Joint yoke

Set of driveshaft seals for Peugeot 205 GTi 1.9 L with ABS.

These driveshaft seals for Peugeot 205 GTI with ABS of higher quality than the original are signed MEYLE Original Quality.

These joints are then stronger and have an optimal lifespan compared to other Original driveshaft joints.

Mounts on the wheel side.

Suitable only for the following models:

Peugeot 205 GTI Phase I

- 205 GTI 1.9 L - 102hp from 03/1987 to 10/1987
- 205 GTI 1.9 L - 128hp from 10/1986 to 10/1987

Peugeot 205 GTI Phase II

- 205 GTI 1.9 L - 102hp from 10/1987 to 05/1989
- 205 GTI 1.9 L - 120hp from 10/1987 to 10/1994
- 205 GTI 1.9 L - 128hp from 10/1987 to 09/1998

For Golf 6 Saloon with 6-speed manual gearbox:
- 1.8 TFSi 160hp (CDAA)
- 2.0 TDi 136hp (CBAA, CFFA)
- 2.0 TDi 140hp (CBAB, CFFB) including 4MOTION
- 2.0 GTi 200hp (CCTA)
- 2.0 GTi 210hp (CCZB)

For Golf 6 Variant with 6-speed manual gearbox:
- 2.0 TDi 136hp (CBDA, CFHB)
- 2.0 TDi 140hp (CFHC)

For A3 (8L) up to chassis ->8L-x-001 445
with manualgearbox:
- 1.8 125hp (AGN)
- 1.8 Turbo 150hp (AGU)
- 1.9 TDi 90hp(AGR, ALH)
- 1.9 TDi 110hp (AHF)

For A3 (8L) from chassis8L-x-001 446->
with manual gearbox:
- 1.8 125hp (AGN, APG)
- 1.9TDi 90hp (AGR, ALH)
- 1.9 TDi 100hp (ATD, AXR)
- 1.9 TDi 110hp (AHF,ASV)

for A3 (8L) Quattro:
- 1.8 Turbo 150hp (ARX)
- 1.8 Turbo150hp (AQA, ARZ) up to chassis ->8L-x-098 487 and
with gearbox letter-marking EAJ

Repair kit for Citroën DS driveshaft tripod housing.
This complete kit effectively renovates the driveshaft tripod housing on your Citroën DS, restoring the cardan shaft.
It's ideal for restoring the transmission's smooth running, reducing parasitic noise and ensuring a smooth, serene drive.
A reliable solution for restoring original peace of mind, while extending the life of your driveshaft.

For Golf 5 Sedan with 6-speed manual gearbox :- 2.0 TDi 136hp (AZV)- 2.0 TDi 170hp (BMN)- 2.0 GTi 200hp (BWA, BPY)- 2.0 GTi 230hp (BYD)- R32 3.2FSi V6 4Motion 250hp (BUB)
For Golf 5 Variant with 6-speed manual gearbox :- 2.0 TDi 136hp (AZV) incl. 4MOTION- 2.0 TDi 140hp (BKD, BMM, CBDB)- 2.0 TFSi 200hp (CAWB)

For A4 (B5):
- 1.6 102hp (ALZ)
- 1.8 Turbo 180hp (AJL)
- 2.4 163hp and 165hp (AMM, AJG, AGA, ALF, AML, APS, APZ, ARJ)
- 2.5 TDi 150hp (AFB, AKN)
- 2.6 139hp and 150hp (ACZ, ABC) except automaticgearbox
- 2.8 174hp (AAH)
- 2.8 190hp and 193hp (ATX, ACK, ALG, APR,AQD)

for A6 (C5):
- 1.8 180hp (AJL)
- 1.9 TDi 110hp and 115hp (AVG, AFN, AJM)
- 1.9 TDi 130hp (AVF, AWX)
- 2.0 130hp (ALT) exceptautomatic gearbox
- 2.4 136hp and 156hp (ASM, ALW, APC)
- 2.4 163hp (AJG, AMM, APZ)
- 2.4 165hp and 170hp (AGA, ALF, AML, APS, ARJ, BDV)
- 2.5 TDi 150hp (AFB, AKN)
- 2.5 TDi 180hp (AKE)
- 2.7 Turbo 230hp (AJK)
- 2.8 180hp (AGE, ALG)
- 2.8 190hp and 193hp (ATX, ACK, AMX, APR,AQD)

