Engine gasket set

For Golf 3:
- 1.9 TDi 90hp (1Z, AHU, ALE) from 11/95->
- 1.9 TDi 110hp (AFN) from 11/95->

For Passat 3:
- 1.9 TDi 90hp (1Z, AHU, ALE) from 11/95->
- 1.9 TDi 110hp (AFN) from 11/95->

For Polo 6N:
- 1.9 SDi 64hp (AGD) from 07/96 ->09/91

For Golf 4:
- 1.6 100hp (AEH, AKL, APF)

For Polo 6N:
- 1.3 54hp (ADX)

For Polo 6N:
- 1.4 60hp (AEX, APQ, AKV)
- 1.6 75hp (AEE, AEA)

Suitable for :
- E36 325 i M50 until ->09/92- E34 525 i/ix M50 until ->09/92

Engine top gasket kit JP GROUP for Volkswagen Corrado
For VW Corrado :- 2.9 VR6 190hp (ABV up to engine no. 014 000)
This lapping kit contains all the gaskets you need to reassemble your cylinder head: head gasket, valve stem gasket, manifold gasket (intake and exhaust) and rocker cover gasket.

Bag of engine crankcase seals for Porsche 911 and 930 3.0 Turbo :

- 911 Carrera RS 2.7 - 210 hp (911.83) of 1973
- 911 2.7 - 150 hp (911.92/97/41/46) from 1974 to 1975
- 911 S 2.7 - 175 hp (911.93/98/42/47) from 1974 to 1975
- 911 2.7 - 165 hp (911.81/86) from 1976 to 1977
- 911 Carrera 2.7 - 210 hp (911.83) from 1974 to 1976
- 911 Carrera 3.0 - 200 hp (930.02/12) from 1976 to 1977
- 911 Turbo 3.0 - 260 hp (930.50/52) from 1975 to 1977

VICTOR REINZ Set of head engine seals for Porsche 911 Carrera 3.0 and 3.0 SC :

- 911 Carrera 3.0 - 200 hp (930.02/12) from 1976 to 1977
- 911 SC 3.0 - 180 hp (930.03/13) from 1978 to 1979
- 911 SC 3.0 - 188 hp (930.09/19) of 1980
- 911 SC 3.0 - 204 hp (930.10) from 1981 to 1983

VICTOR REINZ Bag of engine bottom seals for Porsche 911 and 930 3.3 Turbo :

- 911 SC 3.0 - 180 hp (930.03/13) from 1978 to 1979
- 911 SC 3.0 - 188 hp (930.09/19) of 1980
- 911 SC 3.0 - 204 hp (930.10) from 1981 to 1983
- 911 Carrera 3.2 - 231 hp (930.20) from 1984 to 1986
- 911 Carrera 3.2 - 207 hp (930.21) from 1985 to 1986
- 911 Carrera 3.2 G50 - 231 hp (930.20) from 1987 to 1989
- 911 Carrera 3.2 G50 - 217 hp (930.25) from 1987 to 1989
- 911 Carrera CS - 231 hp (930.20) from 1987 to 1988
- 911 Carrera CS - 217 hp (930.25) from 1987 to 1988
- 911 Speedster 3.2 - 231 hp (930.20) of 1989
- 911 Speedster 3.2 - 217 hp (930.25) of 1989
- 911 Turbo 3.3 - 300 hp (930.60/66) from 1978 of 1989

VICTOR REINZ Set of head engine seals for Porsche 911 Turbo 3.3 :

- 911 Turbo 3.3 - 300 hp (930.60/66) from 1978 to 1989

VICTOR REINZ complete set of head engine seals for Porsche 911 2.2 T :

- 911 T 2.2 - 125 cv (911.03/06) from 1970 to 1971

VICTOR REINZ complete set of head engine seals for Porsche 911 2.2 E and S and Porsche 911 2.4 E and S :

- 911 E 2.2 - 155 hp (911.01/04) from 1970 to 1971
- 911 S 2.2 - 180 hp (911.01) from 1970 to 1971
- 911 E 2.4 - 165 hp (911.52/62) from 1972 to 1973
- 911 S 2.4 - 190 hp (911.53/63) from 1972 to 1973

Bag of engine-top seals for:
- 964 3.6 from 07/1989 to 09/1993

Bag of cylinder head cover seals for:
- 964 3.6 from 08/1989 to 07/1993

Complete top engine gasket kit for Mazda MX-5 NA:

- NA 1.6 all engines
- NB 1.6
- NBFL 1.6

To completely re-seal your cylinder head

Engine gasket kit for Simca 1100 Special 1294cm3 (1972-1981)

This engine gasket kit for your Simca 1100 will allow you to replace aging gaskets and regain a factory-like seal.

