Clutch transmitter and receiver

Hydraulic clutch slave cylinder for VW LT from 1996 to 2006 :
- 2.3 Petrol 143hp (AGL)
- 2.8 Petrol 158hp (BCQ)
- 2.5 SDi 75hp (AGX)
- 2.5 TDi 83hp (BBE)
- 2.5 TDi 90hp (APA)
- 2.5 TDi 95hp (BBF)
- 2.5 TDI 102hp (AHD)
- 2.5 TDi 109hp (ANJ, AVR)
- 2.8 TDi 125hp (AGK) up to chassis no. 2D-X-008666
- 2.8 TDi 131hp (ATA) up to chassis n°2D-X-008666
- 2.8 TDi 158hp (AUH)

Hydraulic clutch master cylinder for VW LT from 1996 to 2006 :
- 2.3 Petrol 143hp (AGL)
- 2.8 Petrol 158hp (BCQ)
- 2.5 SDi 75hp (AGX)
- 2.5 TDi 83hp (BBE)
- 2.5 TDi 90hp (APA)
- 2.5 TDi 95hp (BBF)
- 2.5 TDI 102hp (AHD)
- 2.5 TDi 109hp (ANJ, AVR)
- 2.8 TDi 125hp (AGK)
- 2.8 TDi 131hp (ATA)
- 2.8 TDi 158hp (AUH)

FEBI hydraulic clutch receiver for Bmw 6 Series E63:

Bmw E63 :

- 630i 6 cyl 258hp from 02/2004 to 07/2007 (engine code n52b30a)
- 650i 8 cyl 367hp from 02/2005 to 07/2007 (engine code n62n48b)
- 630i 6 cyl 272hp from 04/2006 to 07/2010 (engine code n53b30a)
- 630i 6 cyl 258hp from 05/2006 to 07/2010 (engine code n52b30n)
- 650i 8 cyl 367hp from 04/2006 to 07/2010 (engine code n62b48b)

Bmw E64 :

- 630i 6 cyl 258hp from 03/2004 to 07/2007 (engine code n52b30a)
- 650i 8 cyl 367hp from 02/2005 to 07/2007 (engine code n62b48b)
- 630i 6 cyl 272hp from 04/2006 to 07/2010 (engine code n53b30a)
- 630i 6 cyl 258hp from 05/2006 to 07/2010 (engine code n52b30n)
- 650i 8 cyl 367hp from 04/2006 to 07/2010 (engine code n62b48b)

Caution! Not suitable for Bmw 645i engine code n62b44a.

Emetteur d'embrayage FEBI pour BMW série 5 E34 :

- Tous modèles (sauf M5)

Fluid clutch master cylinder.
OriginalQuality.

For VW Transporter T4, Engines:
- 2.5 TDI (ACV) & 2.8 VR6 (AES), 01/1996 ->06/2003
- 1.9 ->2.5 Petrol & Diesel, 02/1997 ->06/2003

Buffer stop for fluid clutch control

For Transporter T4, 01/1996 ->06/2003
Chassis no. 70-T-200 001 ->70-3-200 000.
- 2.5 TDi 5 cylinders 88hp (AYY)
- 2.5 TDi 5 cylinders 102hp (ACV, AUF, AYC, AXL)
- 2.5 TDi 5 cylinders 151hp (AHY, AXG)
- 2.8 Petrol 6 cylinders 140hp (AES)

Mechanical clutch fork control for Volkswagen Transporter T4
For VW T4 all models with mechanical clutch control (not hydraulic)
This control lever pushes the clutch fork, acting as a mechanical clutch receiver .
Original Volkswagen part

Clutch hose for Mercedes Pagode

For Mercedes SL W113 Pagode:
- 250 SL (113.043) from 12/1966 to 01/1968
- 280 SL (113.044) from 01/1968 to 03/1971

This clutch hose is located on the hydraulic control circuit between the clutch sender and receiver. A damaged or porous clutch hose will make it difficult to operate the clutch pedal and may cause hydraulic fluid leaks.