For Audi Cabriolet from 1992 -> 2000,
with manual gearbox:
- 1.8 125hp (ADR)
- 2.0 140hp (ACE)
- 2.3 133hp (NG)

For Golf 4 (except 4-Motion & Automatic) :
- 1.9 TDi 90cv (AGR, ALH)
- 1.9 TDi 100cv (ATD, AXR)
- 1.9 TDi 110cv (AHF, ASV)
- 2.0 115cv (APK, AQY, AZG, AZJ, BEH)

For New Beetle, mecanic gearbox :
- 1.9 TDi 90, 100 & 105cv (ALH, ATH, BSW)

For Polo 9N1 :
- 1.2 64hp (AZQ, BME)
- 1.4 75hp (AUA, BBY, BKY)
- 1.4 85hp (AXU)
- 1.4 100hp (AUB, BBZ)
- 1.9 SDi 64hp (ASY)

For Polo 9N3 :
- 1.2 64hp (BME)
- 1.2 70hp (BZG)
- 1.4 75hp (BKY)
- 1.4 80hp (BUD)
- 1.4 85hp (AXU)
- 1.4 100hp (BBZ)
- 1.9 SDi 64hp (ASY)

For Golf 5 Variant with DSG gearbox:
- 1.4 TSi 122hp (CAXA)
- 1.4 TSi 160hp (CAVD)

For Golf 2 :
- 1.8 with carburetor 08/89->
- 1.8 GTi 8s, 16s & G60

CEVAM inner cardan joint kit for Audi A6 C5
For Audi A6 C5:- 1.8 116hp (AFY) until 05/2000- 1.8 125hp (AJP, AQE, ARH) from 12/1997 to 04/2001- 1.8 T 150hp (AEB, ANB, APU, ARK, AWT) from 04/1997 to 05/2004- 1.8 T Quattro 150hp (AEB, ANB, APU, ARK, AWT) from 04/1997 to 05/2004 (Front axle only)- 2.7 T 230hp (AJK) until 08/2000- 2.7 T Quattro 230hp (AJK, AZA) from 02/1999 to 05/2001 (Front axle only)- 2.7 T Quattro 250hp (ARE, BES) Front and rear axles- 4.2 Quattro 299hp (ARS, ART, ASG, AWN) from 04/1999 (front and rear axles)- S6 Quattro 340hp (ANK, AQJ) manual gearbox only (front and rear axles)- RS6 Quattro 450hp (BCY) Rear axle only- RS6 Plus Quattro 480hp until 09/2004 (rear axle only)
Gearbox-side internal knuckleLeft or right side, sold individually
Complete kit with gaskets, collar, screws, bellows, grease and spacers

Cardan joint for right or left for Porsche 911 and 930 from 1985 to 1989:

-> Porsche 911 :
- 911 Carrera 3.2 of 1985 with gearbox 915.72 and 915.73
- 911 Carrera 3.2 from 1986 to 1989
- 911 Carrera 3.2 from 1987 to 1989 M491 Turbo Look

-> Porsche 930 :
- 911 3.3 Turbo from 1985 to 1989

Suitable for right and left drive shaft, gearbox side as wheel side.

6 holes M10 assembly

Sold individually.

Cardan joint for right or left for Porsche 944 from 1987 to 1991 :

- 944 2.5 Turbo 220 hp from 1987 to 1988
- 944 2.5 Turbo S / Cup 250 hp from 1988
- 944 2.5 Turbo 250 hp from 1989 to 1991
- 944 3.0 S2 - 211 hp from 1989 to 1991

Suitable for right and left drive shaft, gearbox side as wheel side.

Sold individually.

