Spring and damper kit

MTS Technik short spring kit front and rear lowering -30/-30mm for Audi A3 8P Sportback 5-door (8PA) phase 1 and phase 2 with standard chassis :

- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code AXX)
- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code BPY)
- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code BWA)
- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code CAWB)
- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code CCZA)
- 2.0 TDI 140hp phase 1 from 09/2004 to 03/2006 (engine code BKD)
- 2.0 TDI 140hp phase 1 from 04/2005 to 06/2008 (engine code BMM)
- 2.0 TDI 170hp phase 1 from 03/2006 to 04/2008 (engine code BMN)
- 2.0 TDI 170hp phase 1 from 03/2006 to 04/2008 (engine code BKQ)
- 2.0 TDI 170hp phase 1 from 03/2006 to 04/2008 (engine code BUY)
- 2.0 TDI 140hp phase 1 from 04/2005 to 06/2008 (engine code BMM)
- 2.0 TDI 140hp phase 2 from 04/2008 to 10/2012 (engine code CBAB)
- 2.0 TDI 140hp phase 2 from 04/2008 to 10/2012 (engine code CFFB)
- 2.0 TDI 170hp phase 2 from 04/2008 to 10/2012 (engine code CBBB)
- 2.0 TDI 170hp phase 2 from 04/2008 to 10/2012 (engine code CFGB)

ATTENTION: Not suitable for Quattro 4-wheel drive versions or for models equipped with level control!

This kit includes :
- 2 front springs for -30mm lowering
- 2 rear springs for -30mm lowering
- TÜV certified

Identical lowering of the front and rear axles increases driving precision and guarantees a sporty look without sacrificing comfort.

Up to -40mm lowering, you can keep your original shock absorbers.

Suitable for all Polo 6N1 (excluding GTi, Classic and Variant)

Front/rear lowering: - 60/40 mm

Includes:
- 2 front shock absorbers
- 2 rear shock absorbers
- 4 short springs
Delivered without screws

MECATECHNIC selection complete front-rear sport suspension kit for BMW 3 series E30 6 cylinders with 51mm diameter struts and standard chassis.

Includes :
- 2 front sport shock absorbers
- 2 rear sport shock absorbers
- 2 front short springs -40mm
- 2 rear short springs -40mm

Fixed non-adjustable spring rate. Progressive coil springs. Ideal roadholding and a perfect compromise between sport and comfort.

WARNING: Not suitable for 325ix 4-wheel drive or M-Technic chassis!

Ideal for lowering your vehicle and optimizing handling without compromising comfort. The cups are not included, but the kit is compatible with the original ones.

This lowered suspension kit will perfectly enhance the sleek, sporty lines of your BMW E30!

Give your vehicle a quality lowering and improved handling!

Remember to measure the diameter of your strut to avoid any ordering errors (a 45mm diameter strut assembly is available).

Complete front + rear kit SSP PRODUCT :
- 4 short shock absorberswithfixed adapted hardness
- 2 shortrear springs + 2 threadedlowering mounts
Let you adjust the drop between -40 mm and -70 mm.
Very good valuefor money! (TÜV approved)
The front is lowered by adjusting the torsionbars.

For Transporter T4, Multivan, Caravelle, 09/1990 ->04/2003
All Petrol models & Diesel, including Syncro version (4 x 4).
Max. load: Front 1600 kg/Rear 1490 kg

Threaded suspension kit MTS TECHNIK for Volkswagen Transporter T4
For VOLKSWAGEN Transporter T4, Multivan, Caravelle from 09/1990 to 04/2003All petrol & diesel models, including Syncro version (4x4)Maximum load: Front 1600 kg / Rear 1490 kg
Height-adjustable shock absorbers from -25 to -70mmThe shock absorbers are twin-tube gas-hydraulic versions.Their setting is fixed, so their hardness cannot be adjusted.MTS factory-set dampers are firm, giving them a truly sporty feel.Shock absorber bodies are galvanized for corrosion resistance.Urethane shock absorber bumper
A guarantee of reliability, this MTS Technik kit is assembled with main springs developed and manufactured by EIBACH and is TÜV approved.

