Bumper

Front bumper in plastic, original type
supplied with base coat finish to be painted
Model without hole for foglamps.

For Transporter T4 phase 3:
- Caravelle all models since 96->
- Multivan all models since 99->
with long nose (oblique headlamps, round radiator grille).

Rear chrome-plated square bumper.
Given the quality of chrome currently on themarket, we cannot guarantee it over time. You are advised to paint the insides of your bumpers with anti-rust paint and look after your chrome at regular intervals.

For VW Combi Bay Window, 08/1972 ->07/1979
since chassis no. 213 2000 001->

Single front bumper
Storage paint finish, to be painted.

For Combi Split 08/1958 ->07/1967

For this Kombi front bumper, only central strip is mentioned.

This is a faithful reproduction to a high quality and thickness matching the original. This bumper piece has a black epoxy paint finish for long-term corrosion protection.

For VW Kombi Type 2 Bay Window
Years: 08/1967 -> 07/1972
Chassis: up to no.->212 2300 000.

This single step on the left-hand side on the front bumper is a faithful reproduction of the original.

It is made of thick steel and to a high quality matching the original! Black epoxy paint finish for long-term corrosion protection.

For VW Kombi Type 2 Bay Window
Years: 08/1967 -> 07/1972
Chassis: up to no.->212 2300 000.

This chrome-plated rear bumper for Kombi has a superior quality finish.

The space between thefittings is correct for years from 08/67 to 07/71.
Your fittings must be changed if your Kombi is the 1972 model (08/71 ->07/72, which can be identified by the large rear lights and small bumpers). In this case, you will need to remove the welded rear plates and drill attachment holes to installit.

Rear bumper for Kombi Bay Window, 08/1967 ->07/1972
up to chassis no.->212 2300 000.
Adaptable on pick-up.

Rear bumper Original VW Brazil, fitted on the last Combis
Storage paint finish, to be painted.

For VW Combi Bay Window, 08/1972 ->07/1979
since chassis no. 213 2000 001->

Left rear bumper absorber for VOLKSWAGEN Transporter T4 from 1996 to 2003.

Rear plastic ABS bumper center blade to paintoriginal type perfect to replace your old bumper will give you full satisfaction.
Don't let your old model, damaged, scratched, pressed on your vehicle, start over on a new model without hesitation!!

Delivered without the side tips for VW Transporter T4 phase 1

Left-hand corner in black ABS plastic, original type
Model without hole for foglamp.

For Transporter T4 phase 1 &2 all models 09/90 ->12/95
except Pick-up version.

Front bumper made of 2.3 mm thick heavy-duty sheet metal without hole for rubber moulding on VOLKSWAGEN Transporter T25/T3 from 05/1979 to 07/1992.
Finish: black paint
Delivered on its own, without fittings or end caps.

Front bumper in plastic, original type
supplied with base coat finish to be painted
Model with holes for foglamps.

For Transporter T4 phase 3:
- Caravelle all models since 96->
- Multivan all models since 99->
with long nose (oblique headlamps, round radiator grille).

Bolt cover original off-white colour (Pastel 90D)
finishes off yourbumpers.
For:
- Combi Bay Window 08/1972 ->07/1979
since chassis no.213 2000 001->

M5 type front bumper for Bmw 5 Series:
- Compatible with all Bmw 5 Series E34 Sedan and Touring versions from 07/1987 to 06/1996, all engines included.

Chrome front bumper with rubber strip for Fiat 500 N, D, F, L and R (1957-1975)< br>This bumper has a central rubber strip. For the models listed below:- Fiat 500 N from 1957 to 1960- Fiat 500 D from 1960 to 1965- Fiat 500 F from 1965 to 1968- Fiat 500 L from 1968 to 1972- Fiat 500 R from 1972 to 1975

Front right bumper corner in black plastic for Volkswagen Golf 1 until 07/1978 :

- 1.1L 50hp from 04/1974 to 07/1978 (engine code FA)
- 1.5L 70hp from 02/1974 to 12/1975 (engine code FH)
- 1.5L 70hp from 08/1977 to 07/1978 (engine code JB)
- 1.5L 85hp from 02/1974 to 09/1975 (engine code FD)
- 1.6L 65hp from 12/1976 to 07/1978 (engine code FV)
- 1.6L 75hp from 01/1976 to 07/1978 (engine code FN)
- 1.6L 75hp from 09/1975 to 07/1977 (engine code FP)
- GTI 1.6L 110hp from 06/1976 to 07/1978 (engine code EG)
- 1.5D 50hp from 08/1976 to 07/1978 (engine code CK)

This part is used as a protectivecap on the right-hand passenger side of the small sheet-metal front bumper.

