Brake shoes

Set of 4 brake shoes for 2 wheels.
Position : Rear
Dimensions: 230 x 30 mm

For Beetle :
- 1200, 08/1964 ->11/1967
Chassis N° 115 000 001 ->118 328 505
- 1300, 1500, 08/1964 ->07/1967
Chassis N° 115 000 001 ->117 999 000

These front brake shoes for DYANEs (08/1967-08/1977) - 200mm are a quality remanufacture.

This set of 4 front brake shoes is compatible with 2cv saloons and derivatives with 200 mm front brake drums.

This set of rear brake shoe linings is intended for Citroën Traction 11cv models after 1945.
Measuring 10" (inches), the kit includes linings and rivets for a complete axle.
Compatible models:- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL de 02/1945 à 01/1955, Moteur, type 11cv perfo 1911cc (56cv)- Traction Avant 11B Berline 4 portes 11 "Performance", type 11B de 02/1945 à 01/1955, Moteur, type 11cv perfo 1911cc (56cv)- Traction Avant 11C Commercial 11 "Performance", type 11B from 03/1954 to 1957, Engine, type 11cv D 1911cc (59hp)- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL de 02/1955 à 02/1956, Moteur, type 11cv D 1911cc (59cv)- Traction Avant 11B Berline 4 portes 11 "Performance", type 11B de 02/1955 à 07/1957, Moteur, type 11cv D 1911cc (59cv)

For drum measuring 200 x 40 mm

Easy mounting with these MEYLE Original brake shoes, pre mounting with levers, push rods and springs.
For Golf 3 with drums (except Syncro 4x4)

Suitable for:
- Golf 2 Country / Syncro (4 x 4)
- Golf 3 Syncro (4 x 4)
Models with rear, drum brakes.

Exterior diameter: 230 mm
Width of linings: 40 mm

This brake-shoe return spring is fitted to the upper part of the front or rear brake shoes on Citroën Traction 7hp and 11hp models .
On the 15hp Traction, it is placed on the upper part of the rear brake shoes only.
Dimensions: 136x10mm
Compatible models:Traction 7 (01/04/1934-1939)Traction 11 (11/1934-07/1957)Traction 15/6 (02/1938-10/1956) rear axle only

This set of front brake shoe linings is intended for Citroën Traction 11cv models after 1945.
Measuring 12" (inches), the kit includes linings and rivets for a complete axle.
Compatible models:- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL de 02/1945 à 01/1955, Moteur, type 11cv perfo 1911cc (56cv)- Traction Avant 11B Berline 4 portes 11 "Performance", type 11B de 02/1945 à 01/1955, Moteur, type 11cv perfo 1911cc (56cv)- Traction Avant 11C Commercial 11 "Performance", type 11B from 03/1954 to 1957, Engine, type 11cv D 1911cc (59hp)- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL de 02/1955 à 02/1956, Moteur, type 11cv D 1911cc (59cv)- Traction Avant 11B Berline 4 portes 11 "Performance", type 11B de 02/1955 à 07/1957, Moteur, type 11cv D 1911cc (59cv)

This brake shoe spring is compatible with front and rear brake shoes on Citroën Traction 7 and 11hp models.
The spring is fitted between the brake plate and the brake shoes. There are 4 springs per brake plate.
Dimension: 10.5x13mm

For Polo 2 and 3:
- 1.0/1.1/1.3/1.3 G40/1.3 D/1.4 D

Set of 4 rear brake shoes for Citroën DS.
These shoes are intended for saloon models only.
They are designed for 255mm diameter drums .
Compatible models:DS 19 Sedans and Cabriolets (1911cc) - (1956-03/1965)DS 19/20 Sedans (1985cc) - (1966-1975)DSuper/DSpécial (1985cc) - (1972-1975)DS 21 Sedans and Cabriolets (2175cc) - (1966-1969)DS 23 Sedans (2347cc) - (1973-1975)

MEYLE rear brake shoes kit for Volkswagen polo 86C
For Polo 86/86C from 81 ->94 :- 0.9 ->1.3 (including G40)- 1.3 and 1.4 Diesel
Easy installation with these pre-assembled shoes, including pressure rods and springs

For:
- Golf 1, 08/78 ->07/93 (excluding Caddy)
- Scirocco 08/78->
- Golf 2, 84 ->92 (excluding 4WD)
- Polo 6N, models without ABS 94->

Easy assembly with these pre-assembled shoes, with pressure rods and springs

Set of rear brake shoes for 2 wheels essential for starting a new braking system, remember to check the condition of wheel cylinders, springs, brake pads... for your safety and that of others, don't hesitate at the slightest doubt.
Suitable for :
- Combi Split from 08/1963 to 07/1967 since chassis n°1144282.
- Combi Bay Window from 08/1967 to 07/1970 until chassis n°2102300000.

