Steering box

Steering unit relay metal/rubber silentblock
External diameter: 38 mm

For Beetle 1302, 08/1970 ->01/1972
chassis no. 111 2000 001 ->112 2575 326.

Plates / washers kit to tighten the attachment bolts on the front axle with pivots and tighten the steering box attachment nuts.
Wolfsburg West quality, the reproduction of these parts is faithful to the original.
Includes 2 plates for the front axle with pivots and 2 safety washers for the steering box.

- For Beetles, Karmann Ghia and Type 3.
Years: ->1965
- For VW Split Bus,
Years: ->1967

Sealing ring on column/selector side steering column shaft
Dimensions: 18 x 30 x 7 mm.

For Beetle 1302 & 1303, 08/1970 ->07/1974
- 1302 chassis No.111 2000 001 ->112 3200 000.
- 1303 chassis No.133 2000 001 ->134 2999 999.
Models with steering unit.

Worm screw pin (roller bearing) on ZF or ATE brand steering gearbox. Model in one part with threading diameter: 12 mm. This wear part is the main cause for the play that occurs with your steering wheel over the years. Rediscover a gearbox that is almost new and get back the steering feeling you had when your Kombi first left the factory!

For VW:
- Kombi Split, 08/1966 -> 07/1967
from chassis no. 117 000001 ->
- Kombi Bay Window, 08/1967 -> 07/1972
up to chassis no. -> 212 3200 000.

Spi seal for steering lever
Dimensions: 27 x 37 x 7 mm

- For VW Combi Bay Window,
Years: 08/1968 ->07-1972

A worn or defective top spinnaker seal can lead to fluid leakage, making steering more difficult or less precise, which can affect the operation of the gearbox and therefore the safety of the vehicle. Replacing this seal requires dismantling the steering box, which in turn requires a certain amount of technical expertise. If you notice fluid leaks or steering becoming harder, this may be a sign that the spi gasket needs replacing.
This upper steering box spi gasket fits VW Combi Bay Window from 08/1972 to 07/1979.Dimensions: 28 x 38 x 7 mm

Steering gear adjustment washer for Brazilian VW Combi Bay Window from 1976 to 1983.Thickness: 0.05mm

Sealing ring for on the pitman arm-side steering screw axle, 22 mm diameter. Original quality.

For VW Split Screen Beetle
Years: 1947 ->09/1952
Chassis: up to no. ->397 022.

Steering box seal for Brazilian VW Combi Split from 1957 to 1975.

Complete repair kit for the steering pivot
Very often the cause of play in the steering.

For VOLKSWAGEN Combi Split Brazil (1957-1975)

12mm steering gear adjustment washer for VW Combi Bay Window from 08/1967 to 07/1972.

Bushing to repair steering pivots.
Sold individually, requires 2 per side.
Sold individually.

For VOLKSWAGEN Combi Split Brazil (1957-1975)

The steering lever spi gasket for a VW Combi is an essential part of the steering system, especially in models where the steering is equipped with lever mechanisms.
The main purpose of the spigot seal is to create a seal around the steering lever, which is the part that transmits steering wheel movements to the steering mechanisms (in particular the tie rods and rack).
It prevents dust, moisture and other contaminants from entering the steering mechanism, which could lead to premature wear of internal components (such as bearings or seals).By reducing internal friction between the steering lever and other moving parts, it helps ensure smooth operation of the steering system and more precise, comfortable steering.By protecting the internal components of the steering box from moisture and dirt, the steering lever spigot seal helps prevent rust and corrosion of metal parts, which can extend steering life.
If you notice steering fluid leaking around the steering lever or steering column, this may be due to a faulty spinnet seal.A worn spinnaker seal can make steering more difficult or less responsive.The presence of dirt or rust in this area may indicate that the spigot seal is no longer protecting the steering gearbox properly.
This steering lever spigot gasket is intended for VW Combi Bay Window from 08/1972 to 07/1979.Dimensions: 22 x 32 x 7 mm

Ring for repairing steering pivots.Sold individually, 2 required per side.
For VW Combi Split up to 09/1962

Steering box for Brazilian VW Combi Clipper from 1976 to 1983, only for Brazil versions, not suitable for German models.

Steering arm on steering box for VW Combi Bay Window T2B from 08/1972 to 07/1979 from chassis No. 213 2000 000.

12mm adjustment washer for VW Combi Split up to 07/1967.

Worm screw finger (roller bearing) on ZF or ATE steering box. Two-part model with 10 mm thread diameter. This wearing part is the main cause of the play that has appeared on your steering wheel over the years. Your steering wheel will feel like new, just like when your Combi left the factory!

Made in Europe!

For VW Combi Split, up to 07/1966
up to chassis N°->216 198 668.

10mm adjustment washer for VW Combi Split up to 07/1967.

Lower cap on steering box tube floor for VW Combi Bay Window from 08/1967 to 03/1974