Front & rear panel

Trim for lower part of short front panel, for version in 1 part with radiator grille and square indicators phase 2 (AC0). Model without headlamp washer hole.

For Transporter T4, 09/1994 ->04/2003
since chassis no. 70-S-010 966->

Right-hand rear underskirt support for VW Combi Split Brazil (1957-1975)

Steel front apron to weld onto the short bonnet tip
Versionwith slots for bumper attachments.

For Beetle 1200 from 08/1967 -> 07/1973
Chassis no. 118 000 001 -> 113 3200 000.

Steel front apron to weld onto the tip of the short bonnet
Version without slot for attachment.

For Beetle:
- 1200 from 08/1973-> chassis no. 114 2000 001->
- 1300, 1500 from 08/1967-> chassis no. 118 000 001->
- Cabriolet 08/1967 ->07/1970 no. 158 000 001 ->150 3100 000.

Front axle hatch in trunk.
Need 2, sold individually.

For VW Beetle (-07/1959)

Spare wheel well for Beetle 1302, 1303

Rear panel for Mini Austin:
- Compatible with all Mini Austin versions from 09/1958 to 11/2000.
This body panel is delivered in storage paint. It will need to be treated and prepared to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly to check alignment and adjustment on the body.

High-quality complete front interior reinforcement frame.
This high-quality repair element is faithful to the original buses.
All reinforcement elements have been welded as original.

For VW Combi Split LHD buses from 03/1955 to 12/1963.

Rear lower panel (short version) for VW Golf 1 from 1981
For Golf 1 Sedan 81 ->84 (phase 2 model with large lights)
Rear apron

Interior rear crossmember for Mercedes SL

For Mercedes SL W113 Pagoda all models :
- 230 SL (113.042) from 07/1963 to 01/1967
- 250 SL (113.043) from 12/1966 to 01/1968
- 280 SL (113.044) from 01/1968 to 03/1971

This rear panel replaces the inner part of the rear crossmember.

Rear apron inner panel for Mercedes Pagoda

For Mercedes SL W113 Pagoda all models :
- 230 SL (113.042) from 07/1963 to 01/1967
- 250 SL (113.043) from 12/1966 to 01/1968
- 280 SL (113.044) from 01/1968 to 03/1971

This repair plate is used to replace the inner part of the lower rear apron.

Front panel for Volkswagen Golf 5 Sedan 3 and 5 doors :

- 1.4L TSI 122hp from 05/2007 to 11/2008 (engine code CAXA)
- 1.4L TSI 140hp from 02/2006 to 11/2008 (engine code BMY)
- 1.9L TDI 105hp from 10/2003 to 11/2008 (engine code BXE)
- 1.9L TDI 4Motion 105hp from 08/2004 to 11/2008 (BXE engine code)
- 1.9L TDI 105hp from 10/2003 to 11/2008 (BKC engine code)
- 1.9L TDI 4Motion 105hp from 08/2004 to 11/2008 (BKC engine code)
- 1.9L TDI 105hp from 06/2005 to 10/2008 (BLS engine code)
- 1.9L TDI 4Motion 105hp from 06/2005 to 10/2008 (BLS engine code)
- 2.0L TDI 140hp from 10/2003 to 10/2008 (BKD engine code)
- 2.0L TDI 4Motion 140hp from 10/2003 to 10/2008 (BKD engine code)
- 2.0L TDI 140hp from 12/2004 to 10/2008 (engine code BMM)
- 2.0L TDI 4Motion 140hp from 12/2004 to 10/2008 (engine code BMM)

ATTENTION: Not suitable for GT and GT-SPORT trim levels, nor for Volkswagen Golf 5 Plus!

This part is "adaptable" because it does not come from the manufacturer.

Front panel for Volkswagen Golf 5 GTI, R32 and GT, GT-SPORT trim levels:

- GTI 2.0 TFSI 200hp from 09/2004 to 06/2008 (engine code AXX)
- GTI 2.0 TFSI 200hp from 09/2004 to 06/2008 (engine code BPY)
- GTI 2.0 TFSI 200hp from 09/2004 to 06/2008 (engine code BWA)
- GTI 2.0 TFSI 200hp from 09/2004 to 06/2008 (engine code CAWB)
- GTI 2.0 TFSI 200hp from 09/2004 to 06/2008 (engine code CBFA)
- GTI 2.0 TFSI 200hp from 09/2004 to 06/2008 (engine code CCTA)
- GTI 2.0 TFSI 230hp from 11/2006 to 06/2008 (BYD engine code)
- R32 3.2L FSI V6 4Motion 250hp from 08/2005 to 06/2008 (BDB engine code)
- R32 3.2L FSI V6 4Motion 250hp from 08/2005 to 06/2008 (engine code BMJ)
- R32 3.2L FSI V6 4Motion 250hp from 08/2005 to 06/2008 (engine code BUB)
- R32 3.2L FSI V6 4Motion 250hp from 08/2005 to 06/2008 (engine code CBRA)
- 1.4L TSI 140hp from 07/2007 to 11/2008 (engine code BMY) --> GT-SPORT finish
- 1.4L TSI 170hp from 11/2005 to 06/2007 (engine code BLG) --> GT finish
- 1.4L TSI 170hp from 07/2007 to 11/2008 (engine code BLG) --> GT-SPORT trim level
- 1.9L TDI 105hp from 07/2007 to 11/2008 (engine code BXE) --> GT-SPORT finish
- 1.9L TDI 4Motion 105hp from 07/2007 to 11/2008 (engine code BXE) --> GT-SPORT finish
- 1.9L TDI 105hp from 07/2007 to 11/2008 (engine code BKC) --> GT-SPORT finish
- 1.9L TDI 4Motion 105hp from 07/2007 to 11/2008 (engine code BKC) --> GT-SPORT finish
- 1.9L TDI 105hp from 07/2007 to 10/2008 (engine code BLS) --> GT-SPORT finish
- 1.9L TDI 4Motion 105hp from 07/2007 to 10/2008 (engine code BLS) --> GT-SPORT finish
- 2.0L TDI 140hp from 07/2007 to 10/2008 (BKD engine code) --> GT-SPORT finish
- 2.0L TDI 4Motion 140hp from 07/2007 to 10/2008 (engine code BKD) --> GT-SPORT finish
- 2.0L TDI 140hp from 07/2007 to 10/2008 (engine code BMM) --> GT-SPORT finish
- 2.0L TDI 4Motion 140hp from 07/2007 to 10/2008 (engine code BMM) --> GT-SPORT finish
- 2.0L TDI 170hp from 05/2006 to 06/2007 (engine code BMN) --> GT finish
- 2.0L TDI 170hp from 07/2007 to 11/2008 (engine code BMN) --> GT-SPORT finish

ATTENTION: Not suitable for Volkswagen Golf 5 Plus!

This part is "adaptable" because it does not come from the manufacturer.

For Polo 9N3 from chassis 9N-5-500 001-> for vehicles with air conditioning.

Quality part, referred to as adaptable" as it is not provided by the vehicle manufacturer"

Quality part, referred to as adaptable" as it is not provided by the vehicle manufacturer"

Quality part, referred to as adaptable" as it is not provided by the vehicle manufacturer"

Suitable for all Bora 4 cylinders with 650mm radiator
Except for TDi 130 and TDi 150

For Polo 6N1 from 09/94 ->09/99

Single-fan version (not included)
430 mm-wide coolant radiator