Simca 1100 Special 1294cm3 (1972-1981)

This super complete engine gasket kit GLASER for 602cc engines is compatible with all 2cv models and derivatives with 602cc engines

A complete GLASER quality kit, it includes all the gaskets required to rebuild a 602cc engine

- a choice of 2 types of gaskets: 2 flat gaskets (70->78) and 2 double lip gaskets with notch (78->)
- 1 front crankshaft seal - 30x42x8 mm
- 1 rear crankshaft seal for 602 engine - 56x69x10 mm
(With the exception of this seal, the kit is compatible with a 435cc engine, add 1 CV10772 gasket for this displacement)
- 1 oil breather seal
- 2 inlet seals
- 2 exhaust gaskets
- 2 rocker arm cover seals
- 4 valve stem seals
- 1 large oil pump O-ring
- 1 can tail centring seal
- 3 double copper seals for the oil circuit
- 2 copper seals for engine drain
- 2 copper gasket for can drain
- 1 Oil pump seal
- 2 refrigerator seals
- 2 paper seals 6 cardan holes

This super complete engine gasket kit GLASER for 2CV Vans with 602cc engines is compatible with all 2cv models and derivatives with 602cc engines

A complete GLASER quality kit, it includes all the gaskets required to rebuild a 602cc engine

- a choice of 2 types of gaskets: 2 flat gaskets (70->78) and 2 double lip gaskets with notch (78->)
- 1 front crankshaft seal - 30x42x8 mm
- 1 rear crankshaft seal for 602 engine - 56x69x10 mm
(With the exception of this seal, the kit is compatible with a 435cc engine, add 1 CV10772 gasket for this displacement)
- 1 oil breather seal
- 2 inlet seals
- 2 exhaust gaskets
- 2 rocker arm cover seals
- 4 valve stem seals
- 1 large oil pump O-ring
- 1 can tail centring seal
- 3 double copper seals for the oil circuit
- 2 copper seals for engine drain
- 2 copper gasket for can drain
- 1 Oil pump seal
- 2 refrigerator seals
- 2 paper seals 6 cardan holes

This GLASER exhaust gasket for DYANE and Acadiane models with 602cc engines is compatible with all DYANE and Acadiane vehicles with 602cc engines.

A complete GLASER quality kit, it includes all the gaskets required to rebuild a 602cc engine

- a choice of 2 types of gasket: 2 flat gaskets (70->78) and 2 double lip gaskets with notch (78->)
- 1 front crankshaft seal - 30x42x8 mm
- 1 rear crankshaft seal for 602 engine - 56x69x10 mm
(With the exception of this seal, the kit is compatible with a 435cc engine, add 1 CV10772 gasket for this displacement)
- 1 oil breather seal
- 2 inlet seals
- 2 exhaust gaskets
- 2 rocker arm cover seals
- 4 valve stem seals
- 1 large oil pump O-ring
- 1 gearbox tail centring seal
- 3 double copper seals for the oil circuit
- 2 copper seals for engine drain
- 2 copper gasket for can drain
- 1 Oil pump seal
- 2 refrigerator seals
- 2 paper seals 6 cardan holes

This super complete engine gasket kit GLASER for Mehari is compatible with all Meharis.

A complete GLASER quality kit, it includes all the gaskets required to rebuild a 602cc engine

- a choice of 2 types of gasket: 2 flat gaskets (70->78) and 2 double lip gaskets with notch (78->)
- 1 front crankshaft seal - 30x42x8 mm
- 1 rear crankshaft seal for 602 engine - 56x69x10 mm
(With the exception of this seal, the kit is compatible with a 435cc engine, add 1 CV10772 gasket for this displacement)
- 1 oil breather seal
- 2 inlet seals
- 2 exhaust gaskets
- 2 rocker arm cover seals
- 4 valve stem seals
- 1 large oil pump O-ring
- 1 gearbox tail centring seal
- 3 double copper seals for the oil circuit
- 2 copper seals for engine drain
- 2 copper gasket for can drain
- 1 Oil pump seal
- 2 refrigerator seals
- 2 paper seals 6 cardan holes