Spring

Set of 4 EIBACH lowering springs for Mazda MX-5 NC

For NC from 2005 to 2008
Not suitable for NCFLs

Front lowering: 30mm
Rear lowering: 30mm
There may be less lowering if you have an original sport chassis

This set of EIBACH lowering springs is suitable for fitting with sport shocks such as Bilstein B6 or original shocks
If your shocks are original, we advise you to replace them at the same time!

A set of REIBACH lowering springs will greatly improve the handling of your MX-5. The centre of gravity will be lowered and will reduce the effects of rolling in turns

Set of 4 EIBACH lowering springs for Mazda MX-5

For MX-5 NA all models from 1989 to 1997

These EIBACH lowering springs lower your front/rear ride height by -35mm.
They can be fitted with original shocks or sport shocks like the Bilstein B69
Your centre of gravity will be lowered for a sporty look, and it greatly improves your handling!

Front suspension shock absorber spring
original type, standard hardness.

For Transporter T3/T25, 05/1979 ->07/1992
All models except Syncro (4 x 4).

Kit of 4 EIBACH short springs for Porsche Boxster type 987 :

- 987 2.7 Boxster phase 1 - 240 hp (M96.25) from 2005 to 2006
- 987 3.2 Boxster S phase 1 - 280 hp (M96.26) from 2005 to 2006
- 987 2.7 Boxster phase 1 - 245 hp (M97.20) from 2007 to 2008
- 987 3.4 Boxster S phase 1 - 295 hp (M97.21) from 2007 to 2008
- 987 3.4 Boxster RS 60 Spyder - 303 hp (M97.22) of 2008
- 987 2.9 Boxster phase 2 - 255 hp (MA1.20) from 2009 to 2012
- 987 3.4 Boxster S phase 2 - 310 hp (MA1.21) from 2009 to 2012
- 987 3.4 Boxster Spyder - 320 hp (MA1.21) from 2010 to 2012

Only for Boxster 987 without PASM

Designed and tested to work with original shock dampers, you can also combine them with firmer Bilstein shock absorbers up to Bilstein B12.

These EIBACH sport springs will lower your Porsche Boxster 987 by 30 mm. In addition to giving it a more sporty look, you will give your roadster an even more "Kart" handling. Although firmer, the EIBACH offers an interesting compromise between comfort and sportiness.

Set of 4 MTS Technik short springs for Mazda MX5 NB and NBFL

These springs, developed by MTS Technik, can be installed in place of your original springs, on original or sport-type shock absorbers. They lower your MX5 by 30mm.
Your center of gravity will be lowered for sporty handling!

Front suspension spring to replace an original spring with 2 pink and 1 green line for Volkswagen Golf 4 and Bora up to chassis number ->1J-Y-720000, front-wheel drive or 4Motion with suspension codes 1JA and 1JD :

- 1.4 75hp (AHW, APE, AKQ)
- 1.6 100hp (AEH, AKL, APF)
- 1.6 105hp (ATN)
- 1.8 125hp (AGN)
- 1.8 Turbo 150hp (AGU, ARZ)
- 1.9 SDi 68hp (AGP, AQM)
- 1.9 TDi 90hp (AGR, ALH)
- 1.9 TDi 100hp (ATD)
- 1.9 TDi 110hp (AHF)
- 1.9 TDi 115hp (AJM)
- 2.0 115hp (APK, AQY)
- 2.3 150hp (AGZ)

To avoid any imbalance or difference in height, it is imperative to change the 2 sides at the same time.

This product is sold individually.

Rear suspension spring to replace an original spring with 3 silver and 2 green lines for Volkswagen Golf 4 and Bora up to chassis number ->1J-Y-720000, front-wheel drive or 4Motion with suspension codes 1JA and 1JD :

- 1.4 75hp (AHW, APE, AKQ)
- 1.6 100hp (AEH, AKL, APF)
- 1.6 105hp (ATN)
- 1.8 125hp (AGN)
- 1.8 Turbo 150hp (AGU, ARZ)
- 1.9 SDi 68hp (AGP, AQM)
- 1.9 TDi 90hp (AGR, ALH)
- 1.9 TDi 100hp (ATD)
- 1.9 TDi 110hp (AHF)
- 1.9 TDi 115hp (AJM)
- 2.0 115hp (APK, AQY)
- 2.3 150hp (AGZ)

To avoid any imbalance or difference in height, it is imperative to change the 2 sides at the same time.

