Clutch release bearing

To Golf 1 Berline, Cabriolet & Jetta 1 : 
- 1.5 ->1.8 Gasoline, 70cv -> 112cv (JB / EG / DX)
- 1.6 Diesel & Turbo-Diesel,54cv & 70cv (CR / JK / CY)

For Golf 3 and Vento: 
- 1.4 60hp (AEX)
- 1.6 75hp (AEE), 1.6 101hp (AFT)
- 1.8 75/90hp (AAM / ABS / ADZ)
- 1.9 Diesel, TD & Sdi, 64hp-> 75hp (1Y / AAZ / AEY)
- 2.0 GTi 115hp (2E / AGG / ADY)

For A3 (8L):
- 1.6 101hp and 102hp (AEH, AKL, APF and AVU, BFQ)

Clutch release bearing for:
- MX5 NC and NCFL with 5 or 6 speed gearbox

Original MAZDA part.

For E36:
- 316 g / i
- 318 i / is / ti
- 318 tds
- 320 i
- 323 i / ti
- 325 td / tds
- 325 i
- 328 i

For E46:
- 316 i / Ci / ti
- 318 i / Ci / ti
- 318 d, 320 d
- 320 i / Ci
- 323 i / Ci
- 325 i /Ci / ti / Xi
- 328 i / Ci
- 330 i / Ci / xi

FEBI clutch release bearing for Bmw 6 Series:

Bmw E24 :

- 628 csi 184hp from 06/1979 to 05/1987 4-speed gearbox (engine code m30)
- 628 csi 184hp from 01/1984 to 05/1987 5-speed gearbox (engine code m30)
- 630 cs 185hp from 10/1975 to 08/1979 (engine code m30)
- 630 csi 174hp from 06/1976 to 09/1977 (engine code m30)
- 633 csi 200hp from 10/1975 to 12/1981 (m30 engine code)
- 635 csi 218hp from 12/1977 to 04/1989 (engine code m30)
- M635csi 286hp from 10/1983 to 02/1989 (engine code s38)
- M6 260hp from 07/1986 to 09/1988 (engine code s38)

FEBI clutch release bearing for Bmw 7 Series E38:

Bmw 7 Series E38 :

- 728i 6cyl 193hp from 10/1995 to 09/1998 (engine code m52b28)
- 728iL 6cyl 193hp from 10/1995 to 09/1998 (engine code m52b28)
- 728i 6cyl 193hp from 09/1998 to 07/2001 (engine code m52b28tu)
- 728iL 6cyl 193hp from 09/1998 to 07/2001 (engine code m52b28tu)
- 730i 8cyl 218hp from 07/1993 to 03/1996 (engine code m60b30)
- 730iL 8cyl 218hp from 05/1994 to 03/1996 (engine code m60b30)
- 735i 8cyl 236hp from 12/1994 to 07/2001 (engine code m62b35)
- 735iL 8cyl 236hp from 05/1995 to 07/2001 (engine code m62b35)
- 725Tds 6 cyl 143hp from 07/1995 to 02/2000 (engine code m51d25)

ATTENTION: Not compatible with Bmw 7 Series E38 740i engine code m60 and m62.

FEBIclutch release bearing for BMW 7 series E32 :

Bmw 7 Series E32 :

- 730i 6cyl 197hp from 07/1986 to 04/1994 (engine code m30b30)
- 730iL 6cyl 197hp from 12/1987 to 03/1994 (engine code m30b30)
- 730i 8cyl 218hp from 05/1991 to 04/1994 (engine code m60b30)
- 730iL 8cyl 218hp from 06/1992 to 03/1994 (engine code m60b30)
- 735i 6cyl 220hp from 10/1985 to 07/1992 (engine code m30b35)
- 735iL 6cyl 220hp from 06/1987 to 07/1992 (engine code m30b35)

FEBIclutch release bearing for Bmw E9: Bmw E9 : - 2.5 cs 6cyl 150hp from 10/1973 to 11/1975 (engine code m30)
- 3.0 cs 6cyl 180hp from 10/1973 to 11/1975 (engine code m30)
- 3.0 csi 6cyl 200hp from 10/1973 to 11/1975 (engine code m30)
- 3.0 csiL 6cyl 200hp from 01/1974 to 11/1975 (engine code m30) Caution! Not suitable for other 2800cs and 3.0 csl versions.

