Hood

Only suitable for Coupé & Cabriolet (except M3) from 03/03->

Quality part, said to be "adaptable" because it does not come from the manufacturer.
Our sheet metal parts are delivered primed for storag

Quality part, called 'adaptable' because it is not supplied by the vehicle manufacturer
Our sheet metal components are delivered with a storage primer: this paint needs to be sanded and primed again before painting

For E90 & E91 up to ->09/08:
- All models except M3

Located at the extremity of the bonnet, embellishing,

For E90 & E91:
- All models

Suitable for all A4 (B5) Saloon and Avant models (including S4)
(Not suitable for RS4)

Quality part, said to be "adaptable" because it does not come from the manufacturer.
Our sheet metal parts are delivered primed for storag

High-quality remanufactured front hood for BMW 02 series E10 Sedan, Touring, Cabriolet and Cabriolet Baur Targa phase 1 and phase 2 from 03/1966 to 12/1975:

- All models from 1600-2 to 2002Turbo

ATTENTION: Not suitable for 1502 produced from 11/1974 to 07/1977!

Emblem, hinges and chrome mouldings not included.

INFORMATION: It is drilled around the perimeter to accept the aluminum trim strips (chrome moldings).

The front hood is delivered bare with black storage paint. Before final painting of this part, it is essential to treat and prepare it to prevent corrosion from reappearing.

Treat your E10 to a high-quality body part!

This metal front body panel is called "adaptable" because it doesn't come from the manufacturer.

Due to its size, fragility and composition, this product cannot be delivered to your home or to a relay point. However, it is still possible to collect it directly from the store or to send it to us by courier.

For E90, E91 & E93:
- All models (including M3)

For E90 LCI, E91 LCI & E93 LCI:
- All models (including M3)

Fitted to the inner side of the bonnet, reduces engine noise,

For E60:
- All models except M5

For E61:
- All models

For E60 LCI:
- All models

For E61 LCI:
- All models, including M5

Front hood for BMW 1 Series E81 Sedan 3-door, E87, E87LCI Sedan 5-door, E82 Coupé and E88 Convertible:
E81 3-door sedan :- 116i 115hp from 04/2007 to 12/2011 (engine code N45B16)- 116i 122hp from 03/2007 to 11/2011 (engine code N43B16)- 116i 2.0L 122hp from 11/2008 to 11/2011 (engine code N43B20)- 118i 2.0L 129hp from 09/2006 to 12/2011 (engine code N46B20)- 118i 2.0L 143hp from 02/2006 to 12/2011 (engine code N43B20)- 120i 150hp from 09/2006 to 10/2011 (engine code N46B20)- 120i 170hp from 09/2006 to 12/2011 (engine code N43B20)- 130i 6cyl 258hp from 02/2006 to 12/2011 (engine code N52B30)- 116d 2.0L 116hp from 11/2008 to 12/2011 (engine code N47D20)- 118d 2.0L 143hp from 09/2006 to 12/2011 (engine code N47D20)- 120d 177hp from 02/2006 to 12/2011 (engine code N47D20)- 123d 2.0L 204hp from 03/2007 to 12/2011 (engine code N47D20)
E87 5-door sedan :- 116i 115hp from 03/2003 to 02/2007 (engine code N45B16)- 118i 2.0L 129hp from 07/2004 to 02/2007 (engine code N46B20)- 120i 150hp from 03/2003 to 02/2007 (engine code N46B20)- 130i 6cyl 265hp from 03/2005 to 02/2007 (engine code N52B30)- 118d 2.0L 122hp from 02/2003 to 02/2007 (engine code M47D20TU2)- 120d 163hp from 03/2003 to 02/2007 (engine code M47D20TU2)
E87LCI 5-door sedan :- 116i 115hp from 02/2006 to 06/2011 (engine code N45B16)- 116i 122hp from 03/2007 to 06/2011 (engine code N43B16)- 116i 2.0L 122hp from 10/2008 to 06/2011 (engine code N43B20)- 118i 2.0L 129hp from 10/2006 to 06/2011 (engine code N46B20)- 118i 2.0L 143hp from 02/2006 to 06/2011 (engine code N43B20)- 120i 150hp from 09/2006 to 06/2011 (engine code N46B20)- 120i 170hp from 02/2006 to 06/2011 (engine code N43B20)- 130i 6cyl 258hp from 01/2006 to 06/2011 (engine code N52B30)- 116d 2.0L 116hp from 10/2008 to 06/2011 (engine code N47D20)- 118d 2.0L 143hp from 01/2006 to 06/2011 (engine code N47D20)- 120d 177hp from 02/2006 to 06/2011 (engine code N47D20)- 123d 2.0L 204hp from 03/2007 to 06/2011 (engine code N47D20)
E82 Coupé :- 120i 150hp from 06/2009 to 06/2012 (engine code N46B20)- 120i 170hp from 06/2009 to 06/2012 (engine code N43B20)- 125i 6cyl 3.0L 218hp from 02/2007 to 06/2012 (engine code N52B30)- 135i 6cyl 3.0L 306hp from 11/2006 to 06/2012 (engine code N54B30)- 1 M Coupé 6 cyl 3.0L 340hp from 11/2006 to 06/2012 (engine code N54B30)- 118d 2.0L 143hp from 06/2009 to 06/2012 (engine code N47D20)- 120d 177hp from 06/2009 to 06/2012 (engine code N47D20)- 123d 2.0L 204hp from 11/2006 to 06/2012 (engine code N47D20)
E88 Cabriolet :- 118i 2.0L 129hp from 03/2008 to 06/2012 (engine code N46B20)- 118i 2.0L 143hp from 09/2007 to 06/2012 (engine code N43B20)- 120i 150hp from 11/2006 to 06/2012 (engine code N46B20)- 120i 170hp from 11/2006 to 06/2012 (engine code N43B20)- 125i 6cyl 3.0L 218hp from 05/2007 to 06/2012 (engine code N52B30)- 135i 6cyl 3.0L 306hp from 11/2006 to 06/2012 (engine code N54B30)- 118d 2.0L 143hp from 03/2008 to 06/2012 (engine code N47D20)- 120d 177hp from 09/2007 to 06/2012 (engine code N47D20)- 123d 2.0L 204hp from 03/2008 to 06/2012 (engine code N47D20)
Delivered without logo.
Our sheet metal parts are delivered in storage primer: this paint has to be sanded and primed again before painting.
This is an "adaptable" quality part, as it does not come from the manufacturer.