For Golf 2, all engines
(Not suitable for Syncro, Country or Rallye versions)

Front lowering: -80mm
Rear lowering: -60mm

Includes:
- 2 front shock absorbers
- 2 rear shock absorbers
- 4 short springs
Delivered without screws

For Golf 4 / Bora Saloon only, 1.4 and 1.6 petrol engines (except 4Motion)

Suspension kit:
- 4 shock absorbers
- 4 short springs: -40 / 40 mm

Would you like to improve the suspension of your VW Golf 4?
This kit, comprising 4 Bilstein B4 shock absorbers and 4 H&R short springs, will improve the handling and chassis dynamics of your Golf 4.
With a reasonable lowering of -35 mm, this kit is the right compromise between aesthetics, roadholding and comfort.
A tired suspension can be dangerous, as it can have a negative impact on roadholding and braking efficiency. A leaking shock absorber, significant asymmetry found at the roadworthiness test or a broken suspension spring are all reasons to refurbish these parts.
Compatible for Volkswagen Golf 4 Sedan in 2-wheel drive only, with manual or automatic gearbox:- 1.8, 1.8 Turbo, 2.0 and 2.3 VR5- 1.9 SDi- 1.9 TDi 90 ->150hpNot suitable for sport chassisNot suitable for Estate, 4Motion, Cabriolet or Bora
As suspension bearings and rubber bushes are subject to high stress, it is advisable to replace them at the same time, as well as shock absorber bumpers and dust covers.

Sport shock absorbers and lowering springs for Mercedes 190 type W201, engines 1.8, 2.0 Petrol and 2.0 Diesel

Front/rear lowering: - 45 mm

Includes:
- 2 front shock absorbers
- 2 rear shock absorbers
- 4 lowering springs
Comes without screws and bolts

Suspension kit including:
- 4 Sport shock absorbers
- 4 short springs: -45 / 30 mm

For E90 (except 4-wheel drive xi & xd)
- 318 d
- 320 d
- 323 i
- 325 i
- 328 i
- 330 i

Front and rear sport suspension kit complete with non-adjustable sport suspension for Volkswagen Polo 1 and Polo 2:

Polo 1 type 86 phase 1 and phase 2 :
- All models from 04/1975 to 09/1981

Polo 2 type 86C :
- All models from 10/1981 to 07/1990 (including GT G40)

Polo 2 type 2F:
- All models from 08/1990 to 07/1994 (including G40)

Kit includes :
- 2 oil-pressurized front sportshock absorber cartridges (strut mount, clamping collar included)
- 2 rear oil-pressurized sport shock absorbers (including adjustable lower cup)
- 2 front short springs for -80mm lowering
- 2 rear short springs for -60mm lowering

Rubber bumpers and dust covers not included.

Ideal for lowering your vehicle and optimizing handling without compromising comfort. Front cups and bearings are not included, but the kit is compatible with original parts.

Give your vehicle quality lowering and improved handling!

Suspension kit short springs and sport shock absorbers for VW Golf 1 -40 mm
The short springs in the sport kit will help you optimize the driving comfort of your VW Golf 1. Once installed, they will allow you to lower your vehicle's center of gravity by 40mm for a sportier character and look.
Compatible with the following models:- Golf 1 Sedan 3 or 5 doors including Golf GTI- Golf 1 Cabriolet including GLI- Jetta 1
Shock absorbers play a complementary role to springs, refining roadholding, braking efficiency and vehicle handling.
Changing shock absorbers is a costly operation, but crucial to the safety of the driver and passengers.
What's more, driving with a worn suspension precipitates the deterioration of other vehicle components, such as tires.
The short spring and sport shock absorber kit for Volkswagen Golf 1 consists of :- 2 front shock absorbers with struts- 2 rear shock absorbers with lower cups- 4 short springs -40mm
Screws not included
How can I tell if my springs and shock absorbers are worn?
Visually, you can easily spot signs of wear, such as hydraulic leaks or spring breakage.
Other negative consequences should not be overlooked:- Increased braking distances- Uneven roadholding- Noise or rattling when negotiating obstacles such as speed bumps

Suitable for:
- Golf 1 Saloon 3 and 5 door all models
- Golf 1 Cabriolet
- Jetta 1
- Scirocco 1 and 2

Front lowering: -60mm
Rear lowering: -40mm

Includes:
- 2 front shock absorbers (full struts)
- 2 rear shock absorbers
- 4 short springs
Delivered without screws

MECATECHNIC selection complete front-rear sport suspension kit for BMW 3 series E30 6 cylinders with 45mm diameter struts and standard chassis.

Includes :
- 2 front sport shock absorbers
- 2 rear sport shock absorbers
- 2 front short springs -40mm
- 2 rear short springs -40mm

WARNING: Not suitable for 325ix 4-wheel drive or M-Technic chassis!

