Suspension ball joints

Wishbone ball, joint driver's side
Suitable for:

VW
- Fox 1.2 ->1.4 (E/ D) 04/05 ->11/06
- Polo 5 9N1 1.2 (AWY 54hp) with power-assisted steering 01/02->
- Polo 5 9N1 all other models (E / D) 11/01->
- Polo 5 9N3 1.2 ->1.9 (E / D)with power-assisted steering 04/05->

SEAT
- Ibiza 1.2 ->2.0 (E /D) 09/01->
- Cordoba 1.2 ->2.0 (E / D) 09/01->

SKODA
- Fabia1.2 ->2.0 (E / D) with power-assisted steering 08/99 ->08/07
- Roomster1.2 ->1.9 (E / D) 03/06->

For all E36 versions, except M3

MEYLE HD reinforced right suspension ball joint kit for Skoda Octavia
For Skoda Octavia 1 (1U) all models incl. 4-wheel drive
Right side (passenger)
Complete right-side kit (passenger side) :- Left ball joint M12 x 1.5- 1 Stop- Set of fixing screws
This MEYLE HD suspension ball joint is of superior quality to the original. MEYLE HD parts are made from reinforced materials and optimized design, guaranteeing superior manufacturing quality for a long-lasting replacement.

This clip is essential to ensure that the ball joint on your Citroën ID is properly sealed.

For VOLKSWAGEN Transporter T5 for laden weight of 3.2T

Left or right, sold individually.

Front lower suspension ball joint for Mercedes /8

For Mercedes /8 W114 and W115 all sedan and coupé models

This front wishbone ball joint is located on the lower left or right wishbone on the wheel side.

Sold individually

Round front suspension ball joint for Beetle 1303 all models since 08/1973.Press assembly.

Suitable for VW with wheels with 4 mounting holes:
- Golf 2 and Jetta 2 from 84 ->92
-Golf 3 saloon, estate & cabriolet from 92 ->98
- Vento from 92 ->98
- Golf 4 cabriolet from 99 ->03
- Corrado from 89 ->95
- Polo Classic& estate from 96 ->02
- Polo Caddy (2) from 96 ->03
- Passat 3 from 88 ->97

Suitable for Corrado VR6

Front upper suspension ball joint joint replacement boot for Mazda MX-5 NA

- For NA all models

Suitable for left or right-hand
Sold individually

Genuine Mazda part

Suitable for Golf 3 (between axes 4 x 100 only, except for GTI & VR6)

Set of 4 heavy-duty suspension spherical plain bearings
2 upper 2 lower
Slightly wider models to compensate for suspension arm wear.
For Combi Bay Window all models 08/1967 ->07/1979

Remember to use the KJ51290 eccentric bushes (x2) to adjust the camber of your Combi's front axle, to be repositioned when fitting the new upper ball joints.

Washer for lower suspension ball joint
For suspension ball joint with M10 thread (old version)
Check before ordering
Sold individually, 1 required per side

- For VW Beetle 1200, 1300, 1500 (except 1302/1303) & Karmann-Ghia with ball joint front suspension
Years: since 08/1965-> 11/1965

Suspension ball joint for lower wishbone
Superior reinforced quality to last longer
ideal for heavy or underslung vehicles.

ForTransporter T25/T3, 05/1979 ->07/1992
All models including Syncro version (4 x 4).

Locking pin no. 87 for Mazda MX-5 NA

- For NA all models

Used to lock the lower suspension ball joint joint castle nut

Sold individually
Genuine Mazda part

FEBI upper control arm ball joint left or right for BMW X3 E83 LCI:

Compatible only with LCI models:

- xDrive20i 4cyl 150hp from 07/2008 to 08/2010 (engine code N46B20)
- 2.5si 6cyl 218hp from 03/2006 to 06/2008 (engine code N52B25)
- xDrive25i 6cyl 218hp from 07/2008 to 08/2010 (engine code N52B25)
- 3.0si 6cyl 272hp from 02/2006 to 06/2008 (engine code N52B30)
- xDrive30i 6cyl 272hp from 07/2008 to 08/2010 (engine code N52B30)
- xDrive18d 4cyl 2.0L 143hp from 04/2009 to 08/2010 (engine code N47D20)
- 2.0d 4cyl 150hp from 03/2006 to 08/2007 (engine code M47D20TU)
- 2.0d 4cyl 177hp from 03/2007 to 06/2008 (engine code N47D20)
- xDrive20d 4cyl 177hp from 07/2008 to 08/2010 (engine code N47D20)
- 3.0d 6cyl 218hp from 03/2006 to 06/2008 (engine code M57D30TU)
- xDrive30d 6cyl 218hp from 07/2008 to 08/2010 (engine code M57D30TU)
- 3.0sd 6cyl 286hp from 03/2006 to 06/2008 (engine code M57D30TU2TOP) --> bi-turbo
- xDrive35d 6cyl 3.0L 286hp from 07/2008 to 08/2010 (engine code M57D30TU2TOP) --> twin-turbo 3.0d engine

ATTENTION! there are 2 different assemblies between the phase 1 and phase 2 models.

This product is sold individually.

MEYLE HD front suspension lower link for Mercedes C-Class W202

For Mercedes C-Class W202 and Estate S202 all models
Left or right side

This MEYLE HD lower suspension ball joint is of superior quality to the original. MEYLE HD parts are made from reinforced materials and optimized design, guaranteeing OE-quality workmanship for a long-lasting replacement.

Sold individually

Meyle Originallower suspension ball joint for Renault Clio Williams and Clio 16S
Original quality part.
Sold individually, with screws.
Mounts on left or right side.
Assignments :- 1.8 16 S C575 1764cm3 140hp (F7P720) phase 1 from 1991 to 1993- 1.8 16 S C57/D 1764cm3 137hp catalyzed (F7P722) phase 1 from 1993 to 1994- 1.8 16 V C57/D 1764cm3 137hp catalytic (F7P722) phase 2 from 1994 to 1996- 2.0 Williams C57M 1998cm3 150hp (F7R700) phase 1 from 1993 to 1994- 2.0 Williams C57M 1998cm3 150hp (F7R700) phase 2 from 1994 to 1996

Right or left upper suspension ball joint for Renault 25 from 1984 to 1994.
The ball joint comes with the screws.

Compatible with R25:
- TX and TXE: 2L (J7R) type B29H
- GTX: 2.2L (J7T) type B29B-B29E
- TS and GTS: 2L (J6R) type B297
- TI and TXI: 2L (J7R) type B292 & B294
- Turbo-D and DX: 2.1L (J8S) type B29W & B290
- TD and GTD: 2.1L (J8S) type B296
- V6i: 2.8L (Z7W) type B29F & B293
- V6 Injection: 2.8L (Z7W) type B29A
- V6 Injection: 2.7L (Z7V) type B298
- V6 Turbo: 2.5L (Z7U) type B29G & B295

For Audi 80 and 90 with power steering:
- 2.3 20V 7A (including Quattro)