Bridge and differential

Transfer case motor for Bmw X5:
Bmw X5 E53 :
- 3.0i 6cyl 231hp phase 2 from 10/2003 to 09/2006 (engine code M54B30) - 4.8is V8 360hp phase 2 from 11/2003 to 09/2006 (engine code N62B48) - 3.0d 6cyl 218hp phase 2 from 10/2003 to 09/2006 (engine code M57D30TU)
Warning! Not suitable for Bmw X5 E53 Phase 1 up to 09/2003.

Hexagonal differential screw for Porsche 911 type F, G and 912 from 1965 to 1983 :

- Porsche 911 type F :

- 911 2.0 from 1965 to 1967
- 911 2.0 S from 1967
- 911 2.0 T / L / S from 1968
- 911 2.0 T / E / S from 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973

- Porsche 911 type G :

- 911 2.7 from 1974 to 1977
- 911 S 2.7 from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 SC 3.0 from 1978 to 1983

- 911 Turbo 3.0 from 1975 to 1977
- 911 Turbo 3.3 from 1978 to 1983

- Porsche 912 :

- 912 1.6 from 1966 to 1969- 912 2.0 from 1976

The screw is sold individually and 12 quantities are required per vehicle.

Axle outlet gasket for MX-5 NA

Can be mounted on the right or left-hand side

- NA 1.6L 90hp and 1.8L
- Not suitable for NA 1.6L 115hp

Sold individually
Genuine Mazda part

Differential outlet gasket for MX-5 NB and NBFL

Can be mounted on the right or left-hand side
For NB and NBFL all models including with Torsen axle

Sold individually
Genuine Mazda part

Differential output bearing for Mazda MX-5 NA

For NA 1.6L 90hp and 1.8L all models
Does not fit NA 1,6L 115hp

Tapered bearing assembly and cage for the deck outlet(see diagram)
Right or left side

Sold by the unit
Original Mazda part

Differential output bearing for Mazda MX-5 NB and NBFL

For NB and NBFL all models including Torsen axle

Tapered bearing assembly and cage for the axle output(see diagram)
Right or left side

Sold individually
Original Mazda part

Cardan joint on rear axle for Bmw 1 Series:
Bmw 1 Series F20 :
- 114i 4cyl 102hp from 11/2011 to 02/2015 (engine code n13b16a)- 116i 4cyl 136hp from 07/2010 to 02/2015 (engine code n13b16a)- 118i 4cyl 170hp from 07/2010 to 02/2015 (engine code n13b16a)- 116i 3cyl 109hp from 07/2014 to 06/2019 (engine code b38b15a)- 118i 4cyl 170hp from 08/2014 to 07/2015 (engine code n13b16a)- 118i 3cyl 136hp from 05/2014 to 06/2019 (engine code b38b15a)- 120i 4cyl 177hp from 06/2014 to 06/2016 (engine code n13b16a)- 120i 4cyl 184hp from 01/2016 to 12/2019 (engine code b48b20a)- m140ix 6cyl 340hp from 09/2015 to 06/2019 (engine code b58b30a)- 114d 4cyl 95hp from 07/2012 to 02/2015 (engine code n47n)- 116de 4cyl 116hp from 09/2011 to 02/2015 (engine code n47n)- 114d 4cyl 95hp from 07/2014 to 05/2015 (engine code n47n)- 114d 3cyl 95hp from 07/2014 to 06/2016 (engine code b37d15a)- 116d 3cyl 116hp from 05/2014 to 06/2019 (engine code b37d15a)- 116de 3cyl 116hp from 07/2014 to 06/2017 (engine code b37d15a)- 118xd 4cyl 150hp from 06/2014 to 05/2019 (engine code b47d20a)
Bmw 1 Series F21 :
- 114i 4cyl 102hp from 12/2011 until 02/2015 (engine code n13b16a)- 116i 4cyl 136hp from 12/2011 to 02/2015 (engine code n13b16a)- 118i 4cyl 170hp from 07/2012 to 02/2015 (engine code n13b16a)- 116i 3cyl 109hp from 07/2014 to 06/2019 (engine code b38b15a)- 118i 3cyl 136hp from 05/2014 to 06/2019 (engine code b38b15a)- 118i 4cyl 170hp from 10/2014 to 06/2015 (engine code n13b16a)- 120i 4cyl 177hp from 06/2014 to 06/2016 (engine code n13b20a)- 120i 4cyl 184hp from 10/2015 to 06/2019 (engine code b48b20a)- 114d 4cyl 95hp from 07/2012 to 02/2015 (engine code n47n)- 116de 4cyl 116hp from 12/2011 to 02/2015 (engine code n47n)- 116d 4cyl 116hp from 01/2012 to 02/2015 (engine code n47n)- 114d 4cyl 95hp from 07/2012 to 02/2015 (engine code n47n)- 114d 3cyl 95hp from 06/2015 to 05/2019 (engine code b37d15a)- 116d 3cyl 116hp from 08/2014 to 05/2019 (engine code b37d15a)- 116de 3cyl 116cv from 07/2014 to 06/2017 (engine code b37d15a)
Quantity required per vehicle: 2
This transmission outputshaft seal is sold individually.

