Clutch transmitter and receiver

Hydraulic clutch emitter for Porsche 944 and 968 :
-> Porsche 944:- 944 2.5 Turbo 250 hp from 1990 to 1991 from LN chassis- 944 3.0 S2 - 211 hp from 1990 to 1991 from chassis LN
-> Porsche 968:- 968 3.0 from 1992 to 1995- 968 3.0 Club Sport from 1993 to 1995
Diameter: 19.05 mm

This SASIC clutch receiver for Peugeot 504 (02/1971-07/1986)-M10 is true to original.
This SASIC clutch receiver for Peugeot 504 has an M10 connection , and is compatible with most models, sedans, estate cars, coupes and convertibles from serial number 3650193 onwards , whose mounting center distance has been changed to 48mm.
It also equipped the 404 from 1966 to 1971, the 505 and the 604 Diesel.

Hydraulic clutch slave cylinder at the gearbox.

Compatible with Seat Ibiza type 6K:
- 1.8 Turbo 156hp (AQX, AYP)
- 1.9 TDi 90hp (AGR, ALH)
- 1.9 TDi 110hp (ASV)

Hydraulic clutch slave cylinder on the gearbox.

Compatible with Seat Leon type 1M if cable-controlled gearbox.

Hydraulic clutch slave cylinder on the gearbox.

Compatible with Skoda Octavia type 1U if cable-controlled gearbox.

Hydraulic clutch slave cylinder on the gearbox.

Compatible with Seat Ibiza type 6K if the gearbox is controlled by linkage:
- 1.6 100hp (AKL, APF, AUR)
- 1.9 SDi 68hp (AGP, AQM)

Hydraulic clutch slave cylinder on the gearbox.

Compatible with Skoda Octavia type 1U if the gearbox is controlled by linkage

Hydraulic clutch slave cylinder on the gearbox.

Compatible with Seat Leon type 1M if the gearbox is controlled by linkage

Buffer stop for fluid clutch control

For Transporter T4, 01/1996 ->06/2003
Chassis no. 70-T-200 001 ->70-3-200 000.
- 2.5 TDi 5 cylinders 88hp (AYY)
- 2.5 TDi 5 cylinders 102hp (ACV, AUF, AYC, AXL)
- 2.5 TDi 5 cylinders 151hp (AHY, AXG)
- 2.8 Petrol 6 cylinders 140hp (AES)

Mechanical clutch fork control for Volkswagen Transporter T4
For VW T4 all models with mechanical clutch control (not hydraulic)
This control lever pushes the clutch fork, acting as a mechanical clutch receiver .
Original Volkswagen part

Clutch hose for Mercedes Pagode

For Mercedes SL W113 Pagode:
- 250 SL (113.043) from 12/1966 to 01/1968
- 280 SL (113.044) from 01/1968 to 03/1971

This clutch hose is located on the hydraulic control circuit between the clutch sender and receiver. A damaged or porous clutch hose will make it difficult to operate the clutch pedal and may cause hydraulic fluid leaks.

JP GROUP hydraulic clutch emitter for Volkswagen Golf 5
For VW Golf 5 : - All 5- and 6-speed gearbox models

This LPR clutch sender for Alpine A310, Renault 20, Renault 25 and Renault 30 is a quality remanufacture.
This clutch sender for Alpine A310 is compatible with all 6-cylinder models. It was also fitted to top-of-the-range Renault sedans up to the early 90s.
Compatible models :
- Alpine A310 2.7L V6 from 01/1976 to 12/1984, 2664 cc, 150hp
- Renault 20 LS (R1277) from 07/1979 to 12/1983- Renault 20 TS (R1272) from 07/1977 to 06/1979- Renault 20 TS (R1277) from 07/1979 to 12/1983- Renault 20 TX (R1279) from 07/1979 to 12/1983
- Renault 30 TS (R1273) from 03/1975 to 12/1976- Renault 30 TS (R1275) from 01/1977 to 07/1981- Renault 30 TX (R1278) from 10/1978 to 12/1983- Renault 30 Turbo D (R1270) from 07/1981 to 12/1983
- Renault 25 GTX from 03/1984 to 06/1989- Renault 25 V6 Turbo from 07/1985 to 06/1990- Renault 25 V6 Turbo from 07/1990 to 12/1992- Renault 25 V6 2.7 from 03/1984 to 06/1988- Renault 25 V6 2.8 from 07/1988 to 12/1992

Stark clutch master cylinder for Mercedes
For Mercedes W111 Coupé: - 280 SE C (111.024) from 11/1967 to 05/1971
The clutch master cylinder is located at the pedal and actuates the hydraulic clutch control. A faulty sender can cause fluid leakage and gear shifting difficulties.

Rear hydraulic clutch hose for VW Transporter T25 from 05/1979 to 07/1983 :- 1.6 Diesel 50hp (CS)- 1.6 turbo Diesel 70hp (JX)- 1.7 Diesel 57hp (KY)

For Golf 4 with left-hand drive.
Up to chassis :
->1J-XB059 000
->1J-XD135 000
->1J-XP124 000
->1J-XW222 000
Engines :
- 1.4 75cv (AHW, APE, AKQ)
- 1.6 100cv (AEH, AKL, APF)
- 1.9 SDi 68cv (AGP, AQM)

For E36:
- All models excluding M3

For Roadster up to 01/99:
- 1.8 M43
- 1.9 M44
- 2.8 M52

For Coupé up to 01/99
- 2.8 M52

Palier de fixation sur la plaque-support du véhicule pour véhicule à commande d'embrayage hydraulique pour VOLKSWAGEN Transporter T4 de 1996 à 2000 jusque châssis n°70-Y-000941

This LPR clutch receiver for Peugeot 504 (02/1971-07/1986)-M10 is an excellent quality reproduction.
This LPR clutch receiver for Peugeot 504 has an M10 connection and is compatible with most models, sedans, estate cars, coupes or convertibles from serial number 1974191 to 3650192.
It has also equipped the 505, 604 and even the 4x4 P4 and UMM.