V (ABY) and RS2

For Audi Coupé from 89 ->96:
- From chassis 8B-N-000 256 ->8B-N-009 191
except 2.0 (AAD, 3A) automatic and 2.8 V6 (AAH)

For Audi Coupé Quattro from 89 ->96:
- up to chassis ->8B-M-040000 except 2.2 20V (3B)
-From chassis 8B-N-000 001 ->8B-R-005 000
except 2.2 20V (ABY)

For Audi Cabriolet from 89 ->00:
- 1.6 (ADP)
- 1.8 (ADR)
- 1.9 TDi 90hp (1Z, AHU)
- 2.0 (ABK, ACE) from chassis 8G-N-001 534->
- 2.3 (NG) from chassis 8G-N-001 534->
- 2.6 V6 150hp (ABC, ACZ) from chassis 8G-R-003 925->
- 2.8 V6 174hp (AAH) from chassis 8G-R-003 925->

For Audi 80 and 90 from 92 ->96:
- 1.6 71hp and 101hp (ABM and ADA)
- 1.9 Turbo Diesel 75hp (AAZ)
- 1.9 TDi 90hp (1Z)
- 2.0 90hp, 115hp, 137hp and 140hp(ABT, ABK, 6A and ACE)
- 2.3 133hp (NG)
- 2.8 V6 174hp (AAH) up to ->8C-N-000351
- 2.6 and 2.8 V6 (AAH andABC) from 8C-N-175592->
- Quattro up to chassis ->8C-R-125 000 except 2.2 20V (ABY) and RS2

for Audi Coupé from 89 ->96:
- from chassis 8B-N-000 256 ->8B-N-009 191
except 2.0 (AAD, 3A) automatic gearbox and2.8 V6 (AAH)

For Audi Coupé Quattro from 89 ->96:
- up to chassis ->8B-M-040000 except 2.2 20V (3B)
- From chassis 8B-N-000 001 ->8B-R-005 000
except 2.2 20V (ABY)

For Audi Cabriolet from 89 ->00:
- 1.6 (ADP)
- 1.8 (ADR)
- 1.9 TDi 90hp (1Z, AHU)
- 2.0 (ABK, ACE) from chassis 8G-N-001 534->
- 2.3 (NG) from chassis 8G-N-001 534->
- 2.6 V6 150hp (ABC, ACZ) from chassis 8G-R-003 925->
- 2.8 V6 174hp (AAH)from chassis 8G-R-003 925->

For A3 (8L):
- S3 Quattro 210hp (APY, AMK, AUL)
- S3 Quattro 225hp (BAM)

Pour TT (8N):
- All models

For A3 (8L):
- S3 Quattro 210hp (APY, AMK, AUL)
- S3 Quattro 225hp (BAM)

Pour TT (8N):
- All models

For models up to ->1999, it is essential to change the left wishbone at the same time

For A3 (8L) All models including Quattro (4 x 4)
except version S3 1.8 Turbo (APY, AMK, BAM, AUL)

MEYLE Rear lower right wishbone for Porsche Cayenne 955 :

- 955 Cayenne V6 3.2 - 250 hp (M02.2Y) from 2003 to 2006
- 955 Cayenne S V8 4.5 - 340 hp (M48.00) from 2003 to 2006
- 955 Cayenne Turbo V8 4.5 - 450 hp (M48.50) from 2003 to 2006
- 955 Cayenne Turbo S V8 4.5 - 521 hp (M48.50) of 2006

MEYLE Rear lower left wishbone for Porsche Cayenne 955 :

- 955 Cayenne V6 3.2 - 250 hp (M02.2Y) from 2003 to 2006
- 955 Cayenne S V8 4.5 - 340 hp (M48.00) from 2003 to 2006
- 955 Cayenne Turbo V8 4.5 - 450 hp (M48.50) from 2003 to 2006
- 955 Cayenne Turbo S V8 4.5 - 521 hp (M48.50) of 2006

For Coupé & Cabriolet:
- M3 S54

This triangle offers optimized quality compared to the original, design flaws are corrected to last longer and achieve better operating efficiency,

For Roadster (E85) and Coupé (E86):
- All models (except Z4 M)

This triangle offers optimized quality compared to the original, design flaws are corrected to last longer and achieve better operating efficiency,

For Roadster (E85) and Coupé (E86):
- All models (except Z4 M)

For all E21 versions

Comes with the ball joints

For all E30 except ix (4x4)
M3 version until ->09/88 only

Passenger side.

For E46 all models equipped with Sport Kit M II
(Not suitable for M3, 4-wheel drive)

For E46 all models equipped with Sport Kit M II
(Not suitable for M3, 4-wheel drive)

For E46 Saloon, Touring, Coupé, Cabriolet and Compact:
- All models
(except M3, 4WD and vehicles with the Sport M II kit)

For E46 Saloon, Touring, Coupé, Cabriolet and Compact:
- All models
(except M3. 4WD and vehicle with the Sport M II kit)

Driver's side mounting,

For Roadster (E85) and Coupé (E86):
- M 3.2 S54

Mounts on the passenger side,

For Roadster (E85) and Coupé (E86):
- M 3.2 S54

Rear lower wishbone for Mazda MX-5 NA

For NA all models
Right side (passenger)

The centerpiece of the rear suspension system, the lower wishbone is the mounting point for the shock absorber, stabilizer bar and rear hub carrier.
Supplied without silentblocks, it can be fitted with original or POWERFLEX polyurethane silentblocks.

Genuine Mazda part

Screws not included
Cradle mounting: MX10963 x2
Wheel-side mounting: MX15439 MX15484

Front left- or right-hand uppersuspension wishbone
Sold by unit. Original Volkswagen Classic Parts.

For Transporter T25 / T3 Syncro, 10/1984 ->07/1992
4 x 4 version.