Febi clutchrelease bearing for Bmw 3 Series:
Bmw 3 Series E21 :
- 315 man. 1.6L 75hp from 11/1980 to 12/1983 (engine code M10B16)- 316 man. 1.6L 90hp from 02/1975 to 09/1980 (engine code M10B16)- 316 1.8L 90hp from 10/1980 to 09/1983 (engine code M10B18)- 318 98hp from 03/1975 to 07/1980 (engine code M10B18)- 318i 105hp from 10/1980 to 12/1983 (engine code M10B18i)- 320 4cyl 109hp from 02/1975 to 10/1982 (engine code M10B20)- 320i 4cyl 125hp from 03/1975 to 08/1978 (engine code M10B20i)
Bmw 3 Series E30 :
- 316 1.8L 90hp phase 1 from 03/1983 to 08/1987 (engine code M10B18)- 316i 1.8L 90hp phase 2 from 09/1987 to 07/1988 (engine code M10B18)- 316i 102hp phase 2 from 07/1987 to 12/1990 (engine code M40B16)- 318i 105hp phase 1 from 02/1983 to 08/1987 (engine code M10B18i)- 318i 115hp phase 2 from 09/1987 to 04/1991 (engine code M40B18i)- 320i 6cyl 125hp phase 1 from 01/1983 to 08/1985 (engine code M20B20)- 320i 6cyl 129hp phase 1 from 09/1985 to 08/1987 (engine code M20B20)- 320i 6cyl 129hp phase 2 from 09/1987 to 02/1991 (engine code M20B20)- 323i 6cyl 139hp phase 1 from 01/1983 to 08/1984 (engine code M20B23)- 323i 6cyl 150hp phase 1 from 09/1984 to 09/1986 (engine code M20B23)- 325e 6cyl 2.7L 122hp phase 1 from 01/1985 to 08/1987 (engine code M20B27)- 325i 6cyl 170hp phase 1 from 03/1985 to 08/1987 (engine code M20B25)- 325i 6cyl 170hp phase 2 from 09/1987 to 01/1991 (engine code M20B25)- 325ix 6cyl 170hp phase 1 from 11/1985 to 08/1987 (engine code M20B25)- 325ix 6cyl 170hp phase 2 from 09/1987 to 12/1990 (engine code M20B25)- 324d 6cyl 86hp phase 1 from 04/1985 to 08/1987 (engine code M21D24)- 324d 6cyl 86hp phase 2 from 09/1987 to 12/1990 (engine code M21D24)- 324td 6cyl 115hp phase 2 from 02/1987 to 12/1990 (engine code M21D24)

For E12:
- 518 i 1.8 and 2.0 engines

For E28:
- All models

For E34:
- 518 g / i
- 520 i
- 524 td
- 525 td / tds
- 525 i / ix
- 530 i
- 535 i

For E39:
-520 d
- 520, 523. 525, 528, 530 and 535 i
- 525 td / tds

This SKF clutch shift for Renault 4 (02/1965-12/1993) is true to the original.

This clutch shift ball for R4 is a quality reproduction. It is compatible with all models from the 1968 vintage on.

Compatible models:

- R4 type R1120 : 08/1968 to 09/1971
- R4 type R1123 : 08/1968 to 05/1986
- R4 Export/L/TL type R1126 : 09/1971 to 07/1982
- R4 Safari type R1129 : 09/1975 to 07/1978
- R4 GTL type R1128: 10/1977 to 12/1993
- R4 Savane type R112C : 09/1986 to 12/1992