Topran rear axle universal joint for Bmw 3 Series:
Bmw 3 Series F30 Sedan :
- 316d 4cyl 116hp from 05/2011 to 02/2015 (engine code n47n)- 316d 4cyl 116hp from 05/2014 to 02/2015 (engine code b47)- 316i 4cyl 136hp from 03/2012 to 0/2015 (engine code n13)- 320i 4cyl 184hp from 04/2011 to 07/2015 (engine code n20)- 320i ed 4cyl 170hp from 04/2012 to 11/2013 (engine code n13)- 320ix 4cyl 184hp from 05/2011 to 06/2015 (engine code n20)- 328ix 4cyl 245hp from 02/2011 to 06/2015 (engine code n20)- 316i 4cyl 136hp from 01/2015 to 08/2016 (engine code n13)- 318i 3cyl 136hp from 03/2015 until 10/2018 (engine code b38)- 320i 4cyl 184hp from 09/2014 to 10/2018 (engine code b48)- 320i 4cyl 184hp from 01/2015 to 10/2018 (engine code n20)- 320ix 4cyl 184hp from 09/2014 to 10/2018 (engine code b48)- 330ix 4cyl 252hp from 10/2014 to 10/2018 (engine code b48)
Bmw 3 Series F31 Touring :
- 316d 4cyl 116hp from 02/2012 to 02/2015 (engine code n47n)- 316i 4cyl 136hp from 08/2011 to 05/2015 (engine code n13)- 320i 4cyl 184hp from 07/2011 to 06/2015 (engine code n20)- 320ix 4cyl 184hp from 01/2012 to 06/2015 (engine code n20)- 328ix 4cyl 245hp from 02/2012 to 06/2015 (engine code n20)- 318i 3cyl 136hp from 01/2015 to 06/2019 (engine code b38)- 320i 4cyl 184hp from 10/2014 to 06/2019 (engine code b48)- 320ix 4cyl 184hp from 09/2014 to 06/2019 (engine code b47)- 330ix 4cyl 252hp from 10/2014 to 06/2019 (engine code b48)

FEBI BILSTEIN HALDEX differential filter for Audi A3 (8L) and Audi TT (8N) Quattro
Draining and replacement of the HALDEX differential filter on Quattro models is recommended every 60,000 kms.
Original FEBI BILSTEIN quality

The draining and replacement of the HALDEX differential filter, which is fitted in 4-motion models, are recommended every 60,000km (37,000 miles)

Pair of differential bracket bushings for Mazda MX-5 NA, NB and NBFL

For all MX-5 all models including Torsen axle

Sold in pairs

Quality adaptable part

nose cone seal for Bmw 7 Series E38:

Bmw 7 Series E38 :

- 728i 6cyl 193hp from 10/1995 to 09/1998 (engine code m52b28)
- 728iL 6cyl 193hp from 10/1995 to 09/1998 (engine code m52b28)
- 728i 6cyl 193hp from 09/1998 to 07/2001 (engine code m52b28tu)
- 728iL 6cyl 193hp from 09/1998 to 07/2001 (engine code m52b28tu)
- 730i 8cyl 218hp from 07/1993 to 03/1996 (engine code m60b30)
- 730iL 8cyl 218hp from 05/1994 to 03/1996 (engine code m60b30)
- 735i 8cyl 236hp from 12/1994 to 07/2001 (engine code m62b35)
- 735iL 8cyl 236hp from 05/1995 to 07/2001 (engine code m62b35)

Spinnaker gasket on driveshaft flange.