Complete constant velocity joint kit for 1 universal joint side:
Cup joint + Gaiter + Nuts and bolts + Grease
Fitted inside or outside of the left or right-hand universal joint.
For:
- Beetle 1302, 1303 & Automatic
- Karmann-Ghia
- Type 3
- 181, Buggy, 356 Replica
with Type 1 gearbox with universal joints (diameter: 90 mm).
33 grooves

For Golf 2:
- 1.3
- 1.6 petrol
- 1.6 Diesel & turbo Diesel
- 1.8 with carburettor ->07/89

For Golf 3:
- 1.4
- 1.6

For Golf 6 Saloon with DSG gearbox:
- 1.4 TFSi 122hp (CAXA)
- 1.6 TDi 105hp (CAYC)
- 1.6 TFSi 160hp (CAVD, CNWA)

For Golf 6 Variant with DSG gearbox:
- 1.2 TFSi 105hp (CBZB)
- 1.4 TFSi 122hp (CAXA)
- 1.6 TDi 105hp (CAYC) including 4MOTION
- 1.6 TFSi 160hp (CAVD)
- 2.0 TFSi 200hp (CCZA)

Wheel-side cardan nut kit for front axle, driver or passenger side,

For Golf 6 Sedan with 6-speed manual transmission:
- 1.6 TFSi 160hp (CDAA)
- 2.0 TDi 170hp (CBBB, CFGB)
- 2.0 GTi 200hp (CBFA, CCTA)
- 2.0 GTi 235hp (CDLG)
- 2.0 TFSi 255hp (CDLC)
- 2.0 TFSi 256hp (CRZA)
- 2.0 TFSi 271hp (CDLF)
- 2.0 GTi 210hp (CCZB)

33-tooth cardanshaft diameter 100mminside right gearbox side with MEYLE bellows for Volkswagen Golf 3 :
Golf 3 and Vento :- 1.8 75hp and 90hp (engine codes AAM, ANN, ABS, ACC, ANP, ADZ)- 1.9 D 64hp (engine code 1Y)- 1.9 SDI 64hp (engine code AEY)- 1.9 TD 75hp (engine code AAZ)- 2.0 107hp and 115hp (engine codes AEP, 2E, AGG, AKR, ADY)- 2.0 16S 150hp (engine code ABF)
Supplied with bellows, gasket, screws, nut, washer and circlip.Clamp on short side of bellows on shaft not included.
This homokinetic ball joint is intended for the right-hand passenger side.
ATTENTION: On some models, there are 2 possible mountings with 90mm or 100mm nuts. We recommend you check your mounting before ordering!

Cardan joint for right or left for Porsche 911 and 912 from 1975 to 1985 :

-> Porsche 912 :
- 912 2.0 E from 1976

-> Porsche 911 :
- 911 2.7 from 1975 to 1977
- 911 2.7 S from 1975 to 1977
- 911 Carrera 2.7 from 1975 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 SC 3.0 from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1985 with mechanical gearbox type 915.67 and 915.68

-> For the 911 with engine 2.7 of 1975 this joint is assembled from the following chassis numbers :

- 911 Coupe 2.7 from 1975 and chassis N° F 91151 00728
- 911 Targa 2.7 from 1975 and chassis N° F 91151 10610

- 911 S Coupe 2.7 from 1975 and chassis N° F 91153 00273
- 911 S Targa 2.7 from 1975 and chassis N° F 91153 10148

- 911 Carrera 2.7 Coupe from 1975 and chassis N° F 91156 00321
- 911 Carrera 2.7 Targa from 1975 and chassis N° F 91156 10120

- 911 S Coupe 2.7 from 1975 and chassis N° F 91152 01530 - USA / CDN version
- 911 S Targa 2.7 from 1975 and chassis N° F 91152 10860 - USA / CDN version

- 911 Carrera 2.7 Coupe from 1975 and chassis N° F 91154 00174 - USA / CDN version
- 911 Carrera 2.7 Targa from 1975 and chassis N° F 91154 10089 - USA /CDN version

Suitable for right and left drive shaft, gearbox side as wheel side.

Sold individually.