Ideal for lowering your vehicle by -40mm and optimizing handling without compromising comfort. Cups are not included, but the kit is compatible with original ones.

Give your vehicle quality lowering and improved handling!

Remember to measure the diameter of your strut to avoid any ordering errors (struts with a diameter of 51mm are available).

For E30:
- 316 i and 318 i
- 318 is

-40mm lower at the front
-40mm lower at the rear

Includes:
- 2 front shock absorber cartridges
- 2 rear shock absorbers
- 4 short springs

Remember to measure the diameter of yourstruts before ordering

Sport shock absorbers and lowering springs for Mercedes 190 type W201, engines 2.5 16s and 2.5 Turbo Diesel

Front/rear lowering: - 40mm

Includes:
- 2 front shock absorbers
- 2 rear shock absorbers
- 4 lowering springs
Comes without screws and bolts

MECATECHNIC selection front rear sport suspension kit for BMW 3 series E30 4 cylinders with 51mm struts and standard chassis.

Includes :
- 2 front sport shock absorbers
- 2 rear sport shock absorbers
- 2 front short springs -40mm
- 2 rear short springs -40mm

WARNING: Not suitable for 325ix 4-wheel drive or M-Technic chassis!

Ideal for lowering your vehicle by -40mm and optimizing handling without compromising comfort. Cups are not included, but the kit is compatible with original ones.

Give your vehicle quality lowering and improved handling!

Remember to measure the diameter of your strut to avoid any ordering errors (a 45mm diameter strut assembly is available).

MECATECHNIC selection complete front-rear sport suspension kit for BMW 3 series E30 6 cylinders with 51mm diameter struts and standard chassis.

Includes :
- 2 front sport shock absorbers
- 2 rear sport shock absorbers
- 2 front short springs -60mm
- 2 rear short springs -40mm

Fixed non-adjustable spring rate. Progressive coil springs. Ideal roadholding and a perfect compromise between sport and comfort.

WARNING: Not suitable for 325ix 4-wheel drive or M-Technic chassis!

Ideal for lowering your vehicle and optimizing handling without compromising comfort. The cups are not included, but the kit is compatible with the original ones.

This lowered suspension kit will perfectly enhance the sleek, sporty lines of your BMW E30!

Remember to measure the diameter of your strut to avoid ordering errors (there is a 45mm diameter strut assembly).

For Golf 3 Saloon, Cabriolet and Vento,
from 10/91 ->08/94

(Not for TD, TDi, VR6, Estate and Syncro)

Front/rear lowering: -40mm

Includes:
- 2 front shock absorbers
- 2 rear shock absorbers
- 4 short springs for large cups of 110mm
Delivered without screws

MTS Technik short spring kit front and rear lowering -25/-25mm for Audi A3 8P Sportback 5-door (8PA) phase 1 and phase 2 with sport chassis or S-Line version :

- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code AXX)
- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code BPY)
- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code BWA)
- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code CAWB)
- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code CCZA)
- 2.0 TDI 140hp phase 1 from 09/2004 to 03/2006 (engine code BKD)
- 2.0 TDI 140hp phase 1 from 04/2005 to 06/2008 (engine code BMM)
- 2.0 TDI 170hp phase 1 from 03/2006 to 04/2008 (engine code BMN)
- 2.0 TDI 170hp phase 1 from 03/2006 to 04/2008 (engine code BKQ)
- 2.0 TDI 170hp phase 1 from 03/2006 to 04/2008 (engine code BUY)
- 2.0 TDI 140hp phase 1 from 04/2005 to 06/2008 (engine code BMM)
- 2.0 TDI 140hp phase 2 from 04/2008 to 10/2012 (engine code CBAB)
- 2.0 TDI 140hp phase 2 from 04/2008 to 10/2012 (engine code CFFB)
- 2.0 TDI 170hp phase 2 from 04/2008 to 10/2012 (engine code CBBB)
- 2.0 TDI 170hp phase 2 from 04/2008 to 10/2012 (engine code CFGB)

ATTENTION: Not suitable for Quattro 4-wheel drive versions or for models equipped with level control!

This kit includes :
- 2 front springs for -25mm lowering
- 2 rear springs for -25mm lowering
- TÜV certified

Identical lowering of the front and rear axles increases driving precision and guarantees a sporty look without sacrificing comfort.

These springs allow you to keep your original sport suspension shock absorbers.