This product is sold individually.

Front suspension spring for Volkswagen Passat B5
For VW Passat B5 :- W8 4.0 275hp (BDN, BDP)
For models with sport chassisLeft or right side, sold individually
Genuine Volkswagen part

KYB frontshock absorber spring for Bmw Z3 Series : 

Bmw Z3 E36 :

- 2.8 phase 1 - 192hp from 07/1997 to 08/1998 (engine code m52b28)
- 2.8 phase 1 - 193hp from 09/1998 to 03/1999 (engine code m52b28tu)
- 2.8 phase 2 - 193hp from 04/1999 to 05/2000 (engine code m52b28tu)
- 3.0i phase 2 - 231hp from 09/1999 to 06/2002 (engine code m54b30)

Suitable for OE mounting with standard chassis.

Sold individually.

Short springs for Bmw 3 Series :
- Compatible with all Bmw 3 Series E30 Sedan, Touring, Coupé and Cabriolet versions from 02/1982 to 04/1994 only with 6-cylinder petrol and diesel engines.
To know :
- Front lowering -60/ Rear lowering -60mm
- Not suitable for 4-wheel drive model 325ix.

Rearairbag for Bmw X5:

- Compatible with all Bmw x5 E70 versions from 02/2006 to 06/2013 except sport model M Technic engine code s63.

Warning! Not suitable with options S226A Sport suspension and S2VAA Adaptive drive.

2air bags required per vehicle.

Sold individually.

EIBACH short springs for Mercedes SLK R170

For Mercedes SLK R170 all models except AMG :
- SLK 200 (170.435) from 09/1996 to 01/2000
- SLK 200 Kompressor (170.445) from 09/1996 to 01/2000
- SLK 200 Kompressor (170.444) from 02/2000 to 12/2004
- SLK 230 Kompressor (170.447) from 09/1996 to 01/2000
- SLK 230 Kompressor (170.449) from 02/2000 to 12/2004
- SLK 320 (170.465) from 02/2000 to 12/2004

The EIBACH short spring kit is designed to work in conjunction with original equipment shock absorbers or sport shock absorbers. It is fitted in place of the original springs.

EIBACH sport springs lower the vehicle by -30mm front and rear. As well as giving your roadster a sportier look, you'll be giving it an even more sporty feel by lowering the car's center of gravity. EIBACH springs offer a interesting compromise between comfort and sportiness.

KYB frontshock absorber spring for Bmw 3 Series E30:

Sedan :

- 316 1.8L 90hp phase 1 from 09/1984 to 08/1987 (engine code M10B18)
- 318i 105hp phase 1 from 09/1984 to 08/1987 (engine code M10B18i)
- 320i 6cyl 125hp phase 1 from 09/1984 to 09/1984 (engine code M20B20)
- 323i 6cyl 139hp phase 1 from 09/1984 to 09/1987 (engine code M20B23)
- 325e 6cyl 2.7L 122hp phase 1 from 01/1985 to 08/1987 (engine code M20B27)

Coupé :

- 316 1.8L 90hp phase 1 from 09/1984 to 08/1987 (engine code M10B18)
- 318i 105hp phase 1 from 09/1984 to 08/1987 (engine code M10B18i)
- 320i 6cyl 125hp phase 1 from 09/1984 to 08/1985 (engine code M20B20)
- 323i 6cyl 150hp phase 1 from 09/1984 to 03/1985 (engine code M20B23)
- 325e 6cyl 2.7L 122hp phase 1 from 01/1985 to 09/1986 (engine code M20B27)

Suitable for original mounting with standard chassis.

Sold individually.

