Direction ball

Steering head for Mazda RX-8

For RX-8 all models from 2003 to 2012
For the left-hand side including right-hand drive (RHD)

Enables you to connect the axial steering link to the front hub carrier and to adjust the wheel alignment
A worn steering head will create give when steering

Sold with nut and pin
German quality

Steering knuckle with "small cone" left-hand thread.
Mounting on outside for short left-hand bar,
or inside for long right-hand bar.
Superior quality.

For VW Type 3 all models
Years: 04/1961 ->07/1967
Chassis : N° 000 001 ->317 500 000.

Small conical steering ball joint, right-hand thread.
Fitted on external right-hand side for the long bar.
Alternative to the inner right-hand side of the short bar
no longeravailable (original elbow). Superior quality.

For Type 3 all versions, 04/1961 ->07/1967
Chassis no. 000 001 ->317 500 000.

Large conical steering ball joint, right-hand thread.
Assembly on external right-hand side for thelong bar. Superior quality.

For Type 3 all versions,08/1967 ->07/1972
Chassis no. 318 000 001 ->313 2500 000.

90º tie-rod with cone-shaped spacer. Fitted on the inner left-hand side between the short rod and the steering arm. Superior quality.

For VW Type 3, all models
Years: 08/1967 -> 07/1972
Chassis no.: 318 000 001 ->313 2500 000.

MEYLE HD offers optimised quality compared to the original. Design defects have been rectified for greater durability and better operating efficiency

Ball joint only (without tie rod) for the passenger side:

For E90, E91, E92 & E93:
- All models with original ZF fitment except 4-wheel drive
(except xd & xi)

Suitable for all BMW E21 models
Position : Front left or right
Thread: M14 x 1.5 (right-hand thread)

For Audi 100/ 200 All versions

MEYLE Inner steering ball joint for Porsche Boxster 987 :

- 987 2.7 Boxster fase 1 - 240 cv (M96.25) de 2005 a 2006
- 987 3.2 Boxster S fase 1 - 280 cv (M96.26) de 2005 a 2006
- 987 2.7 Boxster fase 1 - 245 cv (M97.20) de 2007 a 2008
- 987 3.4 Boxster S fase 1 - 295 cv (M97.21) de 2007 a 2008
- 987 3.4 Boxster RS 60 Spyder - 303 cv (M97.22) de 2008
- 987 2.9 Boxster fase 2 - 255 cv (MA1.20) de 2009 a 2012
- 987 3.4 Boxster S fase 2 - 310 cv (MA1.21) de 2009 a 2012
- 987 3.4 Boxster Spyder - 320 cv (MA1.21) de 2010 a 2012

Suitable for right and left-hand sides

Sold individually

MEYLE Inner steering ball joint for Porsche Cayman 987 :

- 987 2.7 Cayman phase 1 - 245 hp (M97.20) from 2007 to 2008
- 987 3.4 Cayman S phase 1 - 295 hp (M97.21) from 2006 to 2008
- 987 3.4 Cayman S Sport - 303 hp (M97.22) of 2008
- 987 2.9 Cayman phase 2 - 265 hp (MA1.20) from 2009 to 2012
- 987 3.4 Cayman S phase 2 - 320 hp (MA1.21) from 2009 to 2012
- 987 3.4 Cayman R - 330 hp (MA1.21) from 2011 to 2012

Suitable for right and left-hand sides

Sold individually

Jp Group left frontball joint for Mercedes E-Class:
- Compatible with all Mercedes E-Class W210 Sedan and S211 Estate versions from 06/1995 to 03/2003 except 4-wheel drive model type 4 Matic.

Jp Group right frontball joint for Mercedes E-Class:
- Compatible with all Mercedes E-Class W210 Sedan and S211 Estate versions from 06/1995 to 03/2003 except 4-wheel drive model type 4 Matic.