Rear trunk lidof high-end remanufacturing for BMW 02 series E10 Sedan, Cabriolet and Cabriolet Baur Targa phase 1 and phase 2 from 03/1966 to 07/1977 :

- All models from 1502 to 2002Turbo (except Touring)

Emblem, lock, hinges, chrome moldings and gasket not included.

INFORMATION: It is drilled around its perimeter to receive the aluminum body tower moldings (chrome moldings). For phase 2 from 09/1973, it will be necessary to drill the 2 holes at the rear of the trunk for the installation of the domed BMW emblem (reference BK20014).

The trunk panel is delivered bare in black storage paint. Before final painting, it is essential to treat and prepare it in order to prevent corrosion from reappearing.

Give your E10 a high quality body part!"

This metal rear body panel is said to be "adaptable" as it is not from the manufacturer.

Engine hood for Volkswagen Golf 1 Sedan, Cabriolet and Caddy :
- All petrol and diesel models from 02/1974 to 07/1993
The front hood is delivered bare with black storage paint. Before final painting of this part, it is essential to treat and prepare it to prevent corrosion from reappearing.
This metal front body panel is said to be "adaptable", as it does not come from the manufacturer.

Length: 418mm

LH or RH mounting bracket for the bonnet hinge.

Enables the articulation of the hinges and thus the bonnet.

Sold individually, suitable for Volkswagen Golf 2 and Jetta 2

Hood silencer for Bmw 1 Series:
- Compatible with all Bmw 1 Series F20 and F21 versions from 07/2010 to 06/2019.
Clips included.

Hood sound deadenerfor Volkswagen Golf 6
For VW Golf 6 sedan, station wagon and convertible models
Engine hood insulator with heat shield plate

Suitable for all E28 models including M5

Rubber bumper for the engine cover on Mazda MX5 NA

- Genuine Mazda part
- Two required for a vehicle

Front hood sound insulator for Volkswagen Golf 7
For VW Golf 7 all sedan and estate models, including GTI and Golf R
Felt hood insulator with heat-shielding coating, complete with fasteners

DANSK steel front hood for Porsche 911 and 912 up to 1973:
-> Porsche 912:- 912 1.6 from 1966 to 1969
-> Porsche 911:- 911 2.0 from 1965 to 1967- 911 2.0 T / L / E / S from 1967 to 1969- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973- 911 2.7 Carrera RS from 1973

Front hood in fibreglass-reinforced polyester resin for Porsche 911 type F from 1965 to 1973 :
- 911 2.0 from 1965 to 1967- 911 2.0 T / L / E / S from 1967 to 1969- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973- 911 2.7 Carrera RS from 1973
This body part is a faithful, high-quality reproduction: made in France by a recognized specialist who has worked for Porsche for decades. Designed in composite, it eliminates any risk of corrosion, offers increased rigidity and a significant weight saving compared with the original component: around 7 kg compared with almost 14.6 kg for the steel version, and without the risk of deformation of the aluminum version!
Ideal for restomods, track preparation or restoration, this part benefits from a precise fit, thanks to castings made with the utmost care from an original component.

Kevlar carbon front hood for Porsche 911 F type from 1965 to 1973 :
- 911 2.0 from 1965 to 1967- 911 2.0 T / L / E / S from 1967 to 1969- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973- 911 2.7 Carrera RS from 1973
This body part is a faithful, high-quality reproduction, made in France by a recognized specialist who has worked for Porsche for decades. Designed in composite, it eliminates any risk of corrosion, offers increased rigidity and a significant weight saving compared with the original component: around 5 kg compared with almost 14.6 kg for the steel version!
Ideal for restomods, track preparation or restoration, this part benefits from a precise fit, thanks to carefully crafted molds.