Engine gasket set

This complete set of gaskets for Citroën Traction Avant 15/6 (02/1938-10/1956 ) is a high quality remanufacture.


These engine gaskets for Citroën Traction Avant 15CV are complete. It allows the remanufacturing of a 15 G or 15D engine.
Included in the kit:
- cylinder head gasket - brass 2mm
- rocker cover gasket - cork 3mm
- lower crankcase gasket - cork 3mm
- lower pan cover gasket - paper 1mm
- timing cover gasket - 0.5mm paper
- rear bearing cap side gasket - 3mm cork
- manifold gaskets - brass and paper 2mm
- engine block vent tube gasket - paper
etc. ...


dipstick support gasket

Compatible models:

- Traction Avant 15 Six Berline 15CV, type 15/6G from 02/1938 to 02/1940, Engine, type 16cv 15G 2867cc (77cv)
- Traction Avant 15 six Cabriolet 15HP, type 15/6G from 02/1938 to 02/1940, Engine, type 16hp 15G 2867cc (77hp)
- Traction Avant 15 Six Conduite intérieure 15CV rallongée, type 15/6G de 04/1939 à 02/1940, Moteur, type 16cv 15G 2867cc (77cv)
- Traction Avant 15 Six Familiale 15CV rallongée, type 15/6G de 04/1939 à 02/1940, Moteur, type 16cv 15G 2867cc (77cv)
- Traction Avant 15 Six Berline 15CV, type 15/6G from 06/1946 to 05/1947, Engine, type 16cv 15G 2867cc (77cv)
- Traction Avant 15 six Cabriolet 15HP, type 15/6G from 04/1946, Engine, type 16hp 15G 2867cc (77hp)
- Traction Avant 15 Six Berline 15CV, type 15/6D from 06/1947 to 08/1955, Engine, type 16cv 15D 2867cc (77cv)
- Traction Avant 15 Six Familiale 15CV rallongée, type 15/6D de 10/1953 à 08/1954, Moteur, type 16cv 15D 2867cc (77cv)
- Traction Avant 15 Six Berline Hydraulique 15CV, type 15/6H from 04/1954 to 07/1956, Engine, type 16cv 15D 2867cc (77cv)
- Traction Avant 16 Six Limousine Présidentielle Hydraulique 15CV rallongée, type 15/6H de 10/1956, Moteur, type 16cv 15D 2867cc (77cv)

Complete set of crankcase seals for Volkswagen Jetta 1:

- 1.5L 69hp from 08/1979 to 02/1984 (engine code JB)
- 1.6L 86hp from 08/1979 to 02/1984 (engine code FR)
- 1.6L 110hp from 08/1979 to 07/1982 (engine code EG)
- 1.6D 54hp from 08/1980 to 02/1984 (engine code CR)
- 1.6D 54hp from 08/1982 to 02/1984 (engine code JK)
- 1.6TD 54hp from 08/1981 to 02/1984 (engine code CY)

Kit includes crankshaft oil seal.

When disassembling the crankcase, be sure to clean the gasket surfaces on the crankcase and on the engine to avoid over-thickness, which could lead to further leaks.

For 30 bhp engine
Capacity: 1,192 cc

For Beetle:
- Classic 12/1953 ->07/1960
- Standard 12/1953 ->07/1965

Gasket kit for :
- 356 Pre-A from 1950 to 1955- 356 A from 1956 to 1959- 356 B from 1960 to 1963- 356 C from 1964 to 1965
- 912 1.6 from 1965 to 1969

Engine gasket kit for Renault 15

For Renault 15 :
- Renault 15 TS (R1302) from 03/1971 to 01/1976 - Cléon-Alu 1565cm3 90hp (807-10)

Complete gasket kit for upper and lower engine
Original quality

This oil pan gasket pack for Renault 4 (10/1972-12/1993)- 1108cc is true to the original.

This oil pan gasket for R4 in 5 pieces is compatible with Renault 4 and Vans with 1108cc Cleon engine Type 688-10, 688-11, 688- D7, 688-712 , 689, C1C and C1E

- R4 GTL type R1128 : 01/1978 to 12/1993
- R4 Elevated van type R2108 : 10/1972 to 07/1975
- R4 Extended van F6 type R2370 : 05/1975 to 11/1985
- R4 F6 Pick up type 3C2370 : 07/1978 to 11/1985

This complete engine gasket kit for Alpine A110 V85 Berlinette (10/1969-12/1976) - 1289cc is true to original.

This engine gasket kit for Alpine A110 V85 is compatible with 1300 berlinettes with type 810 engines. It includes all the gaskets needed to rebuild an engine.

Compatible models:

- Berlinette A110 V85/1300 - type 1300 VC (10/1969-12/1976)

This engine gasket kit for Alpine A110 Berlinette 1300G (01/01967-06/1971) - 1255cc is delivered without the head gasket.

These engine gaskets for Alpine A110 1300G Type 1300VA are specific to the 1300G model with a 1255cc engine derived from the Renault 8 Gordini. The kit does not include the head gasket.

It includes crankshaft and camshaft seals, water and fuel pump seals, oil sump seals, exhaust and intake manifold seals, etc. ...

Compatible model:
- Berlinette A110 1300 G - type 1300 VA (01/01967-06/1971)

Engine seal set of German quality for Porsche Boxster 986 :

- 986 2.5 Boxster - 204 hp (M96.20) from 1997 to 1999
- 986 2.7 Boxster - 220 hp (M96.22) from 2000 to 2002
- 986 2.7 Boxster - 228 hp (M96.23) from 2003 to 2004
- 986 3.2 Boxster S - 252 hp (M96.21) from 2000 to 2002
- 986 3.2 Boxster S - 260 hp (M96.24) from 2003 to 2004
- 986 3.2 Boxster S550 - 266 hp (M96.24) from 2003 to 2004

Without cylinder head gaskets.