- R4 4HP van R2105 : 08/1968 to 09/1971
- R4 5HP van type R2106 : 08/1968 to 05/1986
- R4 Elevated van type R2108 : 10/1972 to 07/1975
- R4 4HP van F4 type R2109: 09/1971 to 07/1982
- R4 Van F4 type R2391: 09/1972 to 05/1986
- R4 Van 4HP glazed F4 type R2392: 09/1973 to 07/1982
- R4 Extended van F6 type R2370: 05/1975 to 11/1985
- R4 F6 Pick up type 3C2370: 07/1978 to 11/1985
- R4 Long van glazed R2430: 05/1975 to 07/1978
- R4 F4 type R210B: 09/1981 to 05/1990
- R4 F4 station wagon type 239B: 09/1981 to 05/1990

FEBI clutch release bearing for Bmw E3 : Bmw E3 : - 2.8L 6cyl 170hp from 12/1974 to 02/1977 (engine code m30)
- 2500 6cyl 150hp from 09/1973 to 02/1977 (engine code m30)
- 2800 6cyl 170hp from 09/1973 to 02/1975 (engine code m30)
- 3.0L 6cyl 180hp from 12/1974 to 02/1977 (engine code m30)
- 3.0S 6cyl 180hp from 09/1973 to 02/1977 (engine code m30)
- 3.0Bav 6cyl 180hp from 09/1973 to 07/1974 (engine code m30)
- 3.0si 6cyl 200hp from 09/1973 to 02/1977 (engine code m30)
- 3.3L 6cyl 190hp from 10/1973 to 08/1975 (engine code m30)
- 3.3Li 6cyl 200hp from 07/1975 to 02/1977 (engine code m30) Warning! Not suitable for Bmw E3 versions prior to 09/1973.

FEBI clutch release bearing for Bmw 7 Series:

Bmw E23 :

- 728 6cyl 170hp from 04/1977 to 09/1979 (engine code m30b28)
- 728i 6cyl 184hp from 07/1977 to 05/1986 (engine code m30b28)
- 728is 6cyl 184hp from 03/1981 to 04/1986 (engine code m30b28)
- 730 6cyl 184hp from 10/1976 to 12/1977 (engine code m30b30)
- 732i 6cyl 197hp from 05/1979 to 05/1986 (engine code m30b32)
- 733i 6cyl 197hp from 10/1976 to 07/1982 (engine code m30b32)
- 735i 6cyl 218hp from 05/1979 to 06/1986 (engine code m30b34)

Clutch release bearing 915 for Porsche 911 type G from 1974 to 1986 :
- 911 2.7 from 1974 to 1977- 911 S 2.7 from 1974 to 1977- 911 Carrera 2.7 from 1974 to 1976- 911 Carrera 3.0 from 1976 to 1977- 911 SC 3.0 from 1978 to 1983- 911 Carrera 3.2 from 1984 to 1986

This VALEO clutch release bearing with spring for Mehari after 1982 is of high quality.

For Mehari models with a 602cc engine from 1982 onwards, this VALEO clutch release bearing is of the same quality as the original and guarantees first class durability.

We recommend that you use a quality disc and mechanism with this bearing.

This VALEO clutch release bearing with spring for DYANE and Acadiane after 1982 is of high quality.

For DYANE and Acadiane with a 602cc engine from 1982 onwards, this VALEO clutch release bearing is of the same quality as the original and guarantees first class durability.

We recommend that you use a quality disc and mechanism with this stop.

Clutch release bearing 915 for Porsche 911 type F from 1970 to 1973 :
- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973- 911 2.7 Carrera RS from 1973

This VALEO clutch release bearing with spring for 2cv models after 1982 is of high quality.

For 2cv and derivatives with a 602cc engine from 1982 onwards, this VALEO clutch release bearing is of the same quality as the original and guarantees first class durability.

We recommend that you use a quality disc and mechanism with this stop.

Clutch release bearing guide 915 for Porsche 911 type G from 1974 to 1983 :
- 911 2.7 from 1974 to 1977- 911 S 2.7 from 1974 to 1977- 911 Carrera 2.7 from 1974 to 1976- 911 Carrera 3.0 from 1976 to 1977- 911 SC 3.0 from 1978 to 1983