Differential Input Bearing for Mazda MX-5 NA

For NA all models including with Torsen axle

Tapered bearing assembly and its cage for the'axle input(see diagram)
Requires one part

Original Mazda part

Differential input bearing for Mazda MX-5 NB and NBFL

For NB and NBFL all models including with Torsen axle

Tapered bearing assembly and its cage for the axle input(see diagram)
Requires only one part

Original Mazda part

Differential intake gasket for Mazda MX5 NA, NB and NBFL

- NA 1.6L 90hp only
- NA 1.8L all models
- NB and NBFL all models including Torsen

Rear axle gasket on the drive shaft.
1 required

Original MAZDA part

Differential outlet oil seal for Mazda MX-5 NA

For NA 1.6L 115hp all models
Not suitable for NA 1.6L 90hp or 1.8L

Fits on the right and left rear axle outlets

Sold individually
Original MAZDA part

Differential output bearing for Mazda MX-5 NA

For NA 1.6 115hp all models

Tapered bearing assembly and cage for the deck outlet(see diagram)
Right or left side

Sold by the unit
Original Mazda part

Driveshaft seal for Bmw 3 Series:
Bmw 3 Series E30 Sedan :
- 316 1.8L 90hp phase 1 from 03/1983 to 08/1987 (engine code M10B18)- 316i 1.8L 90hp phase 2 from 09/1987 to 07/1988 (engine code M10B18)- 316i 102hp phase 2 from 07/1987 to 12/1990 (engine code M40B16)- 318i 105hp phase 1 from 02/1983 to 08/1987 (engine code M10B18i)- 318i 115hp phase 2 from 09/1987 to 04/1991 (engine code M40B18i)- 320i 6cyl 125hp phase 1 from 01/1983 to 08/1985 (engine code M20B20)- 320i 6cyl 129hp phase 1 from 09/1985 to 08/1987 (engine code M20B20)- 320i 6cyl 129hp phase 2 from 09/1987 to 02/1991 (engine code M20B20)- 324d 6cyl 86hp phase 1 from 04/1985 to 08/1987 (engine code M21D24)- 324d 6cyl 86hp phase 2 from 09/1987 to 12/1990 (engine code M21D24)
Bmw 3 Series E30 Touring :
- 316i 102hp from 06/1991 to 02/1994 (engine code M40B16)- 318i 115hp from 02/1989 to 02/1994 (engine code M40B18)- 320i 6cyl 129hp from 01/1988 to 04/1991 (engine code M20B20)
Bmw 3 Series E30 Coupé :
- 316 1.8L 90hp phase 1 from 03/1982 to 08/1987 (engine code M10B18)- 316i 1.8L 90hp phase 2 from 09/1987 to 07/1988 (engine code M10B18)- 316i 102hp phase 2 from 09/1987 to 04/1991 (engine code M40B16)- 318i 105hp phase 1 from 03/1982 to 08/1987 (engine code M10B18i)- 318i 115hp phase 2 from 09/1987 to 04/1991 (engine code M40B18i)- 318is 136hp phase 2 from 02/1989 to 05/1991 (engine code M42B18)- 320i 6cyl 125hp phase 1 from 01/1982 to 08/1985 (engine code M20B20)- 320i 6cyl 129hp phase 1 from 09/1985 to 08/1987 (engine code M20B20)- 320i 6cyl 129hp phase 2 from 09/1987 to 04/1991 (engine code M20B20)
Bmw 3 Series E30 Cabriolet :
- 320i 6cyl 129hp from 04/1986 to 09/1990 (engine code M20B20)- 318i 115hp from 07/1990 to 04/1993 (engine code M40B18)- 320i 6cyl 129hp from 10/1990 to 01/1993 (engine code M20B20)
Worth knowing:
Axle flange spi gasket which receives the driveshaft.

For Saloon:
- 323i M52
- 325i M50
- 325td/tds M51
- 328i M52
- M3 S50

For Touring:
- 323i M52
- 325tds M51
- 328i M52

For Coupé & Cabriolet:
- 323i M52
- 325i M50
- 328i M52
- M3 S50

For Compact:
- 323ti M52

Driveshaft seal for BMW X3 E83 and LCI:

- Compatible with all BMW X3 E83 and LCI models from 01/2003 to 08/2010 except 3.0sd models engine code M57D30TU2TOP Xdrive 35d.

Spigot and socket joint on driveshaft flange.