Engine seal set of German quality for Porsche 911 type 996 :

- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera from 1998 to 2001
- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera 4 from 1998 to 2001
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4S from 2002 to 2005

Without cylinder head gaskets.

Victor Reinz enginegasket kit for 30hp "pied moulé" type for VW Combi Split up to 07/1961.Displacement 1192cm3

This engine gasket kit for Renault 4 (05/1975-07/1989) - Cléon is complete.
This engine gasket kit for 4L is compatible with R4 with 956 and 1108cc engines.- Bore: 65mm, 70mm

Cleon Type 813-12, 688-10, 688-11, 688- D7, 688-712 , 689, 842, C1C and C1E engines.

Compatible models:
- R4 GTL type R1128 : 01/1978 to 12/1993
- R4 Savane type R112C : 09/1986 to 12/1993
- R4 Extended van F6 type R2370 : 05/1975 to 11/1985
- R4 F6 Pick up type 3C2370: 07/1978 to 11/1985
- R4 Long glass van R2430: 05/1975 to 07/1978
- R4 F4 type R210B: 09/1981 to 05/1990
- R4 F4 station wagon type 239B: 09/1981 to 05/1990

This engine gasket kit for Renault 4 (04/1962-07/1989) - Billancourt is complete.
This 4L engine gasket kit is compatible with R4 models with 746, 782 and 845cc engines. Bore: 49; 54.5; 55.8 and 58mm

engines Type 680-01, 680-02, 680-702, 800-01, 800-02, 800-03, 800-05, B1B-707 and B1B D7-07.
Type 680-01, 680-02 and 680-702.

Compatible models:
- R4 type R1120 : 10/1961 to 09/1971
- R4 super type R1122 : 03/1962 to 09/1962
- R4 type R1123 : 12/1963 to 05/1986
- R4 super type R1124 : 09/1962 to 12/1963

- R4 4CV van R2102: 10/1961 to 03/1966
- R4 Fourgonnette 4CV R2105 : 03/1966 to 09/1971
- R4 Fourgonnette 4CV type R2104 : 02/1965 to 03/1966
- R4 5CV van type R2106 : 03/1966 to 05/1986
- R4 F4 van type R2391 : 09/1972 to 05/1986

Cette pochette de joints moteur pour Renault 4 Savane (09/1986-07/1992) - Cléon C1C - 956cc est complète.

Cette pochette de joints pour R4 Savane est spécifique au modèle et à son moteur type C1C-08 de 956cc.

Modèles compatibles:
- R4 Savane type R112C : 09/1986 à 12/1993

This bag include all the seals needed to reassemble your block (engine base), crankcase, water pump, flange, SPI .. Original German quality.

For Transporter T25/T3, 01/1981 ->07/1992
- 1600 Diesel 50 hp (CS)
- 1600 Turbo-Diesel 70 hp (JX)
- 1700 Diesel 57 hp (KY)

Called running-in bag, includes all the seals you need to reassemble your cylinder head: valve stem, manifold (admission and exhaust) and cylinder head cover seals. (except cylinder head gasket to choose according to thickness). ELRING quality .

For VW Transporter T4, Multivan,
California, Campmobil
Years: 09/1990 ->07/1994
up to chassis ->70-R-160 000.
Engine: 2.4 Diesel 78hp (AAB)

Called running-in bag, includes all the seals you need to reassemble your cylinder head: valve stem, manifold(admission and exhaust) and cylinder head cover seals. (except cylinder head gasket to choose according to thickness).

For Transporter T4, Multivan,
California, Campmobil
Engines:
- 1.9 Diesel 60hp (1X)
Years: 09/1990 ->12/1995
- 1.9 Turbo-Diesel 68hp (ABL)
Years: 08/1992->04/2002

Complete gasket kit with engine steering wheel oil seal. Original German quality.

For VW Transporter T3/T25
Van, Bus, Caravelle, Westfalia
Years: 05/1979 -> 12/1982
Petrol engine: 1600cc50hp type CT

For Transporter T3 05/1979->
with 2000cc engine type CU - CV

Engine gasketkit for BMW 3 series at 2.0l and 2.3l M20 petrol engines:
E30 Sedan 4 doors :
- 320i 6cyl 125hp phase 1 from 01/1983 to 08/1985 (engine code M20B20)- 320i 6cyl 129hp phase 1 from 09/1985 to 08/1987 (engine code M20B20)- 320i 6cyl 129hp phase 2 from 09/1987 to 02/1991 (engine code M20B20)- 323i 6cyl 139hp phase 1 from 01/1983 to 08/1984 (engine code M20B23)- 323i 6cyl 150hp phase 1 from 09/1984 to 09/1986 (engine code M20B23)
E30 2-door Coupé :
- 320i 6cyl 125hp phase 1 from 01/1982 to 08/1985 (engine code M20B20)- 320i 6cyl 129hp phase 1 from 09/1985 to 08/1987 (engine code M20B20)- 320i 6cyl 129hp phase 2 from 09/1987 to 04/1991 (engine code M20B20)- 323i 6cyl 139hp phase 1 from 12/1981 to 08/1984 (engine code M20B23)- 323i 6cyl 150hp phase 1 from 09/1984 to 09/1986 (engine code M20B23)
E30 Touring :
- 320i 6cyl 129hp from 01/1988 to 04/1991 (engine code M20B20)
E30 Cabriolet :
- 320i 6cyl 129hp from 04/1986 to 01/1993 (engine code M20B20)
Valve stem gaskets included.
This complete quality gasket kit will enable you to refurbish thesealing of the upper part of your engine block.