Engine flywheel

Flywheel screws for Porsche 944 from 1982 to 1991 :
- 944 phase 1 - 2.5 - 163hp (M44.01 to 04) from 1982 to 1985
- 944 phase 2 - 2.5 - 163hp (M44.05 to 08) from 1985 to 1987- 944 phase 2 - 2.5 - 160hp (M44.09/M44.10) from 1988- 944 phase 2 - 2.5 S - 190hp (M44.40) from 1987 to 1988- 944 phase 2 - 2.7 - 165hp (M44.11/M44.12) from 1989- 944 phase 2 - 3.0 S2 - 211hp (M44.41) from 1989 to 1991
- 944 2.5 Turbo - 220hp (M44.50/M44.51) from 1986 to 1988- 944 2.5 Turbo S/Cup M578 - 250hp (M44.52) from 1988- 944 2.5 Turbo - 250hp (M44.52) from 1989 to 1991
The screw is sold individually , and 9 quantities are required per vehicle.

Flywheel screws for Porsche 968 from 1992 to 1995 :
- 968 3.0 - 240hp (M44.43/M44.44) from 1992 to 1995- 968 Club Sport 3.0 - 240hp (M44.43) from 1993 to 1995
The screw is sold individually , and 9 quantities are required per vehicle.

Flywheel screws for Porsche 924S from 1986 to 1988 :
- 924 2.5 S - 150 hp (M44.07/M44.08) from 1986 to 1987- 924 2.5 S - 160 hp (M44.09/M44.10) from 1988
The screw is sold individually , and 9 quantities are required per vehicle.

Superior CB Performance USA quality
Forged chromoly
Ring: 130 teeth
Diameter: 200mm
Holes: 8 dowel pins
Stock version : 8Kg - Light version : 5.6Kg

Removable 2-in-1 "Dual Weight" flywheel: Combines the advantages of the stock engine flywheel and the lighter version according to need and configuration. Ideal for switching quickly from an original road engine version to a lighter one for more lively revving. Also practical for example ifswitching your Beetle engine to your Camper engine!

For VW Beetle, Buggy, Type 3 & Camper

This flywheel bearing gasket for DYANE and Acadiane (08/1967-07/1987) - 12x18x3mm guarantees the centring of the gearbox tail.

This flywheel sealing ring for Dyane and Acadiane is compatible with all 2cv models and derivatives, whatever the engine.

This brass flywheel ring for DYANE and Acadiane - 12X18X16 mm is true to original.

This Brass flywheel centring bearing ensures the centring and the correct rotation of the flywheel.

This flywheel bearing gasket for Mehari (10/1968-07/1987) - 12x18x3mm guarantees the centring of the gearbox tail.

This flywheel sealing ring for Mehari is compatible with all Mehari models, whatever the engine

This brass flywheel ring for Mehari -12X18X16 mm is faithful to the original.

This Brass flywheel centring bearing ensures the centring and the correct rotation of the flywheel.

covers all pins - for prepared engines

This flywheel bearing oil gasket for AMI 6 and AMI 8 cars (04/1961-06/1978) - 12x18x3mm keeps the gearbox rear joint centred.

This flywheel sealing ring for AMI6 and AMI8 cars is compatible with all models of 2cv cars and derivatives, whatever the engine

This flywheel screw for AMI6 until September 1967 - M8x16mm is true to the original.

Compatible with all 2cv models and derivatives until September 1967, this screw is specific to Citroën models.

This flywheel screw for 2cv Van after 1967 - M8x35mm is compatible with all 2cv models and derivatives after 1967.

These M8 flywheel screws - Long - are 100 pitch and there are 5 of them on flywheels after 1967.

This flywheel screw for 2cv from 1967 to 1970 - M8x35mmf is compatible with all 2cv models and derivatives after 1967.

These M8 flywheel screws - Long - are 100 pitch and there are 5 of them on flywheels after 1967.

This flywheel screw for DYANE and Acadiane - M8x35mm is compatible with all DYANE and Acadiane models.

These M8 flywheel screws - Long - are 100 pitch and there are 5 of them on flywheels after 1967.

This flywheel screw for 2cv and derivatives after 1967 - M8x35mm is compatible with all 2cv models and derivatives after 1967.

These M8 flywheel screws - Long - are 100 pitch and there are 5 of them on flywheels after 1967.

This flywheel screw for Mehari - M8x35mm is compatible with all Mehari models.

These M8 flywheel screws - Long - are 100 pitch and there are 5 of them on flywheels after 1967.

This flywheel screw for AMI 6 and AMI 8 cars after 1967 - M8x35mm is compatible with all AMI 6 and AMI 8 cars after 1967.

These M8 flywheel screws - Long - have a 100 thread and there are 5 of them on flywheels after 1967.

Washer on flywheel fixing screw- Type 1 from 1200 to 1600cc- Type 3 from 1200 to 1600cc- Type CT 1600ccOriginal Volkswagen Classic Parts.

Originesteering wheel for Volkswagen Golf 3
For VW Golf 3 :- 2.8 VR6 174hp (AAA)- 2.9 VR6 190hp (ABV)
Original Volkswagen part

Forged, lightweight flywheel (approx. /- 6kg depending on supplier)
for mounting a type 4 air-cooled engine in a Cox.
Designed to accept a Type 1 clutch mechanism, diameter 200 mm, for installation on a Type 1 gearbox.