Spring and damper kit

For E30:
- 316 i and 318 i
- 318 is

-40mm lower at the front
-40mm lower at the rear

Includes:
- 2 front shock absorber cartridges
- 2 rear shock absorbers
- 4 short springs

Remember to measure the diameter of yourstruts before ordering

Front and rear sport suspension kit complete with non-adjustable sport suspension for Volkswagen Polo 1 and Polo 2:

Polo 1 type 86 phase 1 and phase 2 :
- All models from 04/1975 to 09/1981

Polo 2 type 86C :
- All models from 10/1981 to 07/1990 (including GT G40)

Polo 2 type 2F:
- All models from 08/1990 to 07/1994 (including G40)

Kit includes :
- 2 oil-pressurized front sportshock absorber cartridges (strut mount, clamping collar included)
- 2 rear oil-pressurized sport shock absorbers (including adjustable lower cup)
- 2 front short springs for -60mm lowering
- 2 short rear springs for -40mm lowering

Rubber bumpers and dust covers not included.

Ideal for lowering your vehicle and optimizing handling without compromising comfort. Front cups and bearings are not included, but the kit is compatible with original parts.

Give your vehicle quality lowering and improved handling!

For BMW 3 Series E30 4 cylinders
except IX

Complete suspension kit:
- 4 shock absorbers for 45mm diameter struts
- 4 short springs. Front: -60mm / Rear: -60mm

MECATECHNIC selection complete front-rear sport suspension kit for BMW 3 series E30 6 cylinders with 51mm diameter struts and standard chassis.

Includes :
- 2 front sport shock absorbers
- 2 rear sport shock absorbers
- 2 front short springs -60mm
- 2 rear short springs -40mm

Fixed non-adjustable spring rate. Progressive coil springs. Ideal roadholding and a perfect compromise between sport and comfort.

WARNING: Not suitable for 325ix 4-wheel drive or M-Technic chassis!

Ideal for lowering your vehicle and optimizing handling without compromising comfort. The cups are not included, but the kit is compatible with the original ones.

This lowered suspension kit will perfectly enhance the sleek, sporty lines of your BMW E30!

Remember to measure the diameter of your strut to avoid ordering errors (there is a 45mm diameter strut assembly).

For E30:
- 316 i and318 i
- 318 is

-60mm lower at the front
-40mm lower at the rear

Includes:
- 2 front shock absorber cartridges
- 2 rear shockabsorbers
- 4 short springs

Remember to measure the diameter ofyour struts before ordering

Sport shock absorbers and lowering springs for Mercedes 190 type W201, engines 2.5 16s and 2.5 Turbo Diesel

Front/rear lowering: - 40mm

Includes:
- 2 front shock absorbers
- 2 rear shock absorbers
- 4 lowering springs
Comes without screws and bolts

SSP PRODUCTcomplete front and rearsuspension kit:- 4 short shock absorbers with adapted fixed hardness, threaded at the front- 4 short springs + 2 threaded rear cupsÂAllows adjustable lowering from -40mm to -70mm.Maximum axle load: Front axle 1710 Kg - Rear axle 1720 Kg
These suspension kits feature a high level of transverse force absorption and shock absorption for road and track roughness.This intelligent high-tech system preserves your vehicle's comfort, improves roadholding and adjusts its height with a wide range of settings to suit all tastes.This threaded kit is also a high-performance system; it's a set of high-tech parts essential to your vehicle, featuring top-quality materials and adjustment possibilities.Very high quality workmanship!
For VW Transporter T5, Multivan, Caravelle from 04/2003 onwardsCompatible with all petrol & diesel models, including 4-Motion (4x4) with PR codes (strut mounting brackets) :- 1BH, 1BQ, 2MQ, 2MR, 2MT, 2MU
Not compatible with vehicles with PR codes (strut mounting in hub carrier) :- 1BA, 2MF, 2MK- 1BB, 1BJ, 2MG, 2ML- 2MD
Warning: there are two different mountings, so be sure to compare your mounting before ordering. Your front shock absorber must fit into your hub and not be fixed with 2 screws (see PR codes).

For Golf 4 / Bora Saloon only, 1.4 and 1.6 petrol engines (except 4Motion)

Suspension kit:
- 4 shock absorbers
- 4 short springs: -50 / 40 mm

MTS Technik short spring kit front and rear lowering -45/-45mm for Audi A3 8P Sedan 3-door (8P1) and Sportback 5-door (8PA) phase 1 and phase 2 with standard chassis :

- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code AXX)
- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code BPY)
- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code BWA)
- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code CAWB)
- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code CCZA)
- 2.0 TDI 140hp phase 1 from 09/2004 to 03/2006 (engine code BKD)
- 2.0 TDI 140hp phase 1 from 04/2005 to 06/2008 (engine code BMM)
- 2.0 TDI 170hp phase 1 from 03/2006 to 04/2008 (engine code BMN)
- 2.0 TDI 170hp phase 1 from 03/2006 to 04/2008 (engine code BKQ)
- 2.0 TDI 170hp phase 1 from 03/2006 to 04/2008 (engine code BUY)
- 2.0 TDI 140hp phase 1 from 04/2005 to 06/2008 (engine code BMM)
- 2.0 TDI 140hp phase 2 from 04/2008 to 10/2012 (engine code CBAB)
- 2.0 TDI 140hp phase 2 from 04/2008 to 10/2012 (engine code CFFB)
- 2.0 TDI 170hp phase 2 from 04/2008 to 10/2012 (engine code CBBB)
- 2.0 TDI 170hp phase 2 from 04/2008 to 10/2012 (engine code CFGB)

ATTENTION: Not suitable for Quattro 4-wheel drive versions or for models equipped with level control!

This kit includes :
- 2 front springs for -45mm lowering
- 2 rear rear springs for -45mm lowering

Identical lowering of the front and rear axles increases driving precision and guarantees a sporty look without sacrificing comfort.

Beyond -40mm lowering, to maintain ride comfort and safety, we recommend using sport shock absorbers with short spring rods instead of the original shock absorbers.

MTS Technik short spring kit front and rear lowering -25/-25mm for Audi A3 8P Sportback 5-door (8PA) phase 1 and phase 2 with sport chassis or S-Line version :

- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code AXX)
- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code BPY)
- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code BWA)
- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code CAWB)
- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code CCZA)
- 2.0 TDI 140hp phase 1 from 09/2004 to 03/2006 (engine code BKD)
- 2.0 TDI 140hp phase 1 from 04/2005 to 06/2008 (engine code BMM)
- 2.0 TDI 170hp phase 1 from 03/2006 to 04/2008 (engine code BMN)
- 2.0 TDI 170hp phase 1 from 03/2006 to 04/2008 (engine code BKQ)
- 2.0 TDI 170hp phase 1 from 03/2006 to 04/2008 (engine code BUY)
- 2.0 TDI 140hp phase 1 from 04/2005 to 06/2008 (engine code BMM)
- 2.0 TDI 140hp phase 2 from 04/2008 to 10/2012 (engine code CBAB)
- 2.0 TDI 140hp phase 2 from 04/2008 to 10/2012 (engine code CFFB)
- 2.0 TDI 170hp phase 2 from 04/2008 to 10/2012 (engine code CBBB)
- 2.0 TDI 170hp phase 2 from 04/2008 to 10/2012 (engine code CFGB)

ATTENTION: Not suitable for Quattro 4-wheel drive versions or for models equipped with level control!

This kit includes :
- 2 front springs for -25mm lowering
- 2 rear springs for -25mm lowering
- TÜV certified

Identical lowering of the front and rear axles increases driving precision and guarantees a sporty look without sacrificing comfort.

These springs allow you to keep your original sport suspension shock absorbers.

Front/rear lowering: -40mm

Includes:
- 2 front shock absorbers
- 2 rear shock absorbers
- 4 short springs
Delivered without screws

For Golf 3 Cabriolet and Golf 4 Cabriolet,
1.9 TDi from 94 ->05/02

Front/rear lowering: -40mm

Includes:
- 2 front shock absorbers
- 2 rear shock absorbers
- 4 short springs
Delivered without screws

Complete Sport front and rear shock absorber kit:
- 4 H&R lowering springs -45/-50 mm
- 4 BILSTEIN B6 shock absorbers with high pressure gas
Top Quality German Assembly!

For VW Transporter T25/T3
Caravelle, Bus, Multivan, Joker
Years: 05/1979 -> 07/1992
All models excluding Syncro (4 x 4).

For E30:
- 316 i and 318 i
- 318 is

-60mmlower at the front
-40mm lower at the rear

Includes:
- 2 front shock absorber cartridges
- 2 rear shock absorbers
- 4 short springs

Remember to measure the diameter of your struts before ordering

Front and rear sport suspension kit complete with non-adjustable sport suspension for Volkswagen Polo 1 and Polo 2:

Polo 1 type 86 phase 1 and phase 2 :
- All models from 04/1975 to 09/1981

Polo 2 type 86C :
- All models from 10/1981 to 07/1990 (including GT G40)

Polo 2 type 2F:
- All models from 08/1990 to 07/1994 (including G40)

Kit includes :
- 2 oil-pressurized front sportshock absorber cartridges (strut mount, clamping collar included)
- 2 rear oil-pressurized sport shock absorbers (including adjustable lower cup)
- 2 front short springs for -60mm lowering
- 2 rear short springs for -60mm lowering

Rubber bumpers and dust covers not included.

Ideal for lowering your vehicle and optimizing handling without compromising comfort. Front cups and bearings are not included, but the kit is compatible with original parts.