Front bumper for Peugeot 205
This ABS front bumper is suitable for all standard Peugeot 205 models without specific GTI bodywork.
Does not include lower spoiler
- 1.0 GL, GE, XL, XE, Junior 954cm3 45hp (XV8) from 02/1983 to 07/1987- 1.0 XL, GL, Junior 954cm3 45hp (TU9) from 08/1987 to 07/1992- 1.0 XE, XR, Junior catalyzed 954cm3 50hp (TU9M/Z) from 08/1992 to 07/1995- 1.1 GL, GR, XL, XR 1124cm3 50hp (XW7) from 02/1983 to 07/1987- 1.1 GL, XL, GR, XR 1124cm3 55hp (TU1) from 08/1987 to 07/1992- 1.1 XE, GE, XL, GL, XR, GR catalysed 1124cm3 60hp (TU1M/Z) from 08/1992 to 07/1995- 1.4 GR, SR, XR 1360cm3 60hp (XY7) from 02/1983 to 07/1987- 1.4 GT, XT, XS 1360cm3 80hp (XY8) from 02/1983 to 07/1987- 1.4 GR, SR, XR 1360cm3 65hp (TU3) from 08/1987 to 07/1988- 1.4 GR, SR, XR 1360cm3 69hp (TU3A) from 08/1988 to 07/1990- 1.4 GR, SR, XR 1360cm3 75hp (TU3F2) from 08/1990 to 07/1992- 1.4 GR, SR, XR Catalyzed 1360cm3 75hp (TU3M/Z) from 08/1992 to 12/1998- 1.4 GT, XS 1360cm3 85hp (TU3S) from 08/1987 to 07/1992- 1.6 GT, XS 1580cm3 89hp (XU5M/Z) from 08/1992 to 07/1993- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1985 to 07/1987- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1987 to 07/1993- 1.6 Automatic catalysed 1580cm3 89hp (XU5M/Z) from 08/1993 to 08/1994- 1.8 GLD, GRD, SRD 1769cm3 60hp (XUD7) from 09/1983 to 07/1987- 1.8 XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1984 to 07/1987- 1.8 GLD, GRD, GTD, XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1987 to 12/1998- 1.8 Dturbo 1769cm3 78hp (XUD7T) from 08/1990 to 12/1998
Peugeot 205 Cabriolet: - 1.1 CJ 1124cm3 55hp (TU1) from 08/1987 to 07/1992- 1.1 CJ Catalysée 1124cm3 60hp (TU1M/Z) from 08/1992 to 07/1995- 1.4 CT 1360cm3 80hp (XY8) from 07/1986 to 07/1987- 1.4 CJ 1360cm3 65hp (TU3) from 08/1987 to 07/1988- 1.4 CJ 1360cm3 69hp (TU3A) from 08/1988 to 07/1990- 1.4 CJ 1360cm3 75hp (TU3F2) from 08/1990 to 07/1992- 1.4 Cabriolet 1360cm3 75hp (TU3M/Z) from 08/1992 to 07/1995

DANSK Rear right bumper for Porsche 911 and 912 from 1969 :

-> Porsche 912 :
- 912 1.6 of 1969

-> Porsche 911 :
- 911 2.0 T / E / S of 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973

Front right bumper cover for Mini R55:
Mini R55 Clubman:
- Cooper 1.6L 120hp from 10/2006 to 07/2010 (engine code N12B16)- One 1.4L 95hp from 08/2008 to 02/2010 (engine code N12B14)- Cooper 1.6L 122hp from 03/2009 to 08/2010 (engine code N16B16)- One 1.6L 98hp from 03/2009 to 08/2010 (engine code N16B16)- Cooper D 1.6L 112hp from 04/2009 to 08/2010 (engine code N47C16)- Cooper D 2.0L 112hp from 11/2010 to 08/2010 (engine code N47C20)
Warning! Not suitable for Cooper S SD and John Cooper Works trim levels.

This narrow rear bumper for 2CV A-AZ (07/1949-03/1963) is specific to vintage models.

This slim rear bumper for vintage 2CV is compatible with all 2CV models before March 1963.

Compatible models :
- 2CV A type A: 07/1949 to 03/1961
- 2CV AZ type AZ: 10/1954 to 03/1963
- 2CV AZL type AZ: 12/1956 to 03/1963
- 2CV AZLP type AZ: 09/1957 to 03/1963