Brake drum shoes are an essential component of the drum brake system. They play a crucial role in the braking process.Brake shoes are semicircular metal parts fitted with friction pads (composite material) on their outer surface.When the driver depresses the brake pedal, a hydraulic cylinder pushes the shoes outwards inside the brake drum, exerting pressure against the drum's inner surface.This friction between the shoes and the drum slows and stops the wheel, bringing the car to a halt.If an abnormal noise is heard, it may be a sign that the brake shoes are worn and the friction material is too thin or missing. This reduces brakingefficiency, lengthens the vehicle's stopping distance or even creates a braking imbalance, causing the vehicle to roll away.It's essential to regularly check the condition of the brake shoes. If they are too worn, they must be replaced to ensure vehicle safety. In addition to the shoes, the drums must also be inspected, as a warped or worn drum can lead to a loss of braking efficiency.
This set of rear brake shoes, suitable for 2-wheelers, is essential if you want to start braking again, so don't forget to check the condition of wheel cylinders, springs, brake pads, etc. For your own safety and that of others, don't hesitate at the slightest doubt.Fits Brazilian VW Combi Split from 1957 to 1975.

Brake drum shoes are an essential component of the drum brake system. They play a crucial role in the braking process.Brake shoes are semicircular metal parts fitted with friction pads (composite material) on their outer surface.When the driver depresses the brake pedal, a hydraulic cylinder pushes the shoes outwards inside the brake drum, exerting pressure against the drum's inner surface.This friction between the shoes and the drum slows and stops the wheel, bringing the car to a halt.If an abnormal noise is heard, it may be a sign that the brake shoes are worn and the friction material is too thin or missing. This reduces brakingefficiency, lengthens the vehicle's stopping distance or even creates a braking imbalance, causing the vehicle to roll away.It's essential to regularly check the condition of the brake shoes. If they are too worn, they must be replaced to ensure vehicle safety. In addition to the shoes, the drums must also be inspected, as a warped or worn drum can lead to a loss of braking efficiency.
This set of rear brake shoes, suitable for 2-wheelers, is essential if you want to start braking again, so don't forget to check the condition of wheel cylinders, springs, brake pads, etc. For your own safety and that of others, don't hesitate at the slightest doubt.Suitable for VW Combi Split from 08/1963 to 07/1967 since chassis n°1144282.

Set of 4 brake shoes for 2 wheels.
Position : Front
Width: 50 mm

For Combi Split, 03/1955 ->07/1963
Chassis N° 117 902 ->1 144 281.

For Audi 100, all versions with drum brakes

Set of 4 front brake linings only, to be riveted to the original 2-wheel shoes.Original Volkswagen Classic Parts.
For VW Type 3 all modelsYears: 08/1963 ->07/1965Chassis: N° 221 975 ->315 220 883.
Dimensions :- Width: 50mm- Length : 270mm- Thickness : 4mm- Rivet hole diameter: 4mm

Rear Brake Shoe Kit for Peugeot 205

This rear brake shoe kit superior to the original quality is from the MEYLE Original Quality range.

These shoes are then stronger and offer a significantly longer life compared to other original type brake shoes.

Kit without wheel cylinder.

Suitable only for the following models:

Peugeot 205 Phase I, 3 and 5 door versions

- 205 1.6 L - 72hp from 03/1987 to 10/1987
- 205 1.6 L - 75hp from 08/1986 to 10/1987
- 205 GTI 1.6 L - 103hp from 12/1984 to 10/1987
- 205 GTI 1.6 L - 120hp from 02/1983 to 07/1987

Peugeot 205 Cabriolet

- 205 CJ 1.1 L - 60hp from 10/1989 to 12/1994
- 205 CJ 1.4 L - 60hp from 03/1988 to 05/1989
- 205 CTI 1.9 L - 101hp from 08/1987 to 07/1990
- 205 CTI 1.9 L - 102hp from 10/1987 to 12/1994

Peugeot 205 Phase II, 3 and 5 door versions

- 205 1.1 L - 60hp from 07/1989 to 09/1998
- 205 1.4 L - 75hp from 07/1988 to 09/1998
- 205 1.6 L - 72hp from 10/1987 to 09/1998
- 205 1.6 L - 75hp from 10/1987 to 09/1998
- 205 Automatic 1.6 L - 88hp from 05/1990 to 09/1998
- 205 Diesel 1.7 L - 60hp from 07/1987 to 09/1998
- 205 XDT 1.8 L - 79hp from 08/1990 to 05/1997
- 205 Diesel 1.9 L - 64hp from 10/1987 to 09/1998
- 205 GTI 1.9 L - 102hp from 10/1987 to 05/1989
- 205 GTI 1.9 L catalyzed - 102hp from 10/1987 to 07/1994

Peugeot 205 Utility

- 205 Van 1.7 L Diesel - 60hp from 03/1994 to 05/1997