Jacks

From chassis 1J-1-560 001->
- Golf 4 Saloon and Estate
- Bora Estate only

Boot strut, MEYLE Original quality, for Golf 4 and Bora from chassis 1J-1-560001->

Gas spring / strut to keep the bonnet open, for New Beetle:
- Saloon type 1C from chassis 1C-X-400001->
- Saloon type 9C from chassis 9C-X-900001->
- Cabriolet type 1Y

Boot gas spring for Passat Break type 3B5 and 3B6

Hood jack for Porsche 911 type 996 Carrera 4S Cabriolet from 2002 to 2005 :

- 996 phase 2 3.6 Carrera 4S from 2002 to 2005

The cylinder is sold individually , and two quantities are required per vehicle.

Ridex left rear trunkrelease for Bmw 5 Series:
- Compatible with all Bmw 5 Series E34 Touring versions from 11/1990 to 06/1996 including model 540i engine code m60.
Please note! There are 2 different models for left or right side.

Ridex right rear trunkrelease for Bmw 5 Series:
- Compatible with all Bmw 5 Series E34 Touring versions from 11/1990 to 06/1996 including model 540i engine code m60.
Please note! There are 2 different models for left or right side.

Pneumatic cylinder, original type for tailgate
Length: 570 mm
Pressure: 910 Nm
2 required per vehicle, sold per unit.

For VWTransporter T4 type 70
Multivan, Bus, Kombi, California
Years: 09/1990 ->07/1992
up to chassis No. ->70-N-151 781.
Models with pre-moulded coating,
with window wiper and heat-reflective glass.

Pneumatic cylinder, original type for tailgate
Length: 686 mm
Pressure: 910 Nm
2 required per vehicle, sold per unit.

For VW Transporter T4 type 70/7D
Multivan, Kombi, California, Syncro (4 x 4)
Years: 08/1992 ->06/2003
sincechassis no. 70-N-151 782->
Models with pre-moulded coating,
withwindowwiper and heat-reflective glass.

Original type gas strut for tailgate
Length: 686 mm
Pressure: 770 Nm
Requires 2 per vehicle, sold individually.
Economical version, good value for money

For VOLKSWAGEN Transporter T4 type 70 / 7D
Multivan, Bus, California, Syncro (4x4)
Years: 08/1992 ->06/2003
from chassis No. 70-N-151 782->
For models with rear wipers.

Original type gas strut for tailgate
Length: 755 mm
Pressure: 970 Nm
Requires 2 per vehicle, sold individually.

For VOLKSWAGEN Transporter T5 only Van or Bus

Original type gas strut for tailgate
Length: 755 mm
Pressure: 1080 N
Requires 2 per vehicle, sold individually.

For VOLKSWAGEN Transporter T5 only Multivan and Caravelle

For VOLKSWAGEN Transporter T5 from 2003 to 2015

For VOLKSWAGEN Transporter T6

Trunk jack for Porsche Panamera type 970 GTS, Turbo and Turbo S from 2010 to 2016 :

- 970 Panamera GTS - 4.8 430hp (4840) from 2012 to 2013
- 970 Panamera Turbo - 4.8 500hp (4870) from 2010 to 2013
- 970 Panamera Turbo S - 4.8 550hp (4870) from 2012 to 2013

- 970 Panamera GTS - 4.8 440hp (CXPA) from 2014 to 2016
- 970 Panamera Turbo - 4.8 520hp (CWBA) from 2014 to 2016
- 970 Panamera Turbo S - 4.8 570hp (CWCA) from 2014 to 2016

Please note: not suitable for Panamera equipped with power tailgate closure. This option can be found in the service booklet under option code 867.

The cylinder is sold individually and two quantities are required per vehicle.

Ridex hood jack for Bmw 1 Series:
- Compatible with all Bmw 1 Series F20 and F21 versions from 07/2010 to 06/2019.
Need 2 hood jacks for 1 vehicle.
Sold individually.

Rear hood jack for Porsche 911 type 991 from 2012 to 2016 :
- 991 Carrera - 3.4 350hp (A104) from 2012 to 2016- 991 Carrera 4 - 3.4 350hp (A104) from 2013 to 2016- 991 Carrera S - 3.8 400hp (A103) from 2012 to 2016- 991 Carrera 4 S - 3.8 400hp (A103) from 2013 to 2016- 991 Carrera GTS - 3.8 430hp (A103) from 2015 to 2016- 991 Carrera 4 GTS - 3.8 430hp (A103) from 2015 to 2016
The cylinder is sold individually , and two quantities are required for the rear hood.

Hood jack for Porsche 911 type 997 from 2005 to 2013 :
- 997 phase 1 3.6 Carrera 2 and 4 from 2005 to 2008- 997 phase 1 3.8 Carrera S and 4S from 2005 to 2008- 997 phase 2 3.6 Carrera 2 and 4 from 2009 to 2012- 997 phase 2 3.8 Carrera S and 4S from 2009 to 2012
- 997 3.8 Carrera 2 GTS from 2011 to 2012- 997 3.8 Carrera 4 GTS from 2012
- 997 3.6 Turbo from 2007 to 2009- 997 3.8 Turbo from 2010 to 2013- 997 3.8 Turbo S from 2010 to 2013
- 997 3.6 GT2 from 2008 to 2009

Rear hood jack for Porsche Boxster type 987 from 2005 to 2012 :
- 987 Boxster 2.7 - 240 hp (M96.25) from 2005 to 2006- 987 Boxster S 3.2 - 280 hp (M96.26) from 2005 to 2006- 987 Boxster 2.7 - 245 hp (M97.20) from 2007 to 2008- 987 Boxster S 3.4 - 295 hp (M97.21) from 2007 to 2008- 987 Boxster RS 60 Spyder 3.4 - 303 hp (M97.22) from 2008
- 987 Boxster 2.9 - 255 hp (MA1.20) from 2009 to 2012- 987 Boxster S 3.4 - 310 hp (MA1.21) from 2009 to 2012- 987 Boxster Spyder 3.4 - 320 hp (MA1.21) from 2010 to 2012

Ridextailgate jack for Peugeot 205 all models except cabriolet and utility vehicles
Sold individually
Fits all 3-door and 5-door models, including GTI and Rallye.
Not suitable for convertible or utility models.