Direction ball

Left-hand axial ball joint for Renault Clio I from 1990 to 1994.

Compatible with Clio I phase 1:
- All models

For all E46 versions, except M3 and 4WD

This steering lever lock plate for DYANEs and Acadianes is true to the original.

This steering lock bracket holds the steering levers for the models.

This SASIC steering ball joint repair kit for Peugeot 504 - 12mm allows the repair of the right and left steering ball joints of all Peugeot 504 models up to September 1979.
As the lower steering ball joints of Peugeot 504 models have become difficult to find in good quality, this kit offers original-quality components including the 12mm cone and 4 6.5mm-thick washers to restore tired lower steering ball joints.

Left or right outer steering knuckle for Brazilian VW Combi Split from 1957 to 1975.

Steering knuckle nut for Mazda MX-5 NA

For NA all models

Enables you to fix the steering heads to the hub carrier

Genuine Mazda part

Barre centrale de direction réglable complète avec rotules.

Pour VW Combi Split
Années : 03/1955 ->07/1967
Châssis : depuis N° 117 902->

MEYLE Inner steering ball joint for all Porsche 911 type 997 :

- 997 phase 1 3.6 - 325 hp (M96.05) Carrera from 2005 to 2008
- 997 phase 1 3.6 - 325 hp (M96.05) Carrera 4 from 2005 to 2008
- 997 phase 1 3.8 - 355 hp (M97.01) Carrera S from 2005 to 2008
- 997 phase 1 3.8 - 355 hp (M97.01) Carrera 4S from 2005 to 2008
- 997 phase 1 3.8 X51 - 380 hp (M97.01S) Carrera S from 2007 to 2008
- 997 phase 1 3.8 X51 - 380 hp (M97.01S) Carrera 4S from 2007 to 2008
- 997 phase 2 3.6 - 345 hp (MA 102) Carrera from 2009 to 2012
- 997 phase 2 3.6 - 345 hp (MA 102) Carrera 4 from 2009 to 2012
- 997 phase 2 3.8 - 385 hp (MA 101) Carrera S from 2009 to 2012
- 997 phase 2 3.8 - 385 hp (MA 101) Carrera 4S from 2009 to 2012
- 997 phase 2 3.8 X51 - 408 hp (MA 101) Carrera S from 2009 to 2012
- 997 phase 2 3.8 X51 - 408 hp (MA 101) Carrera 4S from 2009 to 2012
- 997 3.8 - 408 hp (MA 101) Carrera GTS from 2011 to 2012
- 997 3.8 - 408 hp (MA 101) Carrera 4 GTS of 2012
- 997 3.6 Turbo - 480 hp (M97.70) from 2006 to 2009
- 997 3.8 Turbo - 500 hp (MA 170) from 2010 to 2013
- 997 3.8 Turbo S - 530 hp (MA 170) from 2010 to 2013
- 997 3.6 GT2 - 530 hp (M97.70S) from 2008 to 2009
- 997 3.6 GT2 RS - 620 hp (M97.70) of 2011
- 997 3.6 GT3 - 415 hp (M97.76) from 2007 to 2009
- 997 3.8 GT3 - 435 hp (M97.77) from 2010 to 2011
- 997 3.6 GT3 RS - 415 hp (M97.76) from 2007 to 2009
- 997 3.8 GT3 RS - 450 hp (M97.77R) from 2010 to 2011
- 997 4.0 GT3 RS - 500 hp (M97.74) of 2012

Suitable for right and left-hand sides

Sold individually

Single ball joint for right-hand steering bar for power steering rack.
Characteristics: M14 x 1.5

Compatible with Audi TT type 8N, all models

Steering head for Mazda RX-8

For RX-8 all models from 2003 to 2012
For the right-hand side including right-hand drive (RHD)

Enables you to connect the axial steering link to the front hub carrier and to adjust the wheel alignment
A worn steering head will create give when steering

Sold with nut and pin
German quality

This complete steering head restoration kit for Meharis - 12 pieces is compatible with all models.

This complete steering head repair kit enables you to refurbish the inside of a steering rack whatever the model of 2cv or derivative.

It consists of:
- 2 steering heads
- 2 brake nuts
- 2 guide dice for the steering heads
- 4 steering head cups
- 1 steering damper silent block
- 1 spring
- 1 split pin

This SASIC steering ball joint repair kit for Peugeot 504 - 12mm allows the repair of right and left steering ball joints on all Peugeot 504 models from September 1979.
As the lower steering ball joints of Peugeot 504 models have become difficult to find in good quality, this kit offers original-quality components including the 12mm cone and 4 8mm-thick washers to restore tired lower steering ball joints.

This steering bar bellows for Mehari is faithful to the original.
This high quality neoprene steering bellows , right or left, is compatible with all Mehari models.

"Large cone" steeringball joint
right-hand inner side (for steering damper)

For Beetle 1200, 1300, 1500 from 05/1968->
(From chassis no. 118 857 240->)
also for Karmann-Ghia Type 14

For Audi A3 up to chassis -> 8L-W-050 421

This steering rod end repair kit for 2cv cars and derivatives is true to the original.

This steering rod end repair kit for one complete side is compatible with either the right or left-hand side for all 2cv and derivative models.

It consists of:
- 2 cups
- 1 castle nut and pin
- 1 steering spring

MEYLE HD range reinforced steering head, left driver's side or right passenger's side, for BMW X5 E53:

- 4.4i V8 286hp phase 1 from 07/1999 to 09/2003 (engine code M62B44TU)
- 4.4i V8 320hp phase 2 from 01/2003 to 09/2006 (engine code N62B44)
- 3.0i 6cyl 231hp phase 1 from 08/1999 to 09/2003 (engine code M54B30)
- 3.0i 6cyl 231hp phase 2 from 10/2003 to 09/2006 (engine code M54B30)
- 4.6is V8 347hp phase 1 from 01/2001 to 09/2003 (engine code M62B46)
- 4.8is V8 360hp phase 2 from 11/2003 to 09/2006 (engine code N62B48)
- 3.0d 6cyl 184hp phase 1 from 01/2000 to 09/2003 (engine code M57D30)
- 3.0d 6cyl 218hp phase 2 from 10/2003 to 09/2006 (engine code M57D30TU)

Dimensions :
- Length: 190mm
- Thread: M14x1.5
- Taper: 15.4mm

This part offers optimized quality compared to the original, with design defects corrected and greater strength for improved durability and roadholding.

This product is sold individually.

Febi front left steering head for Bmw 7 Series:
- Compatible with all Bmw 7 Series E38 versions from 07/1993 to 07/2001 including model 750i v12 engine code m73.

Ball joint located at the end of the steering bar, on the passenger side,

For Sedan :
- 535 i M62
- 540 i M62
- M5 S62

For Touring :
- 540 i M62

For Audi A3 up to chassis -> 8L-W-050 421