Pedals

Pedal mounting bracket for Golf 2 and Jetta 2 with manual or automatic transmission.

Suitable for all engines (except G60 with hydraulic clutch)

This diamond pedal pad for Renault 4 (10-1961/12/1993) is compatible with all R4 Sedan or Van models.


In rubber, this pedal pad for R4 is compatible with many models of the diamond brand.

Push rob on accelerator pedal linkage.
Genuine quality.

For VW Combi Bay Window, 08/1967 ->07/1972
up to chassis N°->212 2300 000.

Blanking cap, black/grey colour code 043
Suitable for door hinges or accelerator pedal housing for VOLKSWAGEN Type 3 and LT.

Accelerator pedal alone, original type.

For VW Combi Bay Window, 08/1972 ->07/1979
since chassis no. 213 2000 001->

Ventilation flap return spring
Located behind the turbine on type 1 engines

For VW cox (08/1964-)

Cable throttle control,

For E21 with manual or automatic gearbox:
- All models
(except RHD: right-hand steering wheel)

Throttlepedal for Bmw E3:
Bmw E3:
- 2.8L 6cyl 170hp from 09/1973 to 02/1977 (engine code m30)- 2500 6cyl 150hp from 07/1969 to 02/1977 (engine code m30)- 2800 6cyl 170hp from 09/1973 to 02/1975 (engine code m30)- 3.0L 6cyl 180hp from 12/1974 to 02/1977 (engine code m30)- 3.0S 6cyl 180hp from 05/1971 to 02/1977 (engine code m30)- 3.0Bav 6cyl 180hp from 09/1973 to 07/1974 (engine code m30)- 3.0si 6cyl 200hp from 09/1973 to 02/1977 (engine code m30)- 3.3L 6cyl 190hp from 10/1973 to 08/1975 (engine code m30)- 3.3Li 6cyl 200hp from 07/1975 to 02/1977 (engine code m30)

Clutchpedal spacer and bush kit for Peugeot 205 all models
This kit contains the spacer and two bushes to secure your clutch pedal without any play.
For Peugeot 205 all models, including GTI, CTI, Rallye, Dturbo

Replaces the accelerator pedal for a Retro effect
Chrome footplate and black roller. Easy to fit.

For Beetle, Karmann-Ghia, Type 3, 181, Buggy

Anti-slip rubber on brake and clutch pedals is an essential part to ensure better grip and safety, this type of rubber or coating is designed to offer more traction on the pedal, reducing the risk of foot slippage, especially in wet weather.This anti-slip rubber on the brake or clutch pedal is suitable for VW Combi Bay Window all models from 08/1967 to 07/1979.
High-quality original version.
Design may vary according to availability.

For vehicles with manual gearbox

Accelerator rod bushing for:

- 911 from 1965 to 1989
- 912
- 930
- 914

Pedal bushing for:
- 911 from 1965 to 1989
- 912
- 914
- 930

FEBI brake pedal cover for Bmw E9: Bmw E9 : - 2.5 cs 6cyl 150hp from 05/1974 to 11/1975 (engine code m30)
- 3.0 cs 6cyl 180hp from 10/1973 to 11/1975 (engine code m30)
- 3.0 csi 6cyl 200hp from 10/1973 to 11/1975 (engine code m30)
- 3.0 csiL 6cyl 200hp from 01/1974 to 11/1975 (engine code m30)
- 3.0 csl 6cyl 206hp from 10/1973 to 06/1973 (engine code m30) Warning! Not suitable for Bmw E9 2800 cs engine code m30.

Replacement castor for gas pedal pedal

For VW Cox and Karmann-Ghia (08/66-)
For VW Type 3 (10/64-)
For VW Type 181

Return spring for gas pedal pedal

For VW Cox

Accelerator pedal shaft
8x18mm

Original VW classic parts

For VW Cox and Karmann-Ghia (08/1957-)
For VW Kübel 181 (08/1969-12/1979)
For VW Type 3 (04/1961-07/1972)

Brake and clutch pedal cover for Porsche 356 pré-A, A, B and C :

-> Porsche 356 pre-A :
- 356 1100 - 40 hp (369) from 1950 to 1954
- 356 1300 - 44 hp (506 and 506/2) from 1951 to 1955
- 356 1300 S - 60 hp (589 and 589/2) from 1954 to 1955
- 356 1500 Cabriolet - 60 cv (527) from 1952
- 356 1500 - 55 hp (546 and 546/2) from 1953 to 1955
- 356 1500 S - 70 hp (528 and 528/2) from 1953 to 1955

-> Porsche 356 A :
- 356 A 1300 - 44 hp (506/1) from 1956 to 1957
- 356 A 1300 S - 60 hp (589/2) from 1956 to 1957
- 356 A 1600 - 60 hp (616/1) from 1956 to 1959
- 356 A 1600 S - 75 hp (616/2) from 1956 to 1959

-> Porsche 356 B T5 :
- 356 B 1600 - 60 hp (616/1) from 1960 to 1961
- 356 B 1600 S - 75 hp (616/2) from 1960 to 1961
- 356 B 1600 Super 90 - 90 hp (616/7) from 1960 to 1961

-> Porsche 356 B T6 :
- 356 B 1600 - 60 hp (616/1) from 1962 to 1963
- 356 B 1600 S - 75 hp (616/12) from 1962 to 1963
- 356 B 1600 Super 90 - 90 hp (616/7) from 1962 to 1963

-> Porsche 356 C :
- 356 C 1600 - 75 hp (616/15) from 1964 to 1965
- 356 SC 1600 - 95 hp (616/16) from 1964 to 1965

Accelerator rod bushing for Porsche 356 B T5, T6 and C :

-> Porsche 356 B T5 :
- 356 B 1600 - 60 hp (616/1) from 1960 to 1961
- 356 B 1600 S - 75 hp (616/2) from 1960 to 1961
- 356 B 1600 Super 90 - 90 hp (616/7) from 1960 to 1961

-> Porsche 356 B T6 :
- 356 B 1600 - 60 hp (616/1) from 1962 to 1963
- 356 B 1600 S - 75 hp (616/12) from 1962 to 1963
- 356 B 1600 Super 90 - 90 hp (616/7) from 1962 to 1963

-> Porsche 356 C :
- 356 C 1600 - 75 hp (616/15) from 1964 to 1965
- 356 SC 1600 - 95 hp (616/16) from 1964 to 1965

These bushings are found from gearbox N°35001 (1960)

Quantity needed : 2

Sold individually