Give your vehicle quality lowering and improved handling!

Sport suspension kit -40mm ST SUSPENSIONS for Bmw 3 Series :
Bmw 3 Series E30 Sedan :
- 320i 6cyl 125hp phase 1 from 01/1983 to 08/1985 (engine code M20B20)- 320i 6cyl 129hp phase 1 from 09/1985 to 08/1987 (engine code M20B20)- 320i 6cyl 129hp phase 2 from 09/1987 to 02/1991 (engine code M20B20)- 323i 6cyl 139hp phase 1 from 01/1983 to 08/1984 (engine code M20B23)- 323i 6cyl 150hp phase 1 from 09/1984 to 09/1986 (engine code M20B23)- 325e 6cyl 2.7L 122hp phase 1 from 01/1985 to 08/1987 (engine code M20B27)- 325i 6cyl 170hp phase 1 from 03/1985 to 08/1987 (engine code M20B25)- 325i 6cyl 170hp phase 2 from 09/1987 to 01/1991 (engine code M20B25)
Bmw 3 Series E30 Coupé :
- 320i 6cyl 125hp phase 1 from 01/1982 to 08/1985 (engine code M20B20)- 320i 6cyl 129hp phase 1 from 09/1985 to 08/1987 (engine code M20B20)- 320i 6cyl 129hp phase 2 from 09/1987 to 04/1991 (engine code M20B20)- 323i 6cyl 139hp phase 1 from 12/1981 to 08/1984 (engine code M20B23)- 323i 6cyl 150hp phase 1 from 09/1984 to 09/1986 (engine code M20B23)- 325e 6cyl 2.7L 122hp phase 1 from 01/1985 to 09/1987 (engine code M20B27)- 325i 6cyl 170hp phase 1 from 03/1985 to 08/1987 (engine code M20B25)- 325i 6cyl 170hp phase 2 from 09/1987 to 03/1991 (engine code M20B25)
Kit composition :
- 2 front sport shock absorbers - 2 rear sport shock absorbers- 2 front short springs -40mm- 2 rear short springs -40mm
The kits in the ST SUSPENSIONS range are made from high-quality materials, and the shock absorbers feature low-pressure twin-tube gas technology. They are combined with SPORT F progressive short springs for a more precise and safer ride.
As a performance part, this suspension kit is for track use only, and is not CE/TÜV-approved for use on open roads.
Remember to measure the diameter of your strut to avoid any ordering errors (a 45mm diameter strut assembly is available).

For E30:
- 316 i and 318 i
- 318 is

-40mm lower at the front
-40mm lower at the rear

Includes:
- 2 front shock absorber cartridges
- 2 rear shockabsorbers
- 4 short springs

Remember to measure the diameter of your struts before ordering

Kit 4 short shock absorbers for Bmw 3 Series: Bmw 3 Series E90 Sedan : - 325i 218hp from 06/2004 to 09/2008 (engine code N52B25)- 330i 258hp from 02/2004 to 08/2008 (engine code N52B30)- 318d 4cyl 2.0L 122hp from 02/2004 to 08/2007 (engine code M47D20TU2)- 318d 4cyl 2.0L 143hp from 02/2007 to 08/2008 (engine code N47D20)- 320d 4cyl 163hp from 02/2004 to 09/2007 (engine code M47D20TU2)- 320d 4cyl 177hp from 03/2007 to 09/2008 (engine code N47D20)- 325i 3.0L 218hp from 07/2007 to 12/2011 (engine code N53B30)- 318d 4cyl 2.0L 143hp from 11/2007 to 03/2010 (engine code N47D20)- 318d 4cyl 2.0L 143hp from 09/2009 to 10/2011 (engine code N47D20TU)- 320d ed 4cyl 163hp from 10/2009 to 11/2011(engine code N47D20TU)- 320d 4cyl 177hp from 07/2007 to 03/2010 (engine code N47D20)- 320d 4cyl 184hp from 09/2009 to 12/2011 (engine code N47D20TU) Kit includes : - 2 front sport shock absorbers- 2 rear sport shock absorbers- 4 short springs for -30mm front and -20mm rear lowering Note: - Shock absorbers are not included. You can use the original ones. - The shock absorber kit is not suitable for the sport chassis option code S226A and M Technic sport chassis option code S704A. - Not compatible with 4-wheel drive type ix models.

Suitable for all Polo 6N1 (excluding GTi, Classic and Variant)

Front/rear lowering: - 80/60 mm

Includes:
- 2 front shock absorbers
- 2 rear shock absorbers
- 4 short springs
Delivered without screws

Kit of 4 shock absorbers 4 springs Koni STR-T for:

- Mazda MX5 NA 1.6L
- Mazda MX5 NA 1.8L
- Front/rear lowering: 40mm
If the vehicle is already equipped with sports suspension, lowering may be less than specified