KYB front shock absorber spring for Bmw Z3 Series:

Bmw Z3 E36 :

- 1.8 4cyl phase 1 115hp from 10/1995 to 09/1998 (engine code M43B18)
- 1.9 4cyl phase 1 140hp from 10/1995 to 04/1999 (engine code M44B19)
- 1.8 4cyl phase 2 118hp from 10/1995 to 04/1999 (engine code M43B19TU)
- 1.9 4cyl phase 2 118hp from 08/2000 to 06/2002 (engine code M43B19TU)
- 2.0 6cyl phase 2 150hp from 07/1998 to 10/2000 (engine code M52B20TU)

Suitable for original mounting with standard chassis.

Sold individually.

For 2-door and 4-door Golf 2:
- 1.0 -> 1.8 petrol and Diesel

1 front suspension spring sold individually.

Rear coil spring for VOLKSWAGEN Transporter T5:
3 stripes: grey

TA Technixshort spring kit -45mm for Mercedes 200 and 230 W124
This front and rear spring kit allows you to lower your car by up to -45mm. This lowering may vary according to the condition of your shock absorbers.
Suitable for 4-cylinder petrol and diesel cars, sedans and coupes.
Not suitable for model with pilot-controlled shock absorber with variable height.
Assignments :- Mercedes 200 124.020 01/1985 to 08/1989 4 cylinders 2.0L 109hp (M 102.922) Sedan phase 1- Mercedes 200 124.020 09/1989 to 06/1990 4 cylinders 2.0L 109hp (M 102.922) Sedan phase 2- Mercedes 200 D 124.120 01/1985 to 08/1989 4 cylinders 2.0L 72hp (OM 601.912) Sedan phase 1- Mercedes 200 D 124.120 09/1989 to 07/1993 4 cylinders 2.0L 72hp (OM 601.912) Sedan phase 2- Mercedes 200 E 124.021 07/1985 to 08/1989 4-cylinder 2.0L 122hp (M 102.963) Phase 1 sedan- Mercedes 200 E 124.021 09/1989 to 09/1992 4-cylinder 2.0L 122hp (M 102.963) Sedan phase 2- Mercedes 200 E 124.021 10/1992 to 07/1993 4 cylinders 2.0L 122hp (M 102.963) Sedan phase 2- Mercedes 200 CE-16 124.040 06/1990 to 12/1992 4-cylinder 2.0L 136hp (M 111.940) Coupé phase 2- Mercedes 200 CE 124.040 09/1992 to 07/1993 4-cylinder 2.0L 136hp (M 111.940) Coupé phase 2- Mercedes E 200 124.019 07/1993 to 08/1995 4-cylinder 2.0L 136hp (M 111.940) Saloon phase 3- Mercedes 230 E 124.023 01/1985 to 08/1989 4 cylinders 2.3L 136hp (M 102.982) Sedan phase 1- Mercedes 230 E 124.023 09/1989 to 10/1992 4 cylinders 2.3L 136hp (M 102.982) Sedan phase 2- Mercedes 230 CE 124.043 04/1987 to 08/1989 4 cylinders 2.3L 136hp (M 102.982) Coupé phase 1 - Mercedes 230 CE 124.043 09/1989 to 09/1992 4 cylinders 2.3L 136hp (M 102.982) Coupé phase 2

Rearshock absorberspring for Bmw z4 :
Bmw z4 E85 Roadster :
- 2.0i 4 cyl 150hp phase 1 from 06/2004 to 12/2005 (engine code N46B20)- 2.0i 4 cyl 150hp phase 2 from 01/2006 to 08/2008 (engine code N46B20)- 2.2i 170hp phase 1 from 12/2002 to 11/2005 (engine code M54B22)- 2.5i 192hp phase 1 from 04/2002 to 11/2005 (engine code M54B25)- 2.5i 177hp phase 2 from 10/2004 to 07/2008 (engine code N52B25)- 2.5si 218hp phase 2 from 10/2004 to 08/2008 (engine code N52B25)- 3.0i 231hp phase 1 from 04/2002 to 11/2005 (engine code M54B30)- 3.0si 265hp phase 2 from 10/2004 to 07/2008 (engine code N52B30)
Bmw z4 E86 Coupé :
- 3.0si 265hp from 10/2005 to 08/2008 (engine code N52B30)

Spring with grey marking for VOLKSWAGEN Transporter T4 from 1991 to 2003 with lowered suspension and chassis:
- All engines.