JP GROUP hydraulic clutch emitter for Volkswagen Golf 5
For VW Golf 5 : - All 5- and 6-speed gearbox models

FEBI clutch receiver for Bmw 7 Series E38 :

Bmw 7 Series E38 :

- 728i 6cyl 193hp from 10/1995 to 09/1998 (engine code m52b28)
- 728iL 6cyl 193hp from 10/1995 to 09/1998 (engine code m52b28)
- 728i 6cyl 193hp from 09/1998 to 07/2001 (engine code m52b28tu)
- 728iL 6cyl 193hp from 09/1998 to 07/2001 (engine code m52b28tu)
- 730i 8cyl 218hp from 07/1993 to 03/1996 (engine code m60b30)
- 730iL 8cyl 218hp from 05/1994 to 03/1996 (engine code m60b30)
- 735i 8cyl 236hp from 12/1994 to 07/2001 (engine code m62b35)
- 735iL 8cyl 236hp from 05/1995 to 07/2001 (engine code m62b35)
- 740i 8cyl 286hp from 07/1993 to 03/1996 (engine code m60b40)
- 740iL 8cyl 286hp from 03/1994 to 03/1996 (engine code m60b40)
- 740i 8cyl 286hp from 04/1996 to 07/2001 (engine code m62b44)
- 740iL 8cyl 286hp from 04/1996 to 07/2001 (engine code m62b44)
- 725Tds 6 cyl 143hp from 07/1995 to 02/2000 (engine code m51d25)

Hydraulic clutch transmitter for Mercedes W111

Assignments:
- 230 S (111.010) from 07/1965 to 01/1968
- 250 SE Coupé (111.021) from 09/1965 to 12/1967
 

Hydraulic clutch control hose for Volkswagen Golf 4
For VW Golf 4 and Bora all models with cable-controlled 6-speed manual gearbox
Genuine Volkswagen part

T-fitting on LUK clutch receiver for Audi A3 2
For Audi A3 II (8P) :- 2.0 TDI 136hp (AZV, CBAA, CFFA)- 2.0 TDI 140hp (BKD, BMM, CBAB, CFFB, CJAA, CLJA)- 2.0 TDI 163hp (BUY)- 2.0 TDI 170hp (BMN, CBBB, CFGB)
Original LUK quality

Hydraulic clutch emitter for Porsche 944 and 968 :
-> Porsche 944:- 944 2.5 Turbo 250 hp from 1990 to 1991 from LN chassis- 944 3.0 S2 - 211 hp from 1990 to 1991 from chassis LN
-> Porsche 968:- 968 3.0 from 1992 to 1995- 968 3.0 Club Sport from 1993 to 1995
Diameter: 19.05 mm

This SASIC clutch receiver for Peugeot 504 (02/1971-07/1986)-M10 is true to original.
This SASIC clutch receiver for Peugeot 504 has an M10 connection , and is compatible with most models, sedans, estate cars, coupes and convertibles from serial number 3650193 onwards , whose mounting center distance has been changed to 48mm.
It also equipped the 404 from 1966 to 1971, the 505 and the 604 Diesel.

Clutch Transmitter Cylinder for BMW 3 series E21:

- 315 1.6l 75hp from 11/1980 to 12/1983 (engine code M10B16)
- 316 1.6l 90hp from 02/1975 to 09/1980 (engine code M10B16)
- 316 1,8l 90hp from 10/1980 to 09/1983 (engine code M10B18)
- 318 98hp from 03/1975 to 07/1980 (engine code M10B18)
- 318i 105hp from 10/1980 to 12/1983 (engine code M10B18i)
- 320 4 cylinders (320-4) 109hp from 02/1975 to 10/1982 (engine code M10B20)
- 320i 4 cylinder 125hp from 03/1975 to 08/1978 (engine code M10B20i)
- 320-6 122hp from 08/1977 to 12/1982 (engine code M20B20)
- 323i 143hp from 07/1977 to 10/1982 (engine code M20B23)

This clutch transmitter is also suitable for BMW 5 Series E12 from 06/1975.

Clutchtransmitter for Mini:
- Compatible with all Mini R50 R52 and R53 versions from 09/2000 to 07/2008 with the following engine codes: w10 w17 and w11.

Suitable for VOLKSWAGEN Transporter T25 Petrol from 1979 to 1985 up to chassis No. ->24-F-079999 and diesel / turbo-diesel from 1979 to 1992

Up to chassis -> 24-F-079 999
Allows blocking of hose KC33010

For Golf 4 with left-hand drive.
Up to chassis :
->1J-XB059 000
->1J-XD135 000
->1J-XP124 000
->1J-XW222 000
Engines :
- 1.4 75cv (AHW, APE, AKQ)
- 1.6 100cv (AEH, AKL, APF)
- 1.9 SDi 68cv (AGP, AQM)