MEYLE Inner steering ball joint for all Porsche 911 type 997 :

- 997 phase 1 3.6 - 325 hp (M96.05) Carrera from 2005 to 2008
- 997 phase 1 3.6 - 325 hp (M96.05) Carrera 4 from 2005 to 2008
- 997 phase 1 3.8 - 355 hp (M97.01) Carrera S from 2005 to 2008
- 997 phase 1 3.8 - 355 hp (M97.01) Carrera 4S from 2005 to 2008
- 997 phase 1 3.8 X51 - 380 hp (M97.01S) Carrera S from 2007 to 2008
- 997 phase 1 3.8 X51 - 380 hp (M97.01S) Carrera 4S from 2007 to 2008
- 997 phase 2 3.6 - 345 hp (MA 102) Carrera from 2009 to 2012
- 997 phase 2 3.6 - 345 hp (MA 102) Carrera 4 from 2009 to 2012
- 997 phase 2 3.8 - 385 hp (MA 101) Carrera S from 2009 to 2012
- 997 phase 2 3.8 - 385 hp (MA 101) Carrera 4S from 2009 to 2012
- 997 phase 2 3.8 X51 - 408 hp (MA 101) Carrera S from 2009 to 2012
- 997 phase 2 3.8 X51 - 408 hp (MA 101) Carrera 4S from 2009 to 2012
- 997 3.8 - 408 hp (MA 101) Carrera GTS from 2011 to 2012
- 997 3.8 - 408 hp (MA 101) Carrera 4 GTS of 2012
- 997 3.6 Turbo - 480 hp (M97.70) from 2006 to 2009
- 997 3.8 Turbo - 500 hp (MA 170) from 2010 to 2013
- 997 3.8 Turbo S - 530 hp (MA 170) from 2010 to 2013
- 997 3.6 GT2 - 530 hp (M97.70S) from 2008 to 2009
- 997 3.6 GT2 RS - 620 hp (M97.70) of 2011
- 997 3.6 GT3 - 415 hp (M97.76) from 2007 to 2009
- 997 3.8 GT3 - 435 hp (M97.77) from 2010 to 2011
- 997 3.6 GT3 RS - 415 hp (M97.76) from 2007 to 2009
- 997 3.8 GT3 RS - 450 hp (M97.77R) from 2010 to 2011
- 997 4.0 GT3 RS - 500 hp (M97.74) of 2012

Suitable for right and left-hand sides

Sold individually

Steering ball joint "big cone"

- Exterior right side to:
Beetle 1200, 1300, 1500 since 05/1968->
(since chassis N° 118 857 240->)
the same to Karmann-Ghia type 14

- Interior right or left side to:
All Beetle models 1302 & 1303

MEYLE HD offers optimised quality compared to the original. Design defects have been rectified for greater durability and better operating efficiency

Ball joint only (without tie rod) for the passenger side:

For E90:
- 316 i N45 & N45N
- 318 i N46 & N46N
- 318 d N47
- 320 d N47
- 320 i N46 & N46N
- 320 si N45

Pour E91:
- 318 i N46 & N46N
- 318 d N47
- 320 d N47
- 320 i N46 & N46N

For E92 & E93:
- 320 d N47
- 320 i N46N

Ball joint located at the end of the tie rod, on the driver side,

For Saloon & Touring:
- All models (except V8: 535 i, 540 i & M5)

For passenger side,

For Roadster (E85) and Coupé (E86):
- All models including Z4 M

MEYLE HD range reinforced steering head, left driver's side or right passenger's side, for BMW X5 E53:

- 4.4i V8 286hp phase 1 from 07/1999 to 09/2003 (engine code M62B44TU)
- 4.4i V8 320hp phase 2 from 01/2003 to 09/2006 (engine code N62B44)
- 3.0i 6cyl 231hp phase 1 from 08/1999 to 09/2003 (engine code M54B30)
- 3.0i 6cyl 231hp phase 2 from 10/2003 to 09/2006 (engine code M54B30)
- 4.6is V8 347hp phase 1 from 01/2001 to 09/2003 (engine code M62B46)
- 4.8is V8 360hp phase 2 from 11/2003 to 09/2006 (engine code N62B48)
- 3.0d 6cyl 184hp phase 1 from 01/2000 to 09/2003 (engine code M57D30)
- 3.0d 6cyl 218hp phase 2 from 10/2003 to 09/2006 (engine code M57D30TU)

Dimensions :
- Length: 190mm
- Thread: M14x1.5
- Taper: 15.4mm

This part offers optimized quality compared to the original, with design defects corrected and greater strength for improved durability and roadholding.

This product is sold individually.

Steering ball joint M12 x 1.5

Steering ball joint M12 x 1.5