Car sealing

Aluminium magnetic drain plug seal 22 x 27 mm for Porsche 964 :

- 964 3.6 Carrera 2 and Carrera 4 from 1989 to 1994
- 964 3.6 Carrera 2 and Carrera 4 Turbo-Look factory from 1991 to 1994
- 964 3.6 - 260 hp Carrera RS from 1992
- 964 3.3 - 320 hp Turbo from 1991 to 1992
- 965 3.6 - 360 hp Turbo from 1993 to 1994

Sold individually.

Aluminium magnetic drain plug seal 22 x 27 mm for Porsche 911 type 993 :

- 993 3.6 - 272 hp (M64.05/06/07/08) Carrera and Carrera 4 from 1994 to 1995
- 993 3.6 - 285 hp (M64.21/22/23/24) Carrera and Carrera 4 from 1996 to 1998
- 993 3.6 - 285 hp (M64.21/22/23/24) Carrera S from 1997 to 1998
- 993 3.6 - 285 hp (M64.21/22/23/24) Carrera 4S from 1996 to 1998
- 993 3.8 - 300 hp (M64.20) Carrera RS from 1995 to 1996
- 993 3.6 - 408 hp (M64.60) Turbo from 1995 to 1998
- 993 3.6 - 450 hp (M64.60S) Turbo S from 1997 to 1998
- 993 3.6 - 430 hp (M64.60R) GT from 1996 to 1998

Sold individually.

Aluminium magnetic drain pluggasket 22 x 27 mm for Porsche 997:
- 997 3.6 Turbo - 480 hp from 2006 to 2009- 997 3.6 GT3 - 415 hp from 2007 to 2009- 997 3.8 GT3 - 435 hp from 2010 to 2011- 997 3.6 GT3 RS - 415 hp from 2007 to 2009- 997 3.8 GT3 RS - 450 hp from 2010 to 2011- 997 4.0 GT3 RS - 500 hp from 2012- 997 3.6 GT2 - 530 hp from 2008 to 2010- 997 3.6 GT2 RS - 620 hp from 2011
Sold individually.

This flat copper drain gasket for 375 and 425cc engine for 1970 2cv Avant - 22-27-1.5mm is for old 2cv models.
It is also used to seal the gearbox drain plug for all 2cv models and derivatives and for the brake fluid reservoir.

This flat copper drain gasket for 375 and 425cc engines in 2cv Van - 22-27-1.5mm is for old 2cv models.
It is also used to seal the gearbox drain plug for all 2cv models and derivatives and for the brake fluid reservoir.

This flat copper drain gasket for 375 and 425cc engines in 2cv models and derivatives - 22-27-1.5mm is for old 2cv models.
It is also used to seal the gearbox drain plug for all 2cv models and derivatives and for the brake fluid reservoir.

This copper crush drain gasket for DYANE and Acadiane - 16mm is compatible with DYANE and Acadiane vehicles with 435 and 602cc engines.

Made of copper, it flattens when tightenedto guarantee the engine's seal.

This copper crush drain gasket for Mehari - 16mm is compatible with all models of Mehari.

Made of copper, it flattens when tightenedto guarantee the engine's seal.

This copper squeeze gasket for AMI 6 and AMI 8 cars - 16mm is compatible with AMI 6 and AMI 8 cars

Made of copper, it squeezes when tightened to keep the engine watertight.

This crush copper drain gasket for 2cv Van - 16mm is compatible with 2cv models and derivatives with 435 and 602cc engines.

Made of copper, it flattens when tightenedto guarantee the engine's seal.

This crush copper drain gasket for 1970 2cv Avant - 16mm is compatible with 2cv models and derivatives with 435 and 602cc engines.

Made of copper, it flattens when tightenedto guarantee the engine's seal.

This crush copper drain gasket for 2cv (02/1970-07/1990) - 16mm is compatible with 2cv models and derivatives with 435 and 602cc engines.

Made of copper, this drain gasket for 2cv flattens when tightened to ensure the engine is watertight.

