Engine flywheel

Dual-mass engine flywheel screw for Porsche 911 type 997 Turbo, GT2 and GT3 :

- 997 3.6 Turbo - 480 hp (M97.70) from 2006 to 2009
- 997 3.6 GT2 - 530 hp (M97.70S) from 2008 to 2009
- 997 3.6 GT3 - 415 hp (M97.76) from 2007 to 2009
- 997 3.8 GT3 - 435 hp (M97.77) from 2010 to 2011
- 997 3.6 GT3 RS - 415 hp (M97.76) from 2007 to 2009
- 997 3.8 GT3 RS - 450 hp (M97.77R) from 2010 to 20118

Dimensions : M10 x 1,25 x 62 mm

Quantity required per vehicle : 9

Porsche origin

Sold individually

Originesteering wheel for Volkswagen Golf 3
For VW Golf 3 :- 2.8 VR6 174hp (AAA)- 2.9 VR6 190hp (ABV)
Original Volkswagen part

This flywheel bearing gasket for Mehari (10/1968-07/1987) - 12x18x3mm guarantees the centring of the gearbox tail.

This flywheel sealing ring for Mehari is compatible with all Mehari models, whatever the engine

Flywheel screws for Citroën Traction 11 CV (from March 1955)Flywheel screw, specifically designed for Citroën Traction 11 CV models produced from March 1955.Dimensions: M9 x 18 mmthese screws must be replaced each time the flywheel is removed, to ensure a secure, long-lasting fit.
Sold individually.
Compatible models :- Traction Avant 11C Commercial 11 "Performance", type 11B from 03/1955 to 1957, Engine, type 11cv D 1911cc (59hp)- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL de 03/1955 à 02/1956, Moteur, type 11cv D 1911cc (59cv)- Traction Avant 11B Berline 4 portes 11 "Performance", type 11B de 03/1955 à 07/1957, Moteur, type 11cv D 1911cc (59cv)

This flywheel screw for 2cv until September 1967 - M8x16mm is true to original.

Compatible with all 2cv models and derivatives until September 1967, this screw is specific to Citroën models.

Steering wheel for VOLKSWAGEN Transporter T25/T3 from 1979 to 1992 for clutch diameter 228mm for all water cooled petrol engines 1.9 and 2.1.

For VOLKSWAGEN Combi Split Brazil (1957-1975)

This flywheel screw for 2cv from 1967 to 1970 - M8x35mmf is compatible with all 2cv models and derivatives after 1967.

These M8 flywheel screws - Long - are 100 pitch and there are 5 of them on flywheels after 1967.

This brass flywheel ring for Mehari -12X18X16 mm is faithful to the original.

This Brass flywheel centring bearing ensures the centring and the correct rotation of the flywheel.

Dual-mass engine flywheel screw for Porsche 993 :

- 993 3.6 - 272 hp Carrera and Carrera 4 from 1994 to 1995
- 993 3.6 - 285 hp Carrera and Carrera 4 from 1996 to 1998
- 993 3.6 - 285 hp Carrera S from 1997 to 1998
- 993 3.6 - 285 hp Carrera 4S from 1996 to 1998
- 993 3.8 - 300 hp Carrera RS from 1995 to 1996
- 993 3.6 - 408 hp Turbo from 1995 to 1998
- 993 3.6 - 450 hp Turbo S from 1997 to 1998
- 993 3.6 - 430 hp GT2 from 1996 to 1998

Dimensions : M10 x 1,25 x 62 mm

Quantity required per vehicle : 9

Porsche origin

Sold individually

Dual-mass engine flywheel screw for Porsche 911 type 996 Turbo, GT2 and GT3 :

- 996 3.6 Turbo - 420 hp (M96.70) from 2000 to 2005
- 996 3.6 Turbo X50 - 450 hp (M96.70) from 2001 to 2005
- 996 3.6 Turbo S - 450 hp (M96.70) of 2005
- 996 3.6 GT2 - 462 hp (M96.70SL) from 2001 to 2004
- 996 3.6 GT2 - 483 hp (M96.70SL) of 2005
- 996 phase 1 3.6 GT3 - 360 hp (M96.76) from 2000 to 2001
- 996 phase 2 3.6 GT3 - 380 hp (M96.79) from 2004 to 2005
- 996 phase 2 3.6 GT3 RS - 380 hp (M96.79) of 2004

Dimensions : M10 x 1,25 x 62 mm

Quantity required per vehicle : 9

Porsche origin

Sold individually

This flywheel bearing lip seal for 2cv A-AZ-AZAM (07/1949-02/1970) - 12x18x3mm guarantees the centring of the gearbox tail.


This flywheel sealing ring for 2cv is compatible with all 2cv models and derivatives, whatever the engine

Screws fastening the Water Boxer flywheel to the crankshaft.
Dimensions: M12 x 1.5 x 20 mm
5 required per engine, sold per unit.
Original Volkswagen Classic Parts.

For VW Transporter T25 / T3, Bus, Van,
Caravelle, Joker, Syncro (4 x 4).
Water-cooled petrol engines
- 1900 (DG, DF, EY, SP)
- 2100 (DJ, MV, SR, SS)

This brass flywheel ring for DYANE and Acadiane - 12X18X16 mm is true to original.

This Brass flywheel centring bearing ensures the centring and the correct rotation of the flywheel.

Engine flywheel for Porsche 911 2.0 :

- 911 2.0 - 130 hp (901.01/05/06) from 1965 to 1967
- 911 S 2.0 - 160 hp à 170 cv (901.02/08/10) from 1967 to 1969
- 911 T 2.0 - 110 hp (901.03/13/16/19) from 1968 to 1969
- 911 L 2.0 - 130 hp (901.06/07) of 1968
- 911 E 2.0 - 140 hp (911.09/11) of 1969

Flywheel screws for Porsche 911 type 964 from 1989 to 1994 :

- 964 3.6 - 250hp (M64.01/02) Carrera 2 from 1990 to 1994
- 964 3.6 - 250hp (M64.01) Carrera 4 from 1989 to 1994

The screw is sold individually , and 9 quantities are required per vehicle.

LUK dual mass steering wheel for Audi A3 (8P)
For Audi A3 (8P) :- 3.2 V6 Quattro 250hp (BDB, BMJ, BUB) up to 2008
Quality Original LUK

130-tooth, 200-mm diameter flywheelsprocket corresponding to original 12-volt assembly for VW Combi Split up to 07/1967.

Slotted bearing fixed in the flywheel and guiding the gearbox shaft,

For E46:
- All models with manual gearbox
(including M3)

Superior quality forged "chromoly
Crown wheel: 130 teeth
Diameter: 200 mm
Drilling: 8 pins
Lightweight version: 5.560kg
Ideal for prepared engines Type 1: 1600cc
Faster revs without compromising torque.

For VW Beetle, Type 3