Fuel filler hose

Petrol tank filling elbow

For Combi Split Brazil (1957-1975)

Rubber elbow pipe for connection between the "T"-piece for the ventilation circuit and fuel tank. Original quality.

For VW Beetle, 1302, 08/1970 ->07/1972
Chassis no. 110 2000 001 ->112 3200 000.

Reinforced rubber hose to connect the fill cap to the fuel tank, all petrol 7 diesel models.
Internal diameter: 37 mm
Thickness: 5 mm
Length: 170 mm
Original Volkswagen Classic Parts.

For VW :
- Golf 1 Saloon, Jetta 1, 04/74 -> 02/84
- Golf 1 Convertible, 08/78 -> 07/93 (without catalytic converter)
- Scirocco 1 & 2, 02/74 -> 07/92 (without catalytic converter)

Rubber T-connector hose from fuel tank vent to air filter.Very important connection, prevents fuel vapors from entering the cabin and engine compartment.Diameters: 2 x 5.5 mm - 1 x 4 mm
For VW Combi Bay Window T2B from 08/1971 to 07/1977 and chassis no. 2122000 001 to no. 217 2300 000.

Short fuel filler neck extension for VW Combi Bay Window (08/1973 to 07/1979)
Length: 120 mm

Seal between the filling spout and the tankinlet. Outer diameter 50 mm.

For Transporter T25/T3, 08/1983 ->07/1992
since chassis no. 24-E-000 214->
All Petrol engines & Diesel

This tank filler neck gasket for 2cv and derivatives - Grey is installed on the rear wing.
It ensures the sealing and maintenance of the fuel filler neck.

Rubber reinforced flexible for connection between the
gasoline tube and thetank.
Long : 170 mm

Reinforced rubber hose for connection between fuel filler neck and tank, specific models for petrol engines with catalytic converters.
Interior diameter: 37 mm
Thickness: 5 mm
Length: 225 mm
For:
- Golf 1 cabriolet with catalytic converter, 01/84 ->07/93
from chassis no. 15-E-011 291->
- Scirocco with catalytic converter, 01/84 ->07/92
from chassis no. 53-E-022 075->

Opt for SAMCO qualitywith this connection.

Designed for petrol or Diesel, this hose connects the fuel filler neck and the fuel tank of your Golf

For:
- Golf 1 saloon, Jetta 1, 04/74 ->02/84
- Golf 1 cabriolet, 08/78 ->07/93 (without catalytic converter)
- Scirocco 1 & 2, 02/74 ->07/92 (without catalytic converter)

For Scirocco 1 & 2,
from 02/74 ->07/92,
petrol engines (without catalytic converter)

Short sleeve for filling petrol tank
Diameter: 56 mm
Length: 120 mm

For Combi Bay Window 08/1967 ->07/1971
chassis no. 218 000 001 ->211 2300 000.

Original type tank filler tube
For K-Jetronic injection model or Carburetor :
- Golf 1 Berline ->84
- Golf 1 Cabriolet (until chassis n°->15-E-011 290) ->84

Located in the wing, this piece receives all the wheel
projections! Do not let the rust ruin the fuel and
injection circuit of your Golf! Part to be adapted,
the attachment point can vary according to models and years.

Petrol tank filling elbow

For Combi Bay Window 08/1973 ->07/1979
Since chassis no. 214 2000 001->

Tank filler neck for 1/4-turn cap for Golf 1 caddy from 1983 ->1992

The plastic tank spout sleeve for 2cv ensures the top seal of the tank.

Made of rubber, it connects the plastic tank to the filler neck.

Rubber pot on top of fill spout for Passat 3 Petrol or Diesel, Saloon or Break

Top of fuel tank filling spout. Femaleplate forlocking the cap. Fixed using 3 screws as for the original.

For VW Transporter T25/T3, Bus,
Caravelle, Syncro (4 x 4), Joker
Years: 05/1979 -> 07/1992
Petrol & Diesel engines.

This fuel filler neck connects the neck on the body of your Citroën DS to the neck on the fuel tank.
It is compatible with all Citroën DS sedans and station wagons.
dimension 38x47x163

This gasket for the fuel filler neck for 2cv - Black is installed on the rear wing.
It ensures the sealing and maintenance of the fuel filler neck.