This crushable copper drain gasket for Citroën traction (11/1934-07/1957) - 16mm is compatible with Citroën traction 11 with type 11D engine.
Made of copper, this drain gasket for traction crushes when tightened to guarantee engine tightness.
compatible models:- Traction Avant 11C Commerciale 11 "Performance", type 11B from 03/1954 to 1957, Engine, type 11cv D 1911cc (59hp)- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL from 02/1955 to 02/1956, Engine, type 11cv D 1911cc (59cv)- Traction Avant 11B Berline 4 portes 11 "Performance", type 11B de 02/1955 à 07/1957, Moteur, type 11cv D 1911cc (59cv)

For this complete oil change kit, Mecatechnic has selected quality products including :
- 1 5 L can of GULF Classic 20W50 oil, specifically developed for the engines ofvintage orvintagetimers from the 1950s to the 1970s.- 1 oil strainer filter for 14.5 mm oil suction pipe (most VW aircooled engines, except "pied-moulé" engines).- 2 original quality paper gaskets for all VW type 1 engines since 1960 (except "pied-moulé" engines).- 1 drain plug gasket 14 x 20 x 1 mm- 6 drain plate gaskets.
Dear collector, despite the care we take with packaging, this metal canister may arrive damaged.The very thin metal of which it is made is fragile and deforms at the slightest pressure, but the contents of the canister cannot be altered in any way.In the event of damage, we will not be able to make an exchange. Thank you for your understanding.

Oil cooler seal to which the oil filter is screwed. German quality, it fits all Porsche 944 :

- 944 2.5 - 163 hp from 1982 to 1985
- 944 2.5 - 163 hp from 1985 to 1987
- 944 2.5 - 160 hp from 1988
- 944 2.5 S - 190 hp from 1987 to 1988
- 944 2.7 - 165 hp from 1989
- 944 2.5 Turbo 220 hp from 1986 to 1988
- 944 2.5 Turbo S / Cup 250 hp from 1988
- 944 2.5 Turbo 250 hp from 1989 to 1991
- 944 3.0 S2 - 211 hp from 1989 to 1991

Oil cooler seal to which the oil filter is screwed. German quality, it fits all Porsche 924 :

- 924 2.5 S - 150 hp from 1986 to 1987
- 924 2.5 S - 160 hp of 1988

Oil cooler seal to which the oil filter is screwed. German quality, it fits all Porsche 968 :

- 968 3.0 from 1992 to 1995
- 968 3.0 Club Sport from 1993 to 1995

Oil strainer seal for Porsche 356 pre A, A, B and C :

-> Porsche 356 pre-A :
- 356 1100 - 40 hp (369) from 1950 to 1954
- 356 1300 - 44 hp (506 and 506/2) from 1951 to 1955
- 356 1300 S - 60 hp (589 and 589/2) from 1954 to 1955
- 356 1500 Cabriolet - 60 cv (527) from 1952
- 356 1500 - 55 hp (546 and 546/2) from 1953 to 1955
- 356 1500 S - 70 hp (528 and 528/2) from 1953 to 1955

-> Porsche 356 A :
- 356 A 1300 - 44 hp (506/1) from 1956 to 1957
- 356 A 1300 S - 60 hp (589/2) from 1956 to 1957
- 356 A 1600 - 60 hp (616/1) from 1956 to 1959
- 356 A 1600 S - 75 hp (616/2) from 1956 to 1959

-> Porsche 356 B T5 :
- 356 B 1600 - 60 hp (616/1) from 1960 to 1961
- 356 B 1600 S - 75 hp (616/2) from 1960 to 1961
- 356 B 1600 Super 90 - 90 hp (616/7) from 1960 to 1961

-> Porsche 356 B T6 :
- 356 B 1600 - 60 hp (616/1) from 1962 to 1963
- 356 B 1600 S - 75 hp (616/12) from 1962 to 1963
- 356 B 1600 Super 90 - 90 hp (616/7) from 1962 to 1963

-> Porsche 356 C :
- 356 C 1600 - 75 hp (616/15) from 1964 to 1965
- 356 SC 1600 - 95 hp (616/16) from 1964 to 1965

Quantity needed per vehicle : 2

Sold per unit

Oil filter console gasket for:
- 914-4

This o-ring is located between the sleeve of the oil tank and the oil filter holder. It is suitable for Porsche 911 from 1965 to 1973 :

- 911 2.0 from 1965 to 1968
- 911 2.0 T / L / E / S from 1967 to 1969
- 911 2.2 T / E from 1970 to 1971
- 911 2.4 T / E / S from 1973
- 911 2.7 Carrera RS from 1973

It provides a seal between the oil